How to manually turn on the ROINTE BELIZE II electric radiator?

Question

Accepted Answer

To turn on your ROINTE BELIZE II electric radiator, press the power button © (marked ON/OFF) located under the 1.77-inch TFT touchscreen. The device will activate immediately.

Upon first use, the radiator will prompt you to set the date and time. Use the Ÿ (down arrow) and À (up arrow) buttons to select the correct hour, then press the © button to confirm. Proceed in the same manner for the minutes, and then for the day of the week.

Once configured, your BELIZE II starts in Manual mode by default. The device displays the current temperature, and you can adjust the set temperature according to the chosen mode:

Comfort Mode: 19 to 30 °C
Eco Mode: 7.5 to 18.5 °C
Frost Protection Mode: 7 °C

Use the À button to increase the temperature by half a degree or Ÿ to decrease it. When the ambient temperature falls below the selected one, the heating symbol appears, and the heating element activates to heat the heat transfer fluid in your radiator. The high-precision digital thermostat (max deviation ± 0.25 °C) maintains the set temperature.

If the radiator is locked (lock symbol cadenas displayed), press the Ÿ and À buttons simultaneously for 3 seconds to unlock it. To turn off the device, press the © button again.

User manual ROINTE Electric heater : user manuals and guides in PDF

Models ROINTE Electric heater most viewed

Other categories ROINTE

Recent questions about Electric heater ROINTE