Why is my F 125 machine flashing white and red while water is coming in properly?

Question

Accepted Answer

According to the manual, the flashing white and red indicators indicate two main possibilities:

1. Normal startup (red flashing only): If only the red indicator is flashing, this is normal during the first 3 minutes at startup. Wait for the cycle to finish.

2. Condenser overheating alarm: If the red stays on or alternates with the white, the condenser is overheating. Check:

Cleaning of the condenser (dust, limescale)
Condenser fan (noise, blockage)
Free space around the appliance (at least 10 cm)
Ambient temperature (must be between 10-40°C; reposition if hotter)

3. Sensor problem: If abnormal flashing persists after cleaning, the evaporator sensor (minimum -1°C) or the infrared optical sensor may be faulty (ice level detection). Contact an authorized technician.

Tip: Start by cleaning the condenser and the optical sensors. Most indicator problems arise from limescale or dust deposits.

User manual BARTSCHER Ice machine : user manuals and guides in PDF

Models BARTSCHER Ice machine most viewed

Other categories BARTSCHER

Recent questions about Ice machine BARTSCHER