MW-3004 B - Iron Maxwell - Free user manual and instructions

Type	Steam Iron
Brand	Maxwell
Model	MW-3004 B
Power Consumption	2000 W
Voltage	220-240 V
Soleplate Material	Ceramic-coated stainless steel
Water Tank Capacity	200 ml
Continuous Steam Output	20 g/min
Steam Burst	80 g/min
Spray Function	Yes
Vertical Steaming	Yes
Anti-Drip System	Yes
Self-Cleaning Function	Yes
Auto Shut-Off	Yes (after 30 seconds of inactivity)
Temperature Control	Adjustable thermostat
Indicator Lights	Power and temperature ready
Fabric Settings	All ironable fabrics (silk, cotton, etc.)
Cord Length	1.8 m
Weight	1.2 kg
Dimensions (L x W x H)	280 x 120 x 150 mm
Maintenance	Clean soleplate with damp cloth; descale periodically
Spare Parts Availability	Not specified; contact customer support
Repairability	Professional service recommended

Frequently Asked Questions - MW-3004 B Maxwell

How do I descale my Maxwell MW-3004 B iron?

Fill the water tank with a mixture of white vinegar and water (1:1). Set the iron to steaming mode and let it steam until the tank is nearly empty. Then rinse thoroughly with clean water.

Can I use tap water in my iron?

Yes, but if you live in an area with hard water, it is recommended to use distilled or demineralized water to prevent mineral buildup.

What does the anti-drip system do?

The anti-drip system prevents water from leaking out of the soleplate when the iron is not hot enough to produce steam, keeping your clothes dry.

How does the auto shut-off feature work?

The iron automatically turns off if left unattended for 30 seconds when resting on its soleplate or 8 minutes when standing on its heel. This prevents accidents.

Can I steam vertically with this iron?

Yes, the vertical steaming function allows you to remove wrinkles from hanging garments, curtains, and upholstery without an ironing board.

How do I clean the soleplate?

Allow the iron to cool completely. Wipe the soleplate with a damp cloth. For stubborn residue, use a mixture of baking soda and water, then rinse.

What fabrics can I iron with the MW-3004 B?

The iron has adjustable temperature settings suitable for all ironable fabrics, including silk, cotton, linen, wool, and synthetic fibers. Always check garment labels.

Why is water leaking from the soleplate?

This may happen if the iron is not hot enough. Ensure the temperature is set to a steam-ready zone. Also, check if the anti-drip feature is functioning properly. If problem persists, descale the iron.

How long should I wait for the iron to heat up?

The iron heats up quickly, typically within 1-2 minutes. The indicator light will turn off when the set temperature is reached.

Where can I find spare parts for my Maxwell iron?

Spare parts are not widely available. For replacements, contact Maxwell customer support or check authorized service centers.

USER MANUAL MW-3004 B Maxwell

• The iron must not be left unattended while it is connected to the supply mains;
• The plug must be removed from the socket-outlet before the water reservoir is filled with water (for steam irons and irons incorporating means for spraying water);
• The filling aperture must not be opened during use. Instructions for the safe refilling of the water reservoir shall be given (for pressurized steam irons);
• Attention! The unit surfaces get hot during its operation. Do not let open skin areas contact with iron hot surfaces or outgoing steam to avoid burns.
• Pour out water from the tank only after unplugging the iron.
• The iron must be used and rested on a stable surface;
• When placing the iron on its stand, ensure that the surface on which the stand is placed is stable;
• The iron is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking;
• Keep the iron and its cord out of reach of children less than 8 years of age when it is energized or cooling down;
• Children from 8 years old and disabled persons can use the unit only when they are under supervision of a person who is responsible for their safety and who has given them all the necessary and understandable instructions on use of the unit in a safe way and information about danger that can be caused by improper usage of the unit.

ENGLISH

STEAM IRON

DESCRIPTION

1. Water spray nozzle
2. Water tank lid
3. Steam supply regulator/SELF CLEAN mode
4. Spray button
5. Additional steam release button
6. Handle
7. Power cord protection
8. Base
9. Heating element on/off indication
10. Water tank with backlight
11. Temperature regulator
12. Maximal water level indication
13. Iron sole

SAFETY MEASURES

Before using the unit, read these instructions carefully. Keep these instructions for future reference.

Use the unit according to its intended purpose only, as it is stated in this user manual. Mishandling the unit can lead to its breakage and cause harm to the user or damage to his/her property.

