Q: Where should I place the water pad of the QLIMA LK3006?

The small sponge rectangle you found is the water pad of the QLIMA LK3006. It is an important component of the cooling and humidification system of your air cooler. Positioning the pad: The water pad must be repositioned in the main water tank (the 6-liter one). It is part of the water circulation system that ensures cooling through evaporation. Maintenance of the pad According to the QLIMA LK3006 manual: The water pad detaches from the filter during cleaning (cleaning recommended every two weeks) It must be rinsed and replaced after each cleaning The water in the tank should be changed every 3-4 days If the pad was detached from the tank, simply place it back in its original position inside the main water tank. Ensure it is properly positioned before filling the tank.

Question 1

Where should I place the water pad of the QLIMA LK3006?

Accepted Answer

The small sponge rectangle you found is the water pad of the QLIMA LK3006. It is an important component of the cooling and humidification system of your air cooler.

Positioning the pad: The water pad must be repositioned in the main water tank (the 6-liter one). It is part of the water circulation system that ensures cooling through evaporation.

Maintenance of the pad

According to the QLIMA LK3006 manual:

The water pad detaches from the filter during cleaning (cleaning recommended every two weeks)
It must be rinsed and replaced after each cleaning
The water in the tank should be changed every 3-4 days

If the pad was detached from the tank, simply place it back in its original position inside the main water tank. Ensure it is properly positioned before filling the tank.

Question 2

Should the cardboard be removed from the filter before installation on the QLIMA LK3006?

Accepted Answer

Yes, you must remove the cardboard before using the filter.

The protective cardboard that wraps the filter at the packaging outlet should only be used during transport and storage. It is a temporary protective material designed to protect the filter from dust and damage during delivery.

Before installing the filter on your QLIMA LK3006, completely remove this cardboard. The filter must be completely free and clear to allow for air circulation and the proper functioning of the device.

Installation: Once the cardboard is removed, the filter is inserted into the unit as explained in the maintenance section of the manual. You can remove it by pulling on the filter handle to clean it every 15 days as recommended by the manufacturer.

User manual QLIMA Fan : user manuals and guides in PDF

Models QLIMA Fan most viewed

Other categories QLIMA

Recent questions about Fan QLIMA