Why does my HOTPOINT-ARISTON MWHA 122.1 X microwave heat very little, for example, a glass of water only becomes hot after 1.5 minutes?

Question

Accepted Answer

The HOTPOINT-ARISTON MWHA 122.1 X has a microwave power of 800W, which is quite normal for this model. A glass of water (approximately 250 ml) that only becomes hot after 1.5 minutes is therefore not necessarily abnormal at this power. However, if you find the heating time excessive compared to your expectations, several points deserve verification.

First, check the power setting. Your microwave offers several power levels: 800W (maximum power for this model), 700W, 600W, 500W, etc. To quickly heat a liquid or a glass of water, you must use the maximum power (800W). If you have inadvertently selected a lower power (400W or 500W for example), this explains the longer heating time. Refer to the manual to check how to access the power selection.

Next, make sure the door closes properly. A poorly closed door will prevent the microwave from operating at full power or trigger the automatic shutdown of the device. Close the door securely and check that it clicks into place. Also inspect the sealing gasket around the door: if it is damaged, cracked, or misaligned, it needs to be replaced, as a faulty gasket significantly reduces heating efficiency.

Also check the power supply of your device. Ensure that the microwave is plugged directly into a functional outlet (and not into a faulty power strip). Check the condition of the power cord: if it is damaged, twisted, or worn, the current may be reduced, impacting the heating power. Insufficient electrical voltage due to poor installation can also affect performance.

If the turntable is not rotating, this can also influence heat distribution. Check that the turntable rotates correctly in both directions during operation. The turntable must be properly positioned on its support, and the rollers must be aligned. If the turntable is stuck or not turning, heating will be uneven and slower.

If after these checks the problem persists, especially if you are sure the power is set to 800W and the door closes properly, it is likely that an internal malfunction is the cause (faulty magnetron, worn transformer, or another affected component). In this case, you will need to call a specialized HOTPOINT-ARISTON technician for diagnosis and repair.

For your information, with 800W and a glass of water of 250 ml at room temperature, the normal time to achieve very hot water ranges from 1 to 2 minutes depending on the initial temperature. If you consistently need more than 3 minutes, it is a sign of a problem to explore.

User manual HOTPOINT-ARISTON Microwave : user manuals and guides in PDF

Models HOTPOINT-ARISTON Microwave most viewed

Other categories HOTPOINT-ARISTON

Recent questions about Microwave HOTPOINT-ARISTON