MP08 - Remote control DANFOSS - Free user manual and instructions
Find the device manual for free MP08 DANFOSS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Remote Control |
| Brand | Danfoss |
| Model | MP08 |
| Dimensions (L x W x H) | Approx. 150 x 50 x 25 mm |
| Weight | Approx. 100 g (without batteries) |
| Power Supply | 2 x AAA batteries (1.5 V) |
| Battery Life | Approx. 12 months under normal use |
| Operating Range | Up to 8 meters |
| Frequency Band | Infrared (IR) |
| Compatible Devices | Danfoss heating systems and thermostats |
| Main Functions | Power on/off, temperature adjustment, mode selection, timer settings |
| Display | LCD screen with backlight |
| Buttons | 12 tactile buttons including arrow keys and OK |
| Indicators | Battery low indicator, transmission indicator |
| Programming | Automatic pairing with compatible receivers |
| Cleaning | Wipe with a soft, dry cloth; avoid liquids |
| Storage Temperature | -20°C to 50°C |
| Operating Temperature | 0°C to 40°C |
| Safety Notes | Do not expose to moisture, direct heat, or drop |
| Spare Parts | Battery cover (order reference: MP08-BCOVER) |
| Repairability | Repair by authorized service center only |
| Warranty | 2 years from purchase date |
| Manual Languages | English, multiple others available online |
Frequently Asked Questions - MP08 DANFOSS
How do I pair the MP08 remote control with my Danfoss thermostat?
Ensure batteries are installed. Press and hold the OK button for 5 seconds until the pairing icon appears. Then press the pairing button on the thermostat. The remote will confirm with a beep.
What type of batteries does the MP08 require?
The remote uses 2 AAA alkaline batteries (1.5 V). Avoid rechargeables as voltage may be insufficient.
The remote display shows 'LO' or is blank. What should I do?
'LO' indicates low battery. Replace both batteries with new ones. If blank, check battery orientation and contacts.
Can I use the MP08 with other brands of heating systems?
No, the MP08 is designed exclusively for Danfoss heating systems and thermostats. Compatibility is not guaranteed with other brands.
How do I set the timer on the MP08?
Press the Timer button. Use the arrow keys to set hours and minutes, then press OK to confirm. The timer icon will appear on the display.
What is the maximum operating distance?
The infrared signal works up to 8 meters in a clear line of sight. Walls or obstacles will reduce range.
How should I clean the remote control?
Wipe the surface with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners. Keep the IR window clean.
The remote is not responding. How can I reset it?
Remove the batteries for 30 seconds, then reinsert. If still unresponsive, try a factory reset: press and hold the Mode and Down buttons simultaneously for 10 seconds.
Is the MP08 waterproof?
No, the remote is not waterproof. Keep it away from moisture, rain, and high humidity. Store indoors.
Where can I download the full user manual?
Visit notice-facile.com and search for 'Danfoss MP08'. The manual is available in PDF format free of charge.
User questions about MP08 DANFOSS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Remote control in PDF format for free! Find your manual MP08 - DANFOSS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MP08 by DANFOSS.
USER MANUAL MP08 DANFOSS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DANFOSS
Model : MP08
Category : Remote control