How do I set the time on the HOTPOINT ARISTON FQ 99 C.1 (ICE) HA microwave?

Question

Accepted Answer

To set the time on your HOTPOINT ARISTON FQ 99 C.1 (ICE) HA microwave, follow the steps below:

Turn on the microwave: Make sure the appliance is plugged in and in standby mode.
Access the time setting mode: Press the "Clock" or "Reloj" button. On some models, you may need to hold this button down for a few seconds until the display blinks.
Set the time: Use the "+" or "-" buttons to adjust the time. If your model displays time in 12-hour format, ensure that the AM/PM indication is correct.
Confirm the time: Press the "Clock" or "Reloj" button again to confirm the set time.
Set the minutes: If necessary, repeat the same process to adjust the minutes.
Finalize the setup: Once the hours and minutes are correctly set, the display should stop blinking and your microwave will show the current time.

This procedure will ensure that the correct time is displayed on your microwave, making it easier to use the programmed functions.

User manual HOTPOINT-ARISTON Microwave Oven : user manuals and guides in PDF