LC086_PACK - Adaptateur réseau SWEEX - Notice d'utilisation et mode d'emploi gratuit

Type d'appareil	Adaptateur réseau Powerline Ethernet
Vitesse de transmission	Jusqu'à 85 Mbps
Connexion	Ethernet
Installation	Plug and play, prise secteur
Compatibilité	Réseau électrique domestique
Protection contre surtensions	Non recommandé de connecter à une prise avec protection
Température d'utilisation	Éviter températures extrêmes
Environnement d'utilisation	Éviter poussière et humidité
Montage	Prise murale
Nombre de connexions	1 port Ethernet
Garantie	Annulée en cas d'ouverture du produit
Installation recommandée	Une prise libre par adaptateur
Protection interne	Non précisé
Chocs et impacts	À éviter pour ne pas endommager l'appareil
Utilisation avec onduleur	Non recommandé

FOIRE AUX QUESTIONS - LC086_PACK SWEEX

Comment installer le SWEEX LC086_PACK sur mon ordinateur ?

Pour installer le SWEEX LC086_PACK, branchez le périphérique sur un port USB disponible de votre ordinateur. Le système devrait automatiquement détecter le matériel et installer les pilotes nécessaires. Si ce n'est pas le cas, veuillez visiter le site Web de SWEEX pour télécharger les pilotes.

Le SWEEX LC086_PACK ne fonctionne pas, que faire ?

Vérifiez que le périphérique est correctement branché et que le port USB fonctionne. Essayez de le brancher sur un autre port USB ou un autre ordinateur. Si le problème persiste, réinstallez les pilotes depuis le site officiel de SWEEX.

Comment mettre à jour les pilotes du SWEEX LC086_PACK ?

Rendez-vous sur le site Web de SWEEX, recherchez votre modèle LC086_PACK et téléchargez les pilotes les plus récents. Suivez les instructions d'installation fournies pour mettre à jour vos pilotes.

Le SWEEX LC086_PACK est-il compatible avec mon système d'exploitation ?

Le SWEEX LC086_PACK est généralement compatible avec les systèmes d'exploitation Windows et macOS. Veuillez vérifier les spécifications du produit sur le site de SWEEX pour confirmer la compatibilité avec votre version spécifique.

Comment résoudre les problèmes de connexion avec le SWEEX LC086_PACK ?

Assurez-vous que le périphérique est bien branché et que le port USB est fonctionnel. Vérifiez également les paramètres de votre ordinateur pour vous assurer que le périphérique est activé. Si le problème persiste, essayez de redémarrer votre ordinateur.

Que faire si le son est de mauvaise qualité avec le SWEEX LC086_PACK ?

Vérifiez les réglages audio de votre ordinateur et assurez-vous que le volume est correctement réglé. Testez avec d'autres écouteurs ou haut-parleurs pour voir si le problème persiste. Si nécessaire, réinstallez les pilotes audio.

MODE D'EMPLOI LC086_PACK SWEEX

Black electronic device labeled 'VACD' with control buttons and a small antenna (no readable text or symbols beyond branding)

LC086 Sweex Powerline Ethernet Adapter 85 Mbps

Introduction

• Do not expose the Sweex Powerline Ethernet Adapter 85 Mbps to extreme temperatures. Do not place the product in direct sun light or close to heating elements.
• Do not use the Sweex Powerline Ethernet Adapter 85 Mbps in extremely dusty or moist environments.
• Prevent hard shocks or impacts of the product, as this can cause damage to the internal electronics.
• Never try to open the product yourself, this voids the warranty.

Important!

Do not connect the Sweex Powerline Ethernet Adapter 85 Mbps to a UPS or a socket with surge protection and/or filter. This can negatively influence the quality of the signal.

Hardware Installation

Prior to installing the hardware, follow these precautionary instructions:

• Ensure that there is at least 1 free plug socket available for every adapter.
• Place the adapter in the plug socket.
• Place the second and possibly third (etc.) adapter in a different plug socket.
• Connect the adapter with the network and/or the computer by means of the network cables. There are 3 connection possibilities:

1: From /switch to PC (see image underneath)

graph TD
    A["Internet"] --> B["ADS_L"]
    B --> C["ADSL Router"]
    C --> D["RJ45"]
    D --> E["PC"]
    E --> F["Access"]
    style A fill:#f9f,stroke:#333
    style E fill:#ccf,stroke:#333

2: From PC to PC
3: From router/switch to router/switch

- Check if the LEDs are lit as indicated in the topic "LED indications".

Software installation XP and Vista

No drivers are needed for the Sweex Powerline Ethernet Adapter. The utility that will be installed ensures extra functionality and security. If you do not need this you do not have to install the software. Without software you can immediately use the Sweex Powerline Ethernet Adapter.

