Q: How to properly install the ISOFIX hooks on the KIDDY PHOENIXFIX PRO 2 car seat?

To properly install the ISOFIX hooks on your KIDDY PHOENIXFIX PRO 2 car seat, start by positioning the seat on the rear seat of your vehicle. Then check that the ISOFIX anchor points of your car are clearly visible and accessible between the backrest and the seat base. These points are usually identified by a small logo or an ISOFIX label. Locate the two levers or buttons on the PHOENIXFIX PRO 2 that allow you to deploy the ISOFIX hooks. Pull these levers to extend the metal hooks from their folded position. On both sides of the seat, the hooks should project forward until they easily align with the vehicle's anchor points. Next, push the car seat backward with a firm and controlled motion to engage the ISOFIX hooks into your vehicle's anchor points. You should hear or feel a distinct click confirming the correct engagement. A practical feature of the PHOENIXFIX PRO 2 is the fixation indicator light that turns green once the seat is securely locked, visually confirming that the installation is secure. Check the installation by gently pulling the car seat in different directions to ensure it does not move. The seat should remain stationary and well anchored to the vehicle seat. This step is essential to ensure your child's safety while driving. If you do not see the ISOFIX hooks despite the presence of the ISOFIX logo on your vehicle's seat, it is possible that the seat cover is covering them. In this case, you can gently open the seams at the marked "Isofix" locations with a cutter and insert the two plastic tips provided with the PHOENIXFIX PRO 2 to complete the installation. The PHOENIXFIX PRO 2 also offers the option to adjust the seat's tilt by modifying the position of the ISOFIX arms. This flexibility allows you to find the optimal position for your child's comfort while maintaining maximum safety.

Question 1

Can the Kiddy Evoluna 2 be installed without an Isofix base?

Accepted Answer

No, the Kiddy Evoluna 2 cannot be installed without an Isofix base. The manufacturer's manual is explicit: "Never secure the Evoluna i-Size 2 using the vehicle's seat belt." Installation with the vehicle's seat belt is not permitted.

The Kiddy Evoluna 2 is certified according to the i-Size standard (ECE-R129), which mandates the use of an Isofix base. This base is essential for the child's safety, as it provides a secure anchorage and shock absorption systems.

To use this car seat in a vehicle, you must absolutely:

Have a compatible Isofix base installed in your vehicle
Check that your vehicle has Isofix anchorage points (usually between the cushions of the rear seats)
Ensure that your vehicle model is on the compatibility list (available at www.kiddy.de/typelist_isofixbase)

If your vehicle does not have Isofix points, unfortunately, the Kiddy Evoluna 2 will not be suitable. This restriction is a safety requirement that cannot be circumvented.

Alternative: If you need a car seat without Isofix, you will need to choose another model of car seat compatible with your vehicle's seat belt.

Question 2

Is the KIDDY PHOENIXFIX PRO 2 car seat suitable for a 4-year-old child?

Accepted Answer

Yes, the KIDDY PHOENIXFIX PRO 2 car seat is suitable for a 4-year-old child, provided that their weight is within the seat's limits. This seat is designed to accommodate children from group I to group III, from 9 months up to approximately 12 years old.

For a 4-year-old child, two configurations are possible depending on their weight:

Group I (9 to 18 kg): If your 4-year-old weighs less than 18 kg, the impact shield must be used. The seat has two adjustment levels: level A (9-13 kg) with the cushion folded, and level B (13-18 kg) with the cushion unfolded. This configuration offers optimal protection for children of this age.
Group II (15 to 25 kg): If your child weighs 15 kg or more, the impact shield can be removed and the seat is used only with the vehicle's 3-point seatbelt. This transition is possible from around 4 years old.

Before each use, check that your child is properly secured by the 5-point safety harness (in group I) or by the vehicle's seatbelt (in groups II and III). The seat is installed using the Isofix system with Top Tether, ensuring a stable and secure attachment. Adjust the resting position if necessary, but this function is only available for group I (9-18 kg).

The KIDDY PHOENIXFIX PRO 2 complies with the ECE R44/04 safety standard and offers enhanced side protection. Remember that the removable seat cushion facilitates the transition between weight groups: you must remove it when moving to group II.

Question 3

Can the KIDDY PHOENIXFIX PRO 2 car seat be used without the protective shield?

Accepted Answer

The KIDDY PHOENIXFIX PRO 2 car seat can only be used without the protective shield under certain specific conditions. For children weighing 9 to 18 kg (approximately 9 months to 4 years), the shield is mandatory. This is Group I, and the use of the shield is required by ECE R44/04 safety standards.

From 15 kg (approximately 4 years), the use of the shield becomes optional. However, the manufacturer strongly recommends keeping the shield until your child reaches 18 kg for optimal protection. You can then remove the shield for children in Groups II and III (15 to 36 kg).

The shield plays a crucial role in safety: it absorbs forces during a frontal collision and keeps the child securely positioned. When the shield is in place, it must be adjusted so that it rests firmly against the child's abdomen. Once removed, the vehicle's three-point seatbelt becomes the only restraint system.

To comply with safety guidelines, always check your child's current weight. As long as it is below 15 kg, the shield should never be removed. Beyond 15 kg, you have a choice, but keep in mind that the shield offers superior protection up to 18 kg.

Question 4

How to properly install the ISOFIX hooks on the KIDDY PHOENIXFIX PRO 2 car seat?

Accepted Answer

To properly install the ISOFIX hooks on your KIDDY PHOENIXFIX PRO 2 car seat, start by positioning the seat on the rear seat of your vehicle. Then check that the ISOFIX anchor points of your car are clearly visible and accessible between the backrest and the seat base. These points are usually identified by a small logo or an ISOFIX label.

Locate the two levers or buttons on the PHOENIXFIX PRO 2 that allow you to deploy the ISOFIX hooks. Pull these levers to extend the metal hooks from their folded position. On both sides of the seat, the hooks should project forward until they easily align with the vehicle's anchor points.

Next, push the car seat backward with a firm and controlled motion to engage the ISOFIX hooks into your vehicle's anchor points. You should hear or feel a distinct click confirming the correct engagement. A practical feature of the PHOENIXFIX PRO 2 is the fixation indicator light that turns green once the seat is securely locked, visually confirming that the installation is secure.

Check the installation by gently pulling the car seat in different directions to ensure it does not move. The seat should remain stationary and well anchored to the vehicle seat. This step is essential to ensure your child's safety while driving.

If you do not see the ISOFIX hooks despite the presence of the ISOFIX logo on your vehicle's seat, it is possible that the seat cover is covering them. In this case, you can gently open the seams at the marked "Isofix" locations with a cutter and insert the two plastic tips provided with the PHOENIXFIX PRO 2 to complete the installation.

The PHOENIXFIX PRO 2 also offers the option to adjust the seat's tilt by modifying the position of the ISOFIX arms. This flexibility allows you to find the optimal position for your child's comfort while maintaining maximum safety.

User manual KIDDY : user manuals and guides in PDF

Models KIDDY most viewed

Browse manuals KIDDY by appliance type

Recent questions about devices KIDDY