CK 1701 - Alarm clock radio ADE - Free user manual and instructions
Find the device manual for free CK 1701 ADE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | ADE |
| Model | CK 1701 |
| Product type | Radio alarm clock |
| Dimensions (W x H x D) | Approximately 15 x 10 x 8 cm |
| Weight | Approximately 400 g |
| Power supply | 230 V ~ 50 Hz (mains adapter) + 9V backup battery (not included) |
| Display | Red LED, adjustable brightness |
| Radio | FM/AM, analog or digital tuning, station presets |
| Alarms | 2 independent alarms with snooze |
| Alarm sound | Beep or radio, adjustable volume |
| Sound graduation | Gradual beep or radio |
| Additional functions | 12/24h clock, manual time setting, night light |
| Care and cleaning | Unplug and clean with a soft dry cloth. Do not use solvents. |
| Safety | Do not expose to water or excessive heat. Use in a dry, well-ventilated place. |
| Spare parts and repairability | Backup battery (9V) commercially available. For any repairs, contact customer service. |
| General information | Keep the manual for future reference. Made in China. |
Frequently Asked Questions - CK 1701 ADE
How to set the time on the CK 1701 alarm clock?
Press the Clock (or Time Set) button for a few seconds until the hours flash. Use the + and - buttons to set the hour, then press Clock again for the minutes. Once set, wait 5 seconds to confirm.
How to set the alarm?
The device has two alarms (AL1 and AL2). To set an alarm, press the corresponding Alarm Set button until the display flashes. Set the hour and minutes with +/-, then select the mode (beep or radio) with the Mode button. Confirm by pressing Alarm Set.
Why doesn't my alarm clock keep the time after a power outage?
Make sure you have installed a 9V backup battery in the compartment (usually on the back). Without a battery, the clock resets. Replace the battery if it is worn out.
How to use the snooze function?
When the alarm sounds, press the Snooze (or Repeat) button on the top. The alarm stops and rings again after about 9 minutes. You can repeat this operation several times.
How to tune a radio station?
Switch to radio mode by pressing Radio. Use the tuning knob to find a station. To store a station, press and hold a preset button (number 1 to 5). To recall, briefly press that same button.
The radio volume is too low, how to increase it?
Turn the volume knob (usually on the side) clockwise. If the volume remains low, check that radio mode is selected and the antenna is properly extended.
How to completely deactivate an alarm?
To deactivate an alarm, press the corresponding Alarm Set button until the display shows 'OFF' or the alarm icon disappears. You can also press Alarm On/Off to toggle.
The display is too bright at night, can I dim it?
Yes, the device has a brightness setting. Press the Dim or Light button to cycle through brightness levels (high, medium, low, off). Choose the setting that suits you.
How to replace the backup battery?
Unplug the device and open the battery compartment (usually located under the device or on the back). Remove the old battery and insert a new 9V battery (type 6LR61) respecting the polarities (+/-). Close the compartment.
My alarm clock no longer turns on, what to do?
First check that the mains adapter is properly plugged in and the socket works. If the device remains off, try removing the backup battery and reconnecting. If the problem persists, contact ADE customer service.
User questions about CK 1701 ADE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Alarm clock radio in PDF format for free! Find your manual CK 1701 - ADE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CK 1701 by ADE.