Ines BA2300-2 - Scale ADE - Free user manual and instructions
Find the device manual for free Ines BA2300-2 ADE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Bathroom scale |
| Brand | ADE |
| Model | Ines BA2300-2 |
| Dimensions (approx.) | 30 × 30 × 2 cm |
| Maximum weight | 180 kg |
| Accuracy | 0.1 kg |
| Power supply | 1 CR2032 button cell battery (included) |
| Display | Digital LCD screen |
| Units of measurement | kg, lb, st |
| Main functions | Weight measurement, overload indicator, auto shut-off, auto zero reset |
| Platform material | Tempered safety glass |
| Color | White / Transparent |
| Scale weight | Approximately 1.2 kg |
| Care and cleaning | Clean with a damp cloth, avoid abrasive products |
| Safety | Non-slip surface, auto shut-off after inactivity |
| Spare parts and repairability | Standard replaceable batteries, no specific spare parts provided |
| Warranty | 2 years (depending on retailer) |
Frequently Asked Questions - Ines BA2300-2 ADE
How do I change the battery on the ADE Ines BA2300-2 scale?
Turn the scale over, open the battery compartment located under the device using a screwdriver or a coin. Replace the used battery with a new CR2032 battery, respecting polarity. Close the cover.
What should I do if the screen displays 'Err' or 'O-Ld'?
These messages indicate overload or measurement error. Check that the weight does not exceed 180 kg. If the error persists, remove the battery for 10 seconds and then reinsert it.
How do I switch from kg to pounds (lb) or stones (st)?
Press the button located under the scale or on the side to toggle between units: kg, lb, st. The selected unit will be displayed on the screen.
The scale does not turn on, what should I do?
Check that the battery is correctly installed and not discharged. If necessary, replace it with a new CR2032 battery. Make sure the scale surface is clean and the contacts are dry.
What is the accuracy of the scale?
The ADE Ines BA2300-2 scale has an accuracy of 0.1 kg (100 g). For reliable measurement, place it on a hard, flat floor.
How do I clean the scale?
Use a slightly damp soft cloth to clean the glass surface. Avoid chemical products, abrasives, or immersion in water. Do not rinse the scale under running water.
The scale turns off too quickly, is this normal?
Yes, the auto shut-off function turns off the power after about 10 seconds of inactivity to save battery. Step onto the scale quickly after turning it on.
Can I use the scale on a carpet?
It is recommended to place the scale on a hard, flat surface (tile, hardwood floor) to ensure accurate measurement. Carpet may distort results.
What should I do if the scale displays an unstable weight?
Make sure to stay still during measurement. Check that the scale is placed flat and the anti-slip feet are clean. If the problem persists, change the battery.
How can I get a user manual in English?
The manual is available for free download on the website notice-facile.com in PDF format. You can also request a translation by email via the product page.
User questions about Ines BA2300-2 ADE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Scale in PDF format for free! Find your manual Ines BA2300-2 - ADE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Ines BA2300-2 by ADE.
USER MANUAL Ines BA2300-2 ADE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ADE
Model : Ines BA2300-2
Category : Scale