Before you start the installation we recommend you to ensure that your operating system is up-to-date. This is easily checked by selecting the "Extra" menu in Internet Explorer and then the option "Windows Update".

Place the Sweex CD-ROM in the CD-ROM player. The auto run menu will start automatically.

In this menu choose "Software XP and Vista"

When this auto run menu does not appear you can start the software manually. To do this open "My Computer" and go to X:\software\ (X is the letter of the CD-ROM drive). Here is the file 'LC086_software'. Execute this file. Windows will install the software automatically.

Software Power Adapter Utility

Configuring the Sweex Powerline Ethernet Adapter 85 Mbps is done with the 'PowerPacket Utility'. These can be found as follows:

Go to START -> "All Programs" -> "Power Adapter" -> "Power Adapter Utility"

or when the classic view is being used:

Go to START -> "Programs" -> "Power Adapter" -> "Power Adapter Utility"

The following screen appears:

Source: PowerPacket Utility Main | Privacy | Diagnostics | About Local Device or your computer Generic Type 1 Network Address Connected to NetworkPage Turbo Device PowerPage Turbo Drive 80.7527.20.36.36 Connect F Provider Device detected Network Type: Private Scanout: Service Name | Payment | Quality | Rate (path) | MAC Address Transaction 1 32.98 80.7527.20.36.37 OK/OK Remove Close Cancel

The program will immediately search for the Powerline devices, which are connected with the powerline adapter of your computer via the power grid. The found devices will appear in the window under "Device Name". Here you can see the password (Default setting empty), the quality of the connection, the effective data speed ("Rate (Mbps)") and the MAC address of the adapter.

When you want to use the security possibilities you have to enter the password of the adapter. This password ("PWR: xxxx-xxxx-xxxx-xxxx") is unique for every adapter and is located on the sticker underneath the adapter under the MAC address ("MAC: xxxxx: xxxxx: xxxxx"). We advise you to write these details on a piece of paper before you start the installation, this way you can easily find the details.

Select the device you want to configure and click "Enter Password". The following screen appears:

Set Device Password Device: Device 1 (00:73:07:31:BA:37) Password: The Password typically appears as a number and letter code, in groups of four, separated by dashes. (In X/OY-0GH26-BR1K-LZSA) It is found on the device or packaging. OK Cancel

Enter the password that is on the adapter. Pay attention that the MAC address of the adapter is the same as the MAC address in the program, so that the right password is entered!

Security

It is not necessary to configure the security for the Sweex Powerline Ethernet Adapter 85 Mbps to work properly. If someone has access to your plug sockets, that person (when you did not setup security) could access internet via that plug socket. This is not practical and will hardly ever occur, because the Powerline is limited to your own house. Powerline does go over all groups within your house.

Source Power/Packet Utility Main: Provider [ Diagnostics] About Use this screen to create a Private Network that provides you with extra security. PrivateNetwork Name: Name: OR: Use Default (Public Network) Do not mean the network name with others you do not want to be part of this network. After setting the name above, choose how it will be applied below: Place On This Network Only the device attached to this computer (the Local Device) Estimates the computer home (other) Set Local Device Only OR All devices where Password has been entered. (They communicate together but are installed from devices with a different network name) Set All Devices Close Cancel

Applying the security is done in the second tab. Here you can give a unique network name (default is "HomePlug"). This network name is also the password to connect to the Powerline network. After entering a network name you have to click on "Set All Devices". This will only work when the "Password" of all adapters is entered. The network is now secured and can be connected to by all adapters that have the unique network name.

When the passwords of the adapters are not entered, only the locally connected adapter can be configured. This adapter will then be isolated from the network, because only this adapter has a unique network name.

Only adapters with the same network name can create a network together. The default network name is "HomePlug". When you do not need security you do not have to configure anything.

LED indications

The Sweex Powerline Ethernet Adapter 85 Mbps has 3 LEDs:

LED Indicator	Status	Indication
Data	On	An other adapter is detected on the same network.
	Off	No other adapter is detected in the same network.
	Blinking	There is activity on the Powerline network.
Power	On	The adapter is turned on.
Ethernet	On	The network port is correctly connected and ready to send/receive data.
	Off	The network port is not connected correctly.
	Blinking	The network port sends/receives data.

Warranty

For all Sweex products a warranty period of 3 years applies. We do not give support or warranty on supplied software, rechargeable batteries and batteries. Transaction of warranty only takes place at the sales point where the product is bought.

All brand names and associated rights mentioned in this manual are and stay property of the rightful owner.