How to connect the Koenic KAC 14022 WLAN air conditioner to the mobile app?

Question

Accepted Answer

Activating the WiFi function on your Koenic KAC 14022 WLAN:

To connect your air conditioner to a mobile app, you must first activate the WiFi function on the device. The factory default setting is disabled. Here are the steps to follow:

Step 1 - Activating WiFi mode: On the control panel of the air conditioner, press and hold the + and – buttons simultaneously for about 5 seconds until the WiFi symbol starts to blink. This blinking indicates that pairing mode is activated and the air conditioner is ready to connect.
Step 2 - Connecting via your phone: Once WiFi is activated (blinking symbol), go to the WiFi settings on your phone or mobile device and connect to the WiFi network created by the Koenic air conditioner.
Step 3 - Checking the connection: When your phone is paired with the air conditioner, the WiFi symbol will be displayed continuously (without blinking) on the control panel screen of the air conditioner. This confirms that the connection is established and stable.
Disabling WiFi: To disable the WiFi function later, press and hold the + and – buttons for about 5 seconds. The WiFi symbol will disappear from the panel screen.

Using the Koenic mobile app: Once the WiFi connection is established, detailed instructions for installing and using the Koenic mobile app (app setup, remote controls, programming, etc.) are provided in a separate manual dedicated to WLAN/IoT functions. This document should be included in the documentation delivered with your air conditioner.

If you cannot find this manual, visit www.koenic-online.com or contact Koenic technical support to download the complete user guide for the mobile app related to the KAC 14022 WLAN.

User manual Koenic Air Conditioning : user manuals and guides in PDF

Models Koenic Air Conditioning most viewed

Other categories Koenic

Recent questions about Air Conditioning Koenic