WS 2302 - Weather Station ADE - Free user manual and instructions
Find the device manual for free WS 2302 ADE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | ADE |
| Model | WS 2302 |
| Product Type | Wireless Weather Station |
| Dimensions (outdoor unit) | approx. 150 x 100 x 200 mm |
| Weight (outdoor unit) | approx. 500 g |
| Power Supply | 2 AA batteries (not included) or 5V AC adapter (not included) |
| Display | Backlit LCD with trend indicators |
| Temperature | Range: -20°C to +60°C, accuracy ±1°C |
| Humidity | Range: 20% to 95%, accuracy ±5% |
| Atmospheric Pressure | Range: 800 to 1100 hPa, accuracy ±3 hPa |
| Weather Forecast | Icons for sunny, cloudy, rainy, stormy, snowy |
| Additional Functions | Time display, alarm, calendar, moon phase, barometric trend |
| Transmission Range | Up to 100 m in open field |
| Radio Frequency | 433 MHz |
| Maintenance and Cleaning | Clean with a soft, dry cloth. Avoid solvents. |
| Safety | Do not expose to excessive humidity. Replace batteries if leaking. |
| Spare Parts and Repairability | Outdoor sensors available as option. Repair by authorized service. |
| General Information | Indoor/outdoor use. Display in French. |
Frequently Asked Questions - WS 2302 ADE
How to install the ADE WS 2302 weather station?
Place the outdoor sensor sheltered from direct rain and sun. Insert the batteries into the indoor unit and the sensor. The two devices will pair automatically within 3 minutes.
Why does my station display incorrect values?
Check that the batteries are in good condition and that the outdoor sensor is within 30 meters of the indoor unit without major obstacles. Avoid nearby heat or moisture sources.
How to change the time manually?
Press the 'SET' button for 3 seconds to enter setting mode. Use the arrows to adjust the time, date, and alarm. Confirm with 'SET' at each step.
What to do if the display is dim?
The backlight activates briefly when any button is pressed. If the display remains dim, replace the batteries of the indoor unit.
How to interpret the weather forecast icons?
The icons indicate a general trend: sun for fine weather, cloud for overcast, rain for showers, etc. Accuracy is best over 12 to 24 hours.
Can I connect multiple sensors?
The WS 2302 model supports only one outdoor sensor. For multiple areas, you can purchase additional stations.
How to reset the station?
Remove the batteries from the indoor unit and sensor for 10 seconds, then reinsert them in the following order: first the sensor, then the indoor unit.
Is the range sufficient for a house?
The stated range is 100 m in open field. In a house, walls reduce the range to about 30-50 meters. Try to place the sensor in a nearby room.
What type of batteries to use?
Use good quality AA alkaline batteries. Avoid rechargeable batteries as their voltage is lower and may reduce performance.
How to clean the outdoor sensor?
Clean it with a non-lint damp cloth. Make sure the ventilation openings are not obstructed. Do not use chemicals.
User questions about WS 2302 ADE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Weather Station in PDF format for free! Find your manual WS 2302 - ADE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WS 2302 by ADE.
USER MANUAL WS 2302 ADE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ADE
Model : WS 2302
Category : Weather Station