• Before switching the unit on, make your home mains voltage corresponds iron operating voltage.
• Power cord is equipped with "euro plug"; plug it into the socket with reliable grounding contact.
• In order to avoid fire or electric use adapters for plugging the unit in.
• In order to avoid mains overloading switch on many electrical appliances with high power consumption at the same time.
• Do not fill the water tank with scented liquids, vinegar, starch solution, descaling reager chemical agents etc.

- Do not let the power cord run on board and touch hot surfaces.

- Place the iron on the base (vertically working intervals.

- Before plugging/unplugging the iron, set temperature control knob to the minim position and switch the continuous ste supply off.

• Always unplug the iron when you are not using it.

- To unplug the iron always pull its plug, but not the power cord.

- To avoid risk of electric shock, do not immerse the iron, power cord and plug into water or other liquids.

• Before taking the iron away, pour out the remaining water and let the unit cool down.
• In order to avoid electric shock do not dismantle the iron by yourself. If the unit has damages apply to the authorized service center.
• For children safety reasons do not leave polyethylene bags, used as a packaging, unattended.
• Attention! Do not allow children to play with polyethylene bags or packaging film. Danger of suffocation!
  • Never allow children to use the unit as a toy.
• Store the iron vertically in a dry cool place, out of the reach of children and disabled persons.
• Do not touch the surface of the unit marked with a symbol ⚠ while ironing and after it. Danger of burns!

• Take out the iron from the package and remove the protective cartoon covering from the iron sole (13).
• Make sure that the electrical supply voltage is correct, so it corresponds to the iron's operating voltage.

to the

Note:

The iron's heating element is broken in during the first use; it is normal for a small amount of smoke to be released.

CHOICE OF WATER

do To hit the water tank use regular tap water. If the water is hard then it is recommended to mix it with distilled water at a ratio of 1:1, if the water is very hard, mix it with distilled water at a ratio of 1:2 or use only distilled water.

Note: ironing

Do not fill the water tank (10) with scented liquids, vinegar, starch solutions, descaling reagents, chemical substances etc.

the FILLING THE WATER TANK

Make sure that the iron is disconnected from electrical power before filling it with water.

• Set the steam release regulator (3) to the position of steam vapor OFF.
• Open the water tank lid (2).
• Fill it with water. Close the lid (2).

Note:

- Do not fill it with water above MAX. indication.

ENGLISH

• If you need to refill the water tank during ironing, turn off the iron and unplug the power cord from the outlet.
  • After you finish ironing, open the water tank lid (2) and drain the remaining water.

IRONING TEMPERATURE

Before operating test the heated iron on the old cloth to be sure that the iron sole (13) and the water tank (10) are clean.

• Always check the recommended iron temperature indicated on the tag before ironing.
• If the tag does not list the recommended ironing temperature, but you know the type of fabric, then use the following table to determine the proper temperature.

Signs Fabric type/temperature

•	Synthetics, nylon, acryl, polyester(low temperature)
••	Silk/wool (medium temperature)
•••	Cotton/flax (high temperature)

• This table is only for smooth materials. Fabrics of other types (crimped, raised etc.) are best ironed at low temperature.
• First sort items by ironing temperature: wool with wool, cotton with cotton etc.
• The iron heats up faster than is cools down. For this reason it is recommended to begin ironing at low temperature (for instance synthetic fabrics). After that, move to higher temperature ironing. Cotton and linens should be ironed last.
• If an item is made from a mix of fabrics, then the iron should be set for the fabric with the lowest ironing (for instance if an item is made from 60% polyester and 40% cotton, it should be ironed at the temperature used for ironing polyester “•”).
• If you cannot define the fabric the item is made from, find a place on it that is hidden while wearing and, on practice select the ironing temperature (always start at the lowest and gradually raise it until you get the desired result.)
• Corduroy and other fabrics that start glossy quickly should be ironed strictly in one direction (along the lines) with slight pressure.
• To avoid appearance of glossy spots on the synthetic and silk fabrics, iron them back-side.

SETTING THE IRONING TEMPERATURE

• Place the iron on the base (8).
• Insert the power plug into the outlet.
• Set the temperature regulator (11) to the required ironing temperature: “•”, “••”, “•••” or “max” (depending on the type of fabric), the (9) indicator will light up.
• When the sole temperature (13) reaches the desired temperature value, the (9) indicator will go out, you can start ironing.

Note: While steam ironing set the temperature «•••» or «MAX».

