What does the error code E6 displayed at the startup of the wine cellar mean?

Q: What does the error code E6 displayed at the startup of the wine cellar mean?

The error code E6 indicates a communication error from the control system of the wine cellar. What to do immediately: Unplug the device from the electrical outlet Wait a few minutes (at least 5 minutes) Plug the device back in This action resets the system and usually resolves the issue. Remember that you must wait for a 30-minute rest period after initial startup, and a minimum of 5 minutes after each power outage before plugging it back in. If the E6 code reappears after this procedure, it may also indicate a fault with the temperature sensor or the ambient temperature sensor. In this case, contact customer service at 09 78 97 97 97 for diagnosis or intervention.

Question

Accepted Answer

The error code E6 indicates a communication error from the control system of the wine cellar.

What to do immediately:

Unplug the device from the electrical outlet
Wait a few minutes (at least 5 minutes)
Plug the device back in

This action resets the system and usually resolves the issue. Remember that you must wait for a 30-minute rest period after initial startup, and a minimum of 5 minutes after each power outage before plugging it back in.

If the E6 code reappears after this procedure, it may also indicate a fault with the temperature sensor or the ambient temperature sensor. In this case, contact customer service at 09 78 97 97 97 for diagnosis or intervention.

User manual SIGNATURE Wine cellar : user manuals and guides in PDF

Models SIGNATURE Wine cellar most viewed

Other categories SIGNATURE

Recent questions about Wine cellar SIGNATURE