PU012 - Carte électronique SWEEX - Notice d'utilisation et mode d'emploi gratuit

Type d'appareil	Carte d'extension PCI Express
Nombre de ports	2 ports série
Interface	PCI Express
Installation	Interne, dans un slot PCIe
Compatibilité	Ordinateur de bureau
Protection contre les chocs	Recommandée
Conditions d'utilisation	Éviter températures extrêmes et environnements poussiéreux
Montage	Fixation avec vis
Alimentation	Alimentation via le slot PCIe
Matériau	Non précisé
Dimensions	Standard PCIe
Utilisation recommandée	Extension de ports série
Précautions	Éviter contact avec points de connexion exposés
Installation requise	Déconnecter alimentation avant installation
Manuel d'installation	Inclus

FOIRE AUX QUESTIONS - PU012 SWEEX

Comment connecter le SWEEX PU012 à mon ordinateur ?

Pour connecter le SWEEX PU012 à votre ordinateur, utilisez le câble USB fourni. Branchez une extrémité du câble dans le port USB du SWEEX PU012 et l'autre extrémité dans un port USB disponible de votre ordinateur.

Le SWEEX PU012 est-il compatible avec mon système d'exploitation ?

Le SWEEX PU012 est généralement compatible avec les systèmes d'exploitation Windows, macOS et Linux. Veuillez vérifier les spécifications de votre système pour vous assurer de la compatibilité.

Que faire si le SWEEX PU012 ne s'allume pas ?

Assurez-vous que le câble USB est correctement connecté. Essayez de le brancher sur un autre port USB. Si le problème persiste, vérifiez si le dispositif fonctionne sur un autre ordinateur.

Comment installer les pilotes pour le SWEEX PU012 ?

Pour la plupart des systèmes, aucun pilote supplémentaire n'est requis, car le SWEEX PU012 est plug-and-play. Si nécessaire, consultez le site Web de SWEEX pour télécharger les pilotes appropriés.

Puis-je utiliser le SWEEX PU012 avec des appareils mobiles ?

Le SWEEX PU012 est principalement conçu pour être utilisé avec des ordinateurs. Pour les appareils mobiles, vérifiez la compatibilité et l'utilisation d'adaptateurs si nécessaire.

Comment résoudre les problèmes de connexion avec le SWEEX PU012 ?

Vérifiez que le câble USB est intact et bien connecté. Essayez de redémarrer votre ordinateur et de reconnecter le dispositif. Si le problème persiste, testez le SWEEX PU012 sur un autre ordinateur.

Le SWEEX PU012 est-il sous garantie ?

Oui, le SWEEX PU012 est généralement couvert par une garantie limitée. Consultez le manuel de l'utilisateur ou le site Web de SWEEX pour plus d'informations sur la garantie.

Comment nettoyer mon SWEEX PU012 ?

Pour nettoyer le SWEEX PU012, utilisez un chiffon doux et sec. Évitez les produits chimiques agressifs et l'exposition à l'eau.

MODE D'EMPLOI PU012 SWEEX

PU012 Sween 2 Port Serial PCI Express Card

Introduction

• Do not expose the PU012 to extreme temperatures. Do not place the device in direct sun light or close to heating elements.
• Do not use the PU012 in extremely dusty or moist environments.
• Prevent hard shocks or impacts of the device, as this can cause damage to the internal electronics.

Hardware Installation

1. Make sure the computer is turned off and that there is no power connected.
2. Also remove the printer and monitor cable, because these have their own power supply.
3. Now unscrew the computer casing.
4. Make sure that you undo yourself of possible static electricity. This can be done by grabbing a (naked) central heating pipe or an unpainted water pipe. Pay attention not to use a magnetic screwdriver. Briefly touch the iron frame of the PC casing. Avoid direct contact with the contact points of the PCIe slot and contact points on the graphics card.
5. Locate a free PCIe slot and remove the metal protection plate that is in the computer casing for the intended slot. Consult the manual of your computer to find the PCIe slot.
6. When possible fasten the card with screws so it can not move.
7. When the card is mounted successfully, check if the other cards are still fitted properly in their expansion slot. It can happen that when a new card is added the other cards rise a little with as result that the card, or even the entire computer, may not work.
8. Close the computer casing and reconnect all cables properly.
9. Turn on the computer.

Installation Windows XP

After starting the computer this window will appear.

Found New Hardware Wizard

Welcome to the Found New Hardware Wizard

Windows will search for current and updated software by clicking on the "Update" button in the Windows Update menu on the Windows Update site (with your permission).

Can Windows connect to Windows Update to search for software?

Yes, this time only.

Yes, now and gey line I connect a device

No,not this time

Click Next to continue.

Choose "No not this time" and click "Next".

Found New Hardware Wizard

This wizard helps you install software for:

SweeX 2 Port Serial PCIe Card

If your hardware came with an installation CD

or floppy disk, insert it now.

What do you want the wizard to do?

Iolal the software automatislics Recomended

Install from a list or specific location [Advanced]

Click Next to continue.

Place the Sweeex CD-ROM in the CD-ROM player. When the CD-ROM already was in the player, open the tray and close it again. Windows will automatically install the drivers.

If windows can not find the drivers, choose "Install from a list or specific location" in the above window.

Found New Hardware Wizard

Please choose your search and installation options.

Search for the best driver in these locations.

Use the check boxes below to limit or expand the default search, which includes local paths and removable media. The best driver found will be installed.

Search removable media [fppy, CD-ROM]

Include this location in the search.

CD-ROM DriveA

Don't search. I will choose the driver to install

Choose this option to select the device driver from a list. Windows does not guarantee that the driver you choose will be the best match for your hardware.

Click "Browse" and navigate to the Sweex CD-ROM to find the drivers. Press "Next".

It is possible that Windows will notify you that the driver is not certified. This is not a problem for correct functioning of the card. All Swee x products and relevant drivers are tested thoroughly. Choose the option "Continue Anyway".

Press "Finish" to complete the installation.

It is possible that the first window will re-appear. If it does repeat this procedure.

Installation Windows Vista

After starting the computer this window will appear.

Click "Locate and install driver software".

Place the Sweex CD-ROM in the CD-ROM player. When the CD-ROM already was in the player, open the tray and close it again. Windows will automatically install the drivers.

When windows can not find the drivers, choose "I don't have a disc. Show me other options." in the above window.

Click "Browse my computer for driver software".

Navigate to the Sweex CD-ROM to find the drivers.

It is possible that Windows will notify you that the driver is not certified. This is not a problem for correct functioning of the card. All Sweex products and relevant drivers are tested thoroughly. Choose the option "Install this driver software anyway".

Follow the steps to complete the installation. It is possible that the first window will re-appear. If it does repeat this procedure.

Port settings Serial

The settings of the COM ports can be viewed and adjusted as follows:

Go to START -> settings -> control panel

In this window open "System". Go to the tab "Hardware" > "device manager".

In the device manager open the "Ports (COM & LPT)" list and select: NetMos PCIe Serial Port (COM)

Open the settings by right clicking it.

The following screen appears:

Select the tab "Port settings" and click "Advanced...".

Here you can view or change your COM port. Be aware that you do not choose a port that is already being used by the computer. This can result in a conflict.

Warranty

For most Sweeox products a warranty period of 3 years applies. On Graphics Cards and Consumer Electronics Sweeox offers 2 years of warranty. We do not give support or warranty on supplied software, rechargeable batteries and batteries. Transaction of warranty only takes place at the sales point where the product is bought.

All brand names and associated rights mentioned in this manual are and stay property of the rightful owner.