IAN 281538 - Cooler CRIVIT - Free user manual and instructions
Find the device manual for free IAN 281538 CRIVIT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Crivit |
| Model Number | IAN 281538 |
| Product Type | Electric Cooler |
| Capacity | Approximately 20 liters |
| Power Supply | 12V DC (cigarette lighter socket) and 230V AC (via included adapter) |
| Cooling Technology | Thermoelectric (Peltier) or compressor (check model specifics) |
| Temperature Range | Typically -20°C to +20°C (adjustable) |
| Heating Function | Yes, capable of warming up to +60°C |
| Dimensions (W x D x H) | Approximately 50 x 30 x 35 cm |
| Weight | Approximately 4.2 kg |
| Material | Plastic exterior with foam insulation |
| Controls | Rotary dial or push button (depending on model) |
| Display | LED or LCD temperature display (if applicable) |
| Cooling Medium | No coolant required (thermoelectric) or small amount of refrigerant (compressor) |
| Noise Level | Approximately 35-45 dB |
| Portability | Carrying handles or telescopic handle with wheels (depending on version) |
| Energy Consumption | Typical 30-50 W in cooling mode, higher in heating |
| Cleaning and Care | Wipe with a damp cloth; do not immerse in water |
| Safety Features | Overheating protection, reverse polarity protection for 12V |
| Spare Parts Availability | Contact Crivit customer service; some parts may be available online |
Frequently Asked Questions - IAN 281538 CRIVIT
How do I switch between cooling and heating modes?
On most Crivit coolers, there is a switch labeled COOL/HEAT or similar. Set it to the desired mode. The cooler will automatically maintain the selected temperature. Note that heating uses more power.
Can I use this cooler with both 12V and 230V?
Yes, the model IAN 281538 includes both a 12V car adapter and a 230V mains adapter. Ensure you use the correct cable for your power source.
What is the maximum cooling capacity (difference from ambient)?
Thermoelectric models (common in Crivit coolers) can cool approximately 15-20°C below ambient temperature. In hot climates, pre-chilling contents helps.
How do I clean the cooler?
Unplug the unit. Wipe the interior and exterior with a damp cloth and mild detergent. Do not use abrasive cleaners or immerse the cooler in water. Allow to dry before storing.
Why is my cooler not cooling?
Check that the power cable is connected properly and the power source is on. Ensure the mode switch is set to COOL. For 12V operation, check the car fuse and that the engine is running (to avoid battery drain). If using 230V, verify the adapter is working.
How much power does it consume?
In cooling mode, typical power consumption is 30-50W. In heating mode, it can be up to 60-80W. Actual consumption depends on ambient temperature and usage.
Can I leave it plugged in overnight?
Yes, you can leave it plugged in continuously when connected to 230V mains. For 12V car use, it is recommended to run the engine periodically to avoid discharging the car battery.
What is the temperature range?
The adjustable thermostat allows a range from approximately -20°C to +20°C (cooling) and +30°C to +60°C (heating). Exact settings vary by model.
How much weight can I put inside?
Do not exceed the maximum load capacity of the cooler. Typically, a 20-liter cooler can hold up to 15 kg of contents. Overloading may affect performance.
Where can I find spare parts or service?
Contact Crivit customer service via their website or the instructions manual. Some spare parts like cables or internal fans may be available for purchase online.
User questions about IAN 281538 CRIVIT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Cooler in PDF format for free! Find your manual IAN 281538 - CRIVIT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IAN 281538 by CRIVIT.
