MW-3056 B - Iron Maxwell - Free user manual and instructions

Product Type	Steam Iron
Brand	Maxwell
Model	MW-3056 B
Power	2400 W
Voltage	220-240 V
Frequency	50/60 Hz
Water Tank Capacity	300 ml
Soleplate Type	Ceramic
Steam Output	Up to 40 g/min
Spray Function	Yes
Anti-Drip	Yes
Self-Clean	Yes
Auto Shut-Off	Yes, after 8 minutes of inactivity
Cord Length	2 m
Weight	1.2 kg
Dimensions (L x W x H)	30 x 12 x 15 cm
Color	Black/Blue
Material	Plastic body, Ceramic soleplate
Safety Features	Thermal fuse, Auto shut-off
Warranty	2 years
Country of Origin	China

Frequently Asked Questions - MW-3056 B Maxwell

How do I descale the iron?

Use the self-clean function: fill the tank with water, set to max temperature, unplug, hold over sink, press and hold the self-clean button. Repeat monthly.

Why is the iron not producing steam?

Check if the water tank is filled and the temperature dial is set to steam zone (2-3 dots). Also ensure the steam button is pressed. If still no steam, descale the iron.

What type of water should I use?

Tap water is fine, but to reduce mineral buildup, use a mixture of 50% tap water and 50% distilled water. Do not use pure distilled or chemically softened water.

How does the auto shut-off work?

The iron will automatically turn off if left horizontal for 30 seconds or vertical for 8 minutes. To restart, simply shake it or press the temperature dial.

Can I use the iron without water?

Yes, you can use it as a dry iron. Just set the temperature to the desired level and do not press the steam button.

How do I clean the soleplate?

Unplug the iron and let it cool. Wipe the soleplate with a damp cloth. For stubborn residue, use a non-abrasive cleaner or a paste of baking soda and water.

Why is water leaking from the iron?

This can happen if the temperature is too low for steam. Set the dial to cotton or linen (high heat) and wait until the soleplate is hot before pressing steam. Also ensure the anti-drip system is not blocked.

Is the iron dual voltage?

No, it is designed for 220-240 V only. Do not use it in countries with 110-120 V without a voltage converter, which may not be compatible.

How do I store the iron safely?

Allow the iron to cool completely, empty the water tank, and wrap the cord loosely. Store it upright on its heel rest in a dry place.

Can I replace the soleplate?

The soleplate is permanently attached and not replaceable. For damage, contact customer support for repair options.

USER MANUAL MW-3056 B Maxwell

- Do not use the iron after dropping it, in case of visible damages or leakage.

- Place the iron on a flat stable surface or use a stable ironing board.

- Do not use the iron if the power plug or the power cord is damaged or if there are other damages in the unit.

- Always take the power plug out of the mains socket before filling the water tank with water.

- The water inlet lid should be closed during ironing.

- Attention! The surfaces of the iron get hot during operation. To avoid burns, do not touch hot surfaces of the iron and do not expose open parts of your body to outgoing steam.

- Pour out water from the water tank only after unplugging the iron.

- Never leave the plugged in iron unattended.

- This unit is not intended for usage by children under 8 years of age.

- Place the unit out of reach of children under 8 years of age during the operation and cooling down.

- This unit is not intended for usage by people with physical, neural, mental disorders or with insufficient experience or knowledge, including children over 8. Such persons may use this unit only if they are under supervision of a person who is responsible for their safety and if they are given all the necessary and understandable instructions concerning the safe usage of the unit and information about danger that can be caused by its improper usage.

ENGLISH

STEAM IRON

The iron is intended for ironing clothes and bedding and for vertical steaming of fabrics.

Description

1. Water spray nozzle
2. Water inlet lid
3. Continuous steam supply knob
4. Burst of steam button
5. Water spray button
6. Handle
7. Power cord protection
8. Base of the iron
9. Pilot lamp of the heating element
10. Water tank
11. Temperature control knob
12. Self-clean button «Self Clean»
13. «MAX» maximum water level mark
14. Soleplate
15. Beaker

SAFETY MEASURES

Before using the unit, read this instruction manual carefully and keep it for future reference. Use the unit for intended purposes only, as specified in this manual. Mishandling the unit can lead to its breakage and cause harm to the user or damage to his/her property.

• Before switching the iron on, make sure that your home mains voltage corresponds to the iron operating voltage.
• The power cord is equipped with a euro plug; plug it into the socket with reliable grounding contact.
• To avoid fire or electric shock, do not use adapters for plugging the unit in.
• To avoid mains overloading, do not switch on several electrical appliances with high power consumption at a time.
• Do not fill the water tank with scented liquids, vinegar, starch solution, descaling reagents, chemicals etc.
• Do not let the power cord be on the ironing board and touch hot surfaces.
• Do not leave the unit unattended. During operation breaks put the iron on the base (in vertical position).

• Before plugging/unplugging the iron, set the temperature control knob to the minimum position and switch the continuous steam supply off.
  • Always unplug the iron when you are not using it.

• To unplug the iron, always hold the power plug, do not pull the power cord.

