Q: What does the lower right sensor of the WS 1815 weather station display?

The lower right corner of the screen displays the relative humidity (RH %) of your interior. This percentage indicates the level of humidity in the ambient air. The main reading fields of your ADE WS 1815 station are: Top left: indoor temperature (in °C or °F depending on setting) Bottom right: relative humidity (RH %) Bottom: four animated weather forecast symbols (sunny, partly cloudy, cloudy, rainy) Top right: thermal comfort (temperature-humidity combination) Center: date and time (12/24 hour formats) To view the maximum and minimum humidity values recorded over the last 24 hours, press the MAX/MIN button once (for maximum) and then twice (for minimum). The station also displays a bar graph showing the humidity history over 12 hours, accessible via the MODE and UP/DOWN buttons.

Q: How to disable DST (Daylight Saving Time) on the CK 1720?

The CK 1720 does not have a button to manually disable Daylight Saving Time (DST) . The adjustment between Daylight Saving Time and Standard Time is done entirely automatically thanks to the DCF77 radio signal. When Daylight Saving Time is active, a dot appears next to the “DST” symbol on the clock display. This dot disappears automatically when switching to Standard Time. If you notice a one-hour discrepancy: Check that the clock is correctly receiving the DCF77 signal (long-wave reception 77.5 kHz) If you need to set the time manually, make sure to select the correct time zone offset in the settings In summary: DST is managed automatically by the device. You cannot disable it, but it adjusts itself during the time changes.

Question 1

What does the lower right sensor of the WS 1815 weather station display?

Accepted Answer

The lower right corner of the screen displays the relative humidity (RH %) of your interior. This percentage indicates the level of humidity in the ambient air.

The main reading fields of your ADE WS 1815 station are:

Top left: indoor temperature (in °C or °F depending on setting)
Bottom right: relative humidity (RH %)
Bottom: four animated weather forecast symbols (sunny, partly cloudy, cloudy, rainy)
Top right: thermal comfort (temperature-humidity combination)
Center: date and time (12/24 hour formats)

To view the maximum and minimum humidity values recorded over the last 24 hours, press the MAX/MIN button once (for maximum) and then twice (for minimum).

The station also displays a bar graph showing the humidity history over 12 hours, accessible via the MODE and UP/DOWN buttons.

Question 2

Why is the outdoor sensor not connecting to the station?

Accepted Answer

Here are the steps to restore the connection of the external sensor:

Pre-checks

Install 2 AA batteries in the sensor and 2 AAA batteries in the base
The devices should pair automatically within a few minutes
Ensure that the distance does not exceed 100 meters in open field
Remove metallic obstacles, thick walls, and electrical devices between the sensor and the station

If not connected

Position the sensor outside, protected from direct rain
Press the TX button on the sensor to force resynchronization
Keep the sensor away from any metallic structure that blocks the radio signal (433 MHz)

The WS 1602 supports 1 wireless sensor only. If the problem persists after these steps, check that the batteries are in good condition and that the distance is less than 100 m.

Question 3

How to change the display language from German to French?

Accepted Answer

To change the display language from German to French on your ADE CK 1702 alarm clock radio, you need to access the language setting menu.

Procedure:

Press the SET button to enter setting mode
Use the UP and DOWN buttons to navigate to the language setting
Once in the language menu, select Français using the UP and DOWN buttons
Press SET to confirm and save your choice

The device offers several languages for displaying the days of the week (French, German, English, etc.). Once the French language is selected and confirmed, the day will now be displayed in French on your alarm clock radio screen.

Question 4

How to change the display language of the ADE CK 2113 clock?

Accepted Answer

On the ADE CK 2113 clock, the display language is set during the manual adjustment of the time and date. Important: this setting only affects the display of the day of the week (Monday, Tuesday, Wednesday, etc.) and not the entire clock interface.

Procedure to change the day of the week language:

Press and hold the SET button (button 17) until the display shows "BEEP ON"
Use the + or - buttons (button 15) to choose whether a beep should sound with each press ("ON" for yes, "OFF" for no)
Press SET to confirm. The display will then show "00" flashing for the time zone
Continue to press SET and successively adjust the following settings using the + or - buttons: hour, minutes, year, month, day
After the day, the display will switch to the language. Use the + or - buttons to select the desired language from the 6 available languages: French, German, English, Spanish, Italian, Polish
Press SET to confirm and complete the setting process

Once the language is selected, the day of the week will be displayed in the chosen language (for example, "Mon." for Monday in English, "lun." for lundi in French). Note: if you prefer the clock to automatically receive the time and language via the DCF77 signal, this signal is transmitted from Mainflingen in Germany on the frequency 77.5 kHz and updates the time several times a night. Some manual settings may be automatically corrected during synchronization.

Question 5

How to disable DST (Daylight Saving Time) on the CK 1720?

Accepted Answer

The CK 1720 does not have a button to manually disable Daylight Saving Time (DST). The adjustment between Daylight Saving Time and Standard Time is done entirely automatically thanks to the DCF77 radio signal.

When Daylight Saving Time is active, a dot appears next to the “DST” symbol on the clock display. This dot disappears automatically when switching to Standard Time.

If you notice a one-hour discrepancy:

Check that the clock is correctly receiving the DCF77 signal (long-wave reception 77.5 kHz)
If you need to set the time manually, make sure to select the correct time zone offset in the settings

In summary: DST is managed automatically by the device. You cannot disable it, but it adjusts itself during the time changes.

Question 6

How to disable the alarm sound on the ADE WS 2132 weather station?

Accepted Answer

To disable the alarm sound on your ADE WS 2132 weather station, follow the steps below:

Press the MODE button to access alarm mode.
Use the SET button or a similar button to navigate to the alarm sound setting option.
Set the alarm sound to OFF or Disabled, depending on the available options.
Confirm your choice by pressing the SET button or equivalent again.

The alarm sound will then be disabled, preventing unwanted sound alerts.

User manual ADE : user manuals and guides in PDF

Models ADE most viewed

Browse manuals ADE by appliance type

Recent questions about devices ADE