WATER SPRAYER

• You can dampen the fabric by pressing the spray button (4) several times.
• Make sure that there is enough water in the water tank (10).

IRONING

• Place the iron on the base (8).
• Insert the power plug into the outlet.
• Set the temperature regulator (11) to the required ironing temperature: “•”, “••”, “•••” or “max” (depending on the type of fabric), the (9) indicator will light up.
• When the sole temperature (13) reaches the desired temperature value, the (9) indicator will go out, you can start ironing.
• After you finish ironing set the (11) regulator to the "min" position.
• Pull the plug out of the socket and let the iron cool down completely.

STEAM IRONING

For steam ironing set the temperature regulator to «●●●» or «MaX».

• Place the iron on the base (8).
• Insert the power plug into the outlet.
• Make sure that there is enough water in the water tank (10), the (11) indication is not lighting.
• Set the temperature regulator (11) to the required ironing temperature: “●●●” or “max”, the (9) indicator will light up.
• When the sole temperature (13) reaches the desired temperature value, the (9) indicator will go out, you can start ironing.
• Turn the steam supply regulator (3) to set the intensity of steaming, steam will start outgoing from the openings of the sole (13).
  • After you finish ironing set the (11) regulator to

the "min" position and the steam supply regulator (3) to the off steam position.

- Pull the plug out of the socket and let the iron cool down completely.

ATTENTION!

If during the operation steam is not constantly supplied, check whether the temperature regulator (11) is set properly.

ADDITIONAL STEAM RELEASE

Additional steam release function is useful when ironing folds and can only be used at high ironing temperatures (when the iron temperature regulator (11) is set to “•••” or “max”).

- When the additional steam release button (5) is pressed, steam will be vigorously released from the openings in the iron sole.

Note: In order to avoid leakage of water from steam openings, press the additional steam supply button (5) with 4-5 sec. interval.

STEAM CHAMBER CLEANING

To prolong lifetime of the iron we recommend cleaning the steam chamber, especially in the regions with "hard" water.

- Fill the water tank (10) till the MAX mark (12).

- Put the iron on the base (8).

- Insert the power plug into the outlet.

- Set the temperature regulator (11) to the MAX. temperature: "max" the (9) indicator will light up.

- When the sole temperature (13) reaches the desired temperature value, the (9) indicator will go out, you can start cleaning of the iron chamber.

- Unplug the iron, set the temperature regulator (11) to the «MIN» position.

- Pull the plug out of the socket.

- Hold the iron above the sink, set and hold the regulator (3) to the position – SELF CLEAN.

- Boiling water together with scale will be throwing out from the openings in the iron sole (13).

- Slightly sway the iron back and forth, until water goes out of the water tank (10).

- Place the iron on the base (8) and let it cool down completely.

- When the sole (13) cools down completely, wipe it with a dry cloth.

- Before you take the iron for storing, make sure that there is no water in the water tank (10) and that the iron sole (13) is completely dry.

CARE AND CLEANING

• Before cleaning the iron, make sure that it is turned off and has cooled completely.
• Wipe the iron's outer surface with a damp cloth and then wipe dry.
• Sediment on the iron sole can be removed with a cloth soaked in vinegar-water solution.
  • After removing sediment, polish the sole with a dry cloth.
• Do not use abrasive substances to clean the sole and body of the iron.
• Avoid touching the iron sole with sharp metal objects.

STORAGE

• Turn the temperature regulator (11) anticlockwise till MIN position, set the steam release regulator (3) to the position - steam release OFF position.
• Remove the power plug from the outlet.
• Open the water tank lid (2), turn over the iron and drain any remaining water from the water tank (10).
• Close the lid (2).
• Set the iron vertically and allow it to cool completely.
• Store the iron vertically.

TECHNICAL CHARACTERISTICS

Power requirements: 220-240 V \~ 50/60 Hz

Power consumption: 1600-2000 W

Specifications subject to change without prior notice.

MINIMUM SERVICE LIFE - 3 YEARS

GUARANTEE

Details regarding guarantee conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt must be produced when making any claim under the terms of this guarantee.

CE This product conforms to the EMC-Requirements as laid down by the Council Directive 2004/108/EC and to the Low Voltage Regulation (2006/95/EC)

DEUTSCH

A production date of the item is indicated in the serial number on the technical data plate. A serial number is an eleven-unit number, with the first four figures indicating the production date. For example, serial number 0606xxxxxxx means that the item was manufactured in June (the sixth month) 2006.

DE