• To avoid electric shock, do not immerse the iron, the power cord and the plug into water or any other liquids.
  • Before taking the iron away, let it cool down completely and pour out the remaining water.
  • Clean the unit regularly.
• Do not immerse the unit body, the power plug or the power cord into water or other liquids.
• Do not touch the unit body and the power plug with wet hands.
• Do not allow children to touch the unit body and the power cord during the unit operation.
• Do not leave children unattended to prevent using the unit as a toy.
• For children safety reasons do not leave polyethylene bags used as packaging unattended.

Attention! Do not allow children to play with polyethylene bags or packaging film. Danger of suffocation!

• Do not disassemble the unit by yourself, if any malfunction is detected or after it was dropped, apply to the nearest authorized service center.
• Transport the unit in the original package only.
• Keep the unit out of reach of children and disabled persons.
• Do not touch the surface of the unit marked with the symbol ⚠ while ironing and after it. Danger of burns.

After unit transportation or storage under cold (winter) conditions, it is necessary to keep it for at least two hours at room temperature before switching on.

• Unpack the iron; remove the protection from the iron soleplate (14), if any.
• Check the unit for damages; do not use the iron in case of damages.
• Before switching the unit on, make sure that your home mains voltage corresponds to the unit operating voltage.

Note: When the iron is switched on for the first time the heating element of the iron

burns, therefore occurrence of foreign smell and a small amount of smoke is possible, it is normal.

Note: There may be water residue in the tank, this is normal, as the iron has undergone factory quality control

AUTOMATIC SWITCH-OFF FUNCTION

This model has two automatic switching off modes.

• If the iron remains still for 30 seconds in horizontal position, the heating element of the iron will be switched off, and you will hear a sound signal. The unit will be switched on automatically once you resume ironing.
• If the iron remains still for 8 minutes in vertical position, the heating element of the iron will be switched off, and you will hear a sound signal. The unit will be switched on automatically once you resume ironing.

WATER SELECTION

Use tap water to fill the tank. If tap water is hard, it is recommended to mix it with distilled water in proportion 1:1, if tap water is too hard, mix it with distilled water in proportion 1:2 or use distilled water only.

FILLING THE WATER TANK

Before filling the tank with water make sure that the unit is unplugged.

• Set the temperature control knob (11) to the «MIN» position and the continuous steam supply knob (3) to the position «·» (steam supply is off).
• Open the water inlet lid (2).
• Pour the water into the water tank (10) using the beaker (15), and then close the lid (2).

Notes:

• Do not fill the water tank (10) with scented liquids, vinegar, starch solution, descaling reagents, chemical agents etc.
• Do not exceed the «MAX» mark (13).
• If you need to refill water during ironing, switch the iron off and unplug it.

IRONING TEMPERATURE

• Always check the recommended ironing temperature indicated on the tag before ironing.
- If there is no tag with recommended ironing temperature, but you know the type of fabric, use the following table to determine the proper ironing temperature.

Symbol	Fabric type(temperature)
.	Synthetics, nylon, acrylic, polyester(low temperature)
·· Silk/wool	(medium temperature)
·· · Cotton	linen (high temperature)
max	Maximum temperature

• This table is only valid for smooth materials. Other types of fabrics (crimped, raised etc.) should be ironed at low temperature.
• Sort items by ironing temperature first: synthetics to synthetics, wool to wool, cotton to cotton etc.
• The iron heats up faster than it cools down. For this reason it is recommended to begin ironing at low temperature (for instance, synthetic fabrics).
• After that, start ironing at higher temperature (silk, wool). Cotton and linen items should be ironed last.
• If an item is made of mixed fabrics, the iron should be set to the lowest temperature (for instance, if an item is made from acrylic and cotton, it should be ironed at temperature used for acrylic ironing «•»).
• If you cannot define the fabric structure, find a place that is inconspicuous while wearing and select the ironing temperature experimentally (always start with the lowest temperature and raise it gradually until you get the desired result).
• Corduroy and other fabrics that become glossy quickly should be ironed strictly in one direction (in the direction of the pile) with little pressure.
  • To avoid appearance of glossy spots on synthetic and silk fabrics, iron them backside.

DRY IRONING

• Place the iron on its base (8).
• Insert the power plug into the mains socket.
• Set the continuous steam supply knob (3) to the position «•» (continuous steam supply is off).
• Set the desired ironing temperature by turning the knob (11): «•», «••», «•••» or «MAX»,

ENGLISH

depending on the type of fabric; the pilot lamp (9) will light up.

• Once the soleplate (14) reaches the set temperature, the pilot lamp (9) will go out and you can start ironing.
• After you finish ironing set the temperature control knob (11) to the «MIN» position.
• Pull the power plug out of the mains socket and let the iron cool down completely.

STEAM IRONING

Steam ironing is possible only if the temperature control knob (11) is set to the position «••», «•••» or «MAX».

The iron is provided with an anti-drip valve that stops the water supply if the soleplate temperature is too low, it prevents dripping from the openings of the soleplate (14). During heating and cooling of the iron soleplate, you may hear characteristic clicks of the anti-drip valve opening/closing, which indicates its normal operation.

