Q: The keyboard has no light when I plug it in - what should I do?

If your MSI FORGE GK600 TKL WIRELESS shows no light when plugged in, here are the checks to perform: 1. Check the battery status This keyboard operates on a rechargeable battery with a lifespan of up to 200 hours. If the battery is completely drained, no LED will light up upon initial connection. Leave the keyboard to charge for at least 30-45 minutes with the provided USB-C cable before testing again. 2. Observe the charging indicator During charging, a charging LED should light up to confirm that the keyboard is receiving power. If no charging LED appears: Try another USB-C cable (the provided cable may be defective) Test another USB port on your computer Attempt to charge via a standard USB wall adapter (5V) 3. Reset the keyboard A reset may restore LED detection. Refer to the user manual to locate the reset button or hole (usually located at the back of the keyboard). 4. Connection mode Remember that this keyboard supports two modes: wireless (Bluetooth/USB dongle) and wired (USB-C) . If you plug it in via USB-C, the backlighting may be disabled according to your settings in the MSI Center software - check that the LEDs are not simply turned off in the settings. 5. As a last resort If no charging LED appears even after 1-2 hours of charging on multiple ports, the battery or power circuit may be defective. Contact MSI support with your proof of purchase.

Q: How to change the keyboard backlight color?

To change the backlight color of the MSI FORGE GK320, use the following key combinations: FN + INS - changes the color of the side light bar (cycles through available colors) FN + DEL - toggles between different lighting effects FN + PRTSC - activates/deactivates the light wheel effect FN + HOME - increases the effect speed FN + END - decreases the effect speed You can also use the 5 predefined gaming modes (FN + 1 to FN + 5), each with dedicated lighting for popular game genres. For advanced RGB customization beyond keyboard controls, download and install MSI Dragon Center from the official MSI website, then go to the 'Keyboard' tab to modify the lighting settings in detail. You can also adjust the overall brightness with FN + PGUP (increase) and FN + PGDN (decrease).

Question 1

What is the FN key for on the MSI FORGE GK320 keyboard?

Accepted Answer

The FN key is a function key that allows access to advanced commands and shortcuts on the MSI FORGE GK320 keyboard. It works in combination with other keys.

Main commands with FN:

FN + X : Toggles the backlight on or off
FN + DEL : Changes the lighting effects
FN + INS : Modifies the color of the sidebar
FN + PGUP/PGDN : Adjusts the brightness
FN + HOME/END : Controls the speed of effects
FN + F1 to F12 : Accesses multimedia functions (volume, email, calculator, etc.)
FN + WIN-L : Locks the Windows key
FN + PAUSE : Starts macro recording (up to 10 actions per F1-F5 key)

The FN key is essential for fully utilizing the programming and customization capabilities of the keyboard's backlighting.

Question 2

How to redirect the multimedia music key to open Spotify instead of VLC?

Accepted Answer

The MSI FORGE GK320 keyboard allows you to redirect certain multimedia functions via macro keys F1-F5. Here’s how to do it:

Solution 1: Use a macro key to launch Spotify

Press FN + PAUSE to enter macro recording mode
Select a macro key (F1 to F5) and record up to 10 actions to launch Spotify
Confirm the recording by pressing FN + PAUSE again
From then on, the corresponding F key will launch Spotify

Solution 2: Reconfigure via the operating system

The standard multimedia keys (like the music one) are usually managed by your operating system rather than the keyboard. On Windows, you can:

Go to Settings > Devices > Keyboard and look for key remapping options
Use third-party software like AutoHotkey to redirect the multimedia key to your application of choice

Note: The FORGE GK320 manual does not specify whether the FN+F1-F12 multimedia keys can be remapped directly. For more technical details, contact MSI support.

Question 3

The keyboard has no light when I plug it in - what should I do?

