Q: How do I set the time on a Danfoss TP7000 programmable thermostat?

Setting the time on the Danfoss TP7000: The Danfoss TP7000 programmable thermostat has several control buttons: PROG, DAY, NEXT, COPY, and the + and - buttons. To set the time correctly, here is the detailed procedure: Step 1 - Access the programming menu: Press the PROG button to start programming. Step 2 - Select the day: Press the DAY button until the correct day appears on the screen (1 = Monday, 2 = Tuesday, 3 = Wednesday, 4 = Thursday, 5 = Friday, 6 = Saturday, 7 = Sunday). Step 3 - Set the time: Use the + and - buttons to adjust the time. For quicker adjustments (in 10-minute increments), hold the button down. Step 4 - Change the display format: If you want to change the clock display format (12 h or 24 h), press NEXT & DAY simultaneously for 2 to 3 seconds. In 12-hour mode, AM (morning) or PM (afternoon) will be displayed. Step 5 - Validation: Once the time and day are set correctly, close the front cover of the thermostat. After 2 minutes, the settings will be automatically accepted, and the thermostat will display blinking colons, confirming that the device is in RUN mode. Important: Always check that the time is correct, as it is essential for the proper functioning of your programmed heating schedule. In particular, do not forget to adjust the time during seasonal time changes (switching to daylight saving time or standard time).

Question 1

What does the error message OF mean on the DANFOSS RET B + RF thermostat?

Accepted Answer

The OF message on the display of the DANFOSS RET B + RF thermostat means that the device is inoperative. This message appears when you have not replaced the batteries within 15 days following the low battery alert.

What to do:

Replace the batteries as soon as you see the battery icon on the screen
You have a grace period of 15 days after the first alert
If the deadline is exceeded and "OF" is displayed, replacing the batteries should restore normal operation
After replacing the batteries, the message disappears and the thermostat resumes its operation

Question 2

How to display the ambient temperature on the Danfoss TP7000 programmable thermostat?

Accepted Answer

To display the ambient temperature on your Danfoss TP7000 programmable thermostat, follow these steps:

Turn on the thermostat if you haven't done so already.
Look at the main screen: the ambient temperature is usually continuously displayed on the main screen of the thermostat.
If the temperature does not appear, press the Home or Mode button to return to the standard display where the ambient temperature is visible.
Check the operating mode: make sure the thermostat is not in programming or setting mode, as these modes can hide the display of the ambient temperature.

By following these steps, you should be able to easily view the ambient temperature in the room on your Danfoss TP7000.

Question 3

How do I set the time on a Danfoss TP7000 programmable thermostat?

Accepted Answer

Setting the time on the Danfoss TP7000:

The Danfoss TP7000 programmable thermostat has several control buttons: PROG, DAY, NEXT, COPY, and the + and - buttons. To set the time correctly, here is the detailed procedure:

Step 1 - Access the programming menu: Press the PROG button to start programming.
Step 2 - Select the day: Press the DAY button until the correct day appears on the screen (1 = Monday, 2 = Tuesday, 3 = Wednesday, 4 = Thursday, 5 = Friday, 6 = Saturday, 7 = Sunday).
Step 3 - Set the time: Use the + and - buttons to adjust the time. For quicker adjustments (in 10-minute increments), hold the button down.
Step 4 - Change the display format: If you want to change the clock display format (12 h or 24 h), press NEXT & DAY simultaneously for 2 to 3 seconds. In 12-hour mode, AM (morning) or PM (afternoon) will be displayed.
Step 5 - Validation: Once the time and day are set correctly, close the front cover of the thermostat. After 2 minutes, the settings will be automatically accepted, and the thermostat will display blinking colons, confirming that the device is in RUN mode.

Important: Always check that the time is correct, as it is essential for the proper functioning of your programmed heating schedule. In particular, do not forget to adjust the time during seasonal time changes (switching to daylight saving time or standard time).

Question 4

Why does my DANFOSS TP5001 thermostat beep from time to time?

Accepted Answer

The DANFOSS TP5001 thermostat may emit intermittent beeps for several reasons. Here are the most common causes:

Temperature alert: The beep may indicate that the ambient temperature is outside the programmed range, meaning that the heating or cooling system is operating to regulate the temperature.
Low battery: If your thermostat is battery-powered, a beep may indicate that the batteries are low and need to be replaced quickly to ensure optimal operation.
Operational error: A beep may also signal a malfunction or technical error. In this case, check the display for any error messages or specific indications.

What to do?

Check that the ambient temperature is in line with your settings.
Check and replace the batteries if necessary.
Look for any error messages or alerts on the thermostat's display.

If the beeping persists despite these checks, it may be helpful to contact a professional for a more in-depth diagnosis.

User manual DANFOSS : user manuals and guides in PDF

Models DANFOSS most viewed

Browse manuals DANFOSS by appliance type

Recent questions about devices DANFOSS