User manual NEDIS Air conditioner : 3 free PDF user manuals

Q: How to drain and remove water from the NEDIS WIFIACMB1WT7 air conditioner?

The NEDIS WIFIACMB1WT7 air conditioner produces approximately 17 liters of humidity per day. Two draining methods are possible: Manual Drainage Use the manual drainage outlet (A⑬) to manually empty the water accumulated in the tank. This is the simplest solution for occasional use or in low-humidity environments. Continuous Drainage For automatic drainage, connect the continuous drainage outlet (A⑪) to a water tank or drainage system (not provided with the device). This method is recommended for prolonged operation or in very humid areas where 17 liters per day accumulate quickly. Choose the method suitable for your usage and environment.

Q: How to configure and set the parameters of the NEDIS WIFIACMB1WT7 air conditioner?

The NEDIS WIFIACMB1WT7 air conditioner offers three control modes: Front panel - Buttons directly on the device Included remote control - Wireless control Nedis SmartLife app - Control via 2.4 GHz Wi-Fi Main settings via buttons The front panel has 10 control elements: Power button - Turns the device on/off (B6) Mode button (B7) - Selects between three modes: Cooling (7000 BTU) Dehumidification (up to 17 L/day) Ventilation Fan speed button (B8) - Adjusts the power Timer button (B2) - Sets the operating duration Up/down buttons (B3 and B4) - Increase or decrease the temperature Sleep mode A special sleep mode gradually increases the set temperature (+1°C every hour) for more nighttime comfort. Wi-Fi configuration To use the Nedis SmartLife app: Download the app on your phone Create a user account Press “+” to add the device Ensure the Wi-Fi indicator is blinking quickly Connect to a 2.4 GHz only network (5 GHz is not compatible) To reset the Wi-Fi connection, press and hold the B8 button for 5 seconds in sleep mode until a sound tone is heard.

Q: How to reset the WiFi connection of my NEDIS WIFIACMB1WT7 air conditioner?

To reset the WiFi connection of your NEDIS WIFIACMB1WT7 air conditioner, follow this precise procedure: Put your device in standby mode Press and hold the fan speed button (B8) for 5 full seconds - do not release it until the time is up Listen for a beep : it confirms that the reset has been triggered Watch the WiFi indicator (B6) which should blink rapidly After the reset: Open the Nedis SmartLife app and reconnect your air conditioner. Make sure to select a 2.4 GHz WiFi network only (5 GHz networks are not compatible). If the indicator does not blink after 5 seconds, check that you are pressing the B8 button (fan speed) and not another button. A firm and continuous press for the full 5 seconds is essential.