Accepted Answer

If your MSI FORGE GK600 TKL WIRELESS shows no light when plugged in, here are the checks to perform:

1. Check the battery status

This keyboard operates on a rechargeable battery with a lifespan of up to 200 hours. If the battery is completely drained, no LED will light up upon initial connection. Leave the keyboard to charge for at least 30-45 minutes with the provided USB-C cable before testing again.

2. Observe the charging indicator

During charging, a charging LED should light up to confirm that the keyboard is receiving power. If no charging LED appears:

Try another USB-C cable (the provided cable may be defective)
Test another USB port on your computer
Attempt to charge via a standard USB wall adapter (5V)

3. Reset the keyboard

A reset may restore LED detection. Refer to the user manual to locate the reset button or hole (usually located at the back of the keyboard).

4. Connection mode

Remember that this keyboard supports two modes: wireless (Bluetooth/USB dongle) and wired (USB-C). If you plug it in via USB-C, the backlighting may be disabled according to your settings in the MSI Center software - check that the LEDs are not simply turned off in the settings.

5. As a last resort

If no charging LED appears even after 1-2 hours of charging on multiple ports, the battery or power circuit may be defective. Contact MSI support with your proof of purchase.

Question 4

Where is the FN key on the MSI FORGE GK320 keyboard?

Accepted Answer

The MSI FORGE GK320 manual does not provide a precise diagram indicating the exact position of the FN key. However, on this gaming keyboard, the FN is a dedicated modifier that works in combination with other keys to access advanced features.

On most gaming keyboards of this type, the FN key is generally located at the bottom left of the keyboard, near the CTRL key. It is often clearly labeled "FN".

Use of FN on the FORGE GK320

Once located, you can use it to:

Control the lighting - FN + X (backlight), FN + DEL (effects), FN + PGUP/PGDN (intensity), FN + INS (colors)
Record macros - FN + PAUSE to program keys F1 to F5
Access multimedia functions - FN + F1 to F12 (volume, play, email, calculator)
Lock the Windows key - FN + WIN-L during gaming
Adjust effects - FN + HOME/END to change the speed of animations

If you do not see a key clearly labeled "FN", check the physical keyboard in detail or contact MSI support for precise model confirmation.

Question 5

How to change the keyboard backlight color?

Accepted Answer

To change the backlight color of the MSI FORGE GK320, use the following key combinations:

FN + INS - changes the color of the side light bar (cycles through available colors)
FN + DEL - toggles between different lighting effects
FN + PRTSC - activates/deactivates the light wheel effect
FN + HOME - increases the effect speed
FN + END - decreases the effect speed

You can also use the 5 predefined gaming modes (FN + 1 to FN + 5), each with dedicated lighting for popular game genres.

For advanced RGB customization beyond keyboard controls, download and install MSI Dragon Center from the official MSI website, then go to the 'Keyboard' tab to modify the lighting settings in detail.

You can also adjust the overall brightness with FN + PGUP (increase) and FN + PGDN (decrease).

Question 6

How to turn on the illumination of all keys?

Accepted Answer

To turn on the illumination of all keys on the MSI FORGE GK320, press FN + X. This combination toggles the full keyboard backlight on or off.

You can also choose from 5 predefined illumination modes that target different groups of keys:

FN + 1 - Illuminates the WASD keys and arrow keys
FN + 2 - Lights up common gaming keys (ESC, number row, QWERT cluster)
FN + 3 - Illuminates strategic keys (ESC, QWERT, PVBD, CTRL, Space)
FN + 4 - Default mode highlighting movement keys
FN + 5 - Default mode highlighting movement keys

You can also adjust the backlight:

FN + DEL - Cycles through different illumination effects
FN + PGUP - Increases brightness
FN + PGDN - Decreases brightness
FN + HOME - Increases effect speed
FN + END - Decreases effect speed

For more advanced and complete RGB customization, download and install MSI Dragon Center from the official MSI website, then access the keyboard settings tab for detailed illumination options.

User manual MSI Keyboard : user manuals and guides in PDF

Models MSI Keyboard most viewed

Other categories MSI

Recent questions about Keyboard MSI