SKF 396 W - Fridge Scandomestic - Free user manual and instructions
Find the device manual for free SKF 396 W Scandomestic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Fridge-Freezer (Upright) |
| Brand | Scandomestic |
| Model | SKF 396 W |
| Total Net Capacity | 396 L (approx.) |
| Fridge Capacity | 280 L (approx.) |
| Freezer Capacity | 116 L (approx.) |
| Energy Efficiency Class | A+ |
| Annual Energy Consumption | 280 kWh (approx.) |
| Noise Level | 42 dB (approx.) |
| Climate Class | N-ST |
| Defrost Type | Auto defrost (fridge), Manual (freezer) |
| Control Type | Thermostat dial |
| Shelves Material | Glass |
| Door Reversibility | Yes (user reversible) |
| Door Alarm | Yes |
| Interior Light | LED |
| Power Supply | 220-240 V, 50 Hz |
| Dimensions (H x W x D) | 180 x 60 x 65 cm (approx.) |
| Weight | 70 kg (approx.) |
| Cleaning and Maintenance | Clean condenser coils annually; defrost freezer when ice >5 mm |
| Safety Features | Child lock (optional), overheat protection |
| Spare Parts Availability | Contact Scandomestic or authorized dealers |
| Repairability Index | 7.5/10 (estimated) |
Frequently Asked Questions - SKF 396 W Scandomestic
What is the ideal temperature setting for the fridge and freezer?
The recommended fridge temperature is between 2°C and 5°C. For the freezer, set it to -18°C or lower to safely store frozen food.
How do I reverse the door opening direction?
You can reverse the door by following the instructions in the manual. Typically, you need to remove the door hinges, swap the door handles, and reattach the hinges on the opposite side. Use a screwdriver and have a helper hold the door.
Why is my fridge not cooling properly?
Check if the temperature control is set correctly, ensure the door is closing tightly, and clean the condenser coils at the back. Also, avoid overloading and allow proper air circulation.
How often should I defrost the freezer?
Defrost the freezer when the ice buildup reaches 5 mm (0.2 inches) thickness. Depending on usage, this may be every 6-12 months. Do not use sharp tools to remove ice.
What type of light bulb does the interior use?
The interior light is an LED bulb. If it fails, contact a qualified technician or Scandomestic service for replacement.
Can I install the fridge in an unheated garage?
This model is rated for climate class N-ST, meaning it operates properly in ambient temperatures from 16°C to 38°C. Avoid installation in very cold (below 16°C) or hot (above 38°C) environments.
How do I adjust the temperature?
Use the thermostat dial inside the fridge compartment. Usually, a higher number means colder. Start at a medium setting and adjust based on your needs.
Why does my fridge make unusual noises?
Normal sounds include humming from the compressor, gurgling from refrigerant flow, and clicking when the thermostat cycles. If you hear loud buzzing or rattling, ensure the fridge is level and not touching the wall.
How do I clean the fridge?
Unplug the fridge, remove all food and shelves. Wipe interior with a mild detergent solution (baking soda and water). Avoid abrasive cleaners. Clean the condenser coils with a vacuum or brush annually.
Where can I find spare parts like shelves or door bins?
Contact Scandomestic customer service or visit notice-facile.com for spare parts information. Provide your model number SKF 396 W for accurate ordering.
User questions about SKF 396 W Scandomestic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Fridge in PDF format for free! Find your manual SKF 396 W - Scandomestic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SKF 396 W by Scandomestic.