• Place the iron on its base (8).
• Insert the power plug into the mains socket.
• Make sure that there is enough water in the water tank (10).
• Turn the control knob (11) to set the required ironing temperature: «••», «•••» or «MAX», the pilot lamp (9) will light up.
• When the soleplate (14) reaches the preset temperature value, the pilot lamp (9) will go out, you can start ironing.
• Set the necessary steam intensity (from «•» to «—») with the continuous steam supply knob (3).
• In the continuous steam supply mode, steam will be released from the openings of the soleplate (14) only if the iron is in horizontal position. To stop the steam supply, put the iron vertically or set the knob (3) to the position «•» (steam supply is off).
• After you finish ironing, set the temperature control knob (11) to the «MIN» position, and the continuous steam supply knob (3) to the position «•» (steam supply is off).
• Pull the power plug out of the mains socket and let the iron cool down completely.

ATTENTION!

If steam is not supplied constantly during the operation, check whether the steam supply control (3) is set properly and whether there is water in the water tank (10).

WATER SPRAY

• You can dampen the fabric by pressing the spray button (5) several times.
  • Make sure that there is enough water in the water tank (10).

BURST OF STEAM

The burst of steam function is useful for ironing folds and can only be used at high ironing temperatures (when the temperature control knob (11) is set to «MAX» position).

When the burst of steam button (4) is pressed, steam will go out of the soleplate (14) openings intensively.

Notes: To avoid water leakage from the steam openings, press the burst of steam button (4) with 4-5 sec. intervals.

To avoid dripping, do not hold the burst of steam button (4) longer than 5 seconds.

VERTICAL STEAM

The vertical steam function can be used only at high ironing temperatures (when the temperature control knob (11) is set to the «MAX» position). Hold the iron vertically at the distance of 10-30 cm from the clothes and press the burst of steam button (4) with a 4-5 seconds interval, steam will be released from the soleplate (14) intensively.

Important information

Vertical steam is not recommended for synthetic fabrics.

• To avoid fabric melting, do not touch it with the iron's soleplate while steaming.
• Never steam clothes on a person as the steam temperature is very high, use a clothes hanger or a stand.
• After you finish ironing, switch the unit off, wait until it cools down completely, then open the water inlet lid (2), turn over the iron and drain the remaining water.

STEAM CHAMBER CLEANING

To prolong service life of the iron we recommend to clean the steam chamber regularly, especially in the regions with hard tap water.

• Set the continuous steam supply knob (3) to the position « • » (steam supply is off).
• Fill the water tank (10) till the «MAX» mark (13).
• Place the iron on its base (8).

• Insert the power plug into the mains socket.

• Set the control knob (11) to the maximum soleplate temperature «MAX», the pilot lamp (9) will light up.

• Once the iron soleplate (14) reaches the set temperature, the pilot lamp (9) will go out. Wait until the iron soleplate is reheated, then you can start cleaning the steam chamber.
• Unplug the unit.
• Hold the iron above the sink horizontally, press and hold the «Self Clean» button (12).
• Boiling water and steam with scale will be released from the iron soleplate (14) openings.
• Slightly sway the iron back and forth, until all the water leaves the water tank (10).
• Place the iron on the base (8) and let it cool down completely.
• When the soleplate (14) cools down completely, wipe it with a dry cloth.
• Before you take the iron away for storage, make sure that there is no water in the water tank (10) and that the soleplate (14) is dry.

Cleaning and care

• Before cleaning the iron, make sure that it is unplugged and has cooled down completely.
• Clean the iron body with a slightly damp cloth and then wipe it dry.
• Scale on the iron soleplate can be removed with a cloth soaked in vinegar-water solution.
  • After removing scale, polish the soleplate surface with a dry cloth.
• Do not use abrasive substances and solvents to clean the iron soleplate and body.
• Avoid contact of the iron soleplate with sharp metal objects.

Storage

• Before you take the iron away for storage, clean it and drain all the remaining water from the water tank (10).
• Set the temperature control knob (11) to the «MIN» position, and the continuous steam supply knob (3) to the position «•» (continuous steam supply is off).
  • Wind the power cord on the base (8).
• Store the iron vertically in a dry cool place, out of the reach of children.

Delivery set

Iron - 1 pc.

Beaker - 1pc.

Instruction manual - 1 pc.

Technical specifications

Power supply: 220-240 V \~50 Hz

Maximal power consumption: 2200 W

The manufacturer reserves the right to change the specifications of the unit without a preliminary notification.

Unit operating life is 3 years

Guarantee

Details regarding guarantee conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt must be produced when making any claim under the terms of this guarantee.

This product conforms to the EMC-Requirements as laid down by the Council Directive 2004/108/EC and to the Low Voltage Regulation (2006/95/EC)

DEUTSCH

A production date of the item is indicated in the serial number on the technical data plate. A serial number is an eleven-unit number, with the first four figures indicating the production date. For example, serial number 0606xxxxxx means that the item was manufactured in June (the sixth month) 2006.

KZ