Q: Error code E 03 on HOOVER H-WASH 300 LITE washing machine

The error code E 03 on your HOOVER H-WASH 300 LITE generally indicates a water supply issue or a malfunction of the water level sensor . Checks to perform: Check that the hot and cold water taps are fully open Ensure that the supply hoses are not bent, crushed, or blocked Clean the water inlet filter (located at the back of the machine, at the junction of the hoses) - limescale can clog it Check that no air bubble is trapped in the hoses - run the tap before connecting Restart the machine by turning it off for 30 seconds and then turning it back on If the problem persists despite these checks, the water sensor is likely faulty and requires technical intervention.

Q: How to wash and dry cotton bed linen so that it is completely dry?

Washing Program To wash your cotton bed linen, select the Cotton program on your HOOVER HDB 854DN/1-80 machine: Temperature: 40°C for normal laundry , up to 60°C if the laundry is very dirty Maximum load: 8 kg Pour the detergent into the compartment II of the drawer This program includes maximum spin speeds to remove moisture before drying. Complete Drying Program To completely dry your bed linen: Select the Cotton Drying program Maximum load for drying: 5 kg (less than for washing) Choose the Extra Dry level for complete and guaranteed drying The machine includes a 10-minute cooling phase at the end of the cycle This combination ensures that your bed linen will be perfectly washed and completely dry. If you prefer a result that does not require ironing, you can also use the Cupboard Dry level.

Q: At what temperature does the Rapid Care cycle operate?

The Rapid Care cycle of the HOOVER THOSQ275D3-S operates at a fixed temperature of 40°C , regardless of the chosen duration. This program offers three duration options: Rapid Care 14'' - 40°C Rapid Care 30'' - 40°C Rapid Care 44'' - 40°C The temperature of 40°C is an average temperature that provides an excellent balance between cleaning efficiency and energy savings. This cycle is specially designed for small loads and lightly soiled items, allowing you to save on water, energy, detergent, and time. You can adjust the duration according to your needs while keeping the same temperature. Options such as pre-wash, rinse+, soil level, and delayed start (up to 24h) are available to further customize your cycle.

Q: How to activate the child lock from the hOn app?

Activation via physical buttons: The child lock is activated by pressing both the "B" (TEMPERATURE SELECTION) and "C" (SPIN SELECTION) buttons simultaneously for 3 seconds . A light indicator will turn on to confirm activation. To deactivate, repeat the same action or turn off the machine. Via the hOn app: The manual for this H5WPB447AMBCB8-S washer does not explicitly mention a child lock function in the hOn app. The described Wi-Fi features mainly concern starting and stopping cycles remotely, not locking the controls. It is possible that this function is available directly in the app without being detailed in the paper manual - check the hOn app directly to verify.

Question 1

Error code E 03 on HOOVER H-WASH 300 LITE washing machine

Accepted Answer

The error code E 03 on your HOOVER H-WASH 300 LITE generally indicates a water supply issue or a malfunction of the water level sensor.

Checks to perform:

Check that the hot and cold water taps are fully open
Ensure that the supply hoses are not bent, crushed, or blocked
Clean the water inlet filter (located at the back of the machine, at the junction of the hoses) - limescale can clog it
Check that no air bubble is trapped in the hoses - run the tap before connecting
Restart the machine by turning it off for 30 seconds and then turning it back on

If the problem persists despite these checks, the water sensor is likely faulty and requires technical intervention.

Question 2

What is the position of compartment 2 in the detergent drawer?

Accepted Answer

According to the documentation for your HOOVER HWASH 300 LITE H3W 492DES machine, the detergent drawer has three distinct compartments:

Compartment 1 - For pre-wash detergent
Compartment with symbol - For special additives (softeners, fragrances)
Compartment 2 - For the main wash cycle detergent

The exact position of each compartment (left, center, right) is detailed in figure 9 of the user manual, visible in the viewer of the notice above.

Helpful tip: Compartment 2 can accommodate a specific liquid dosing container (see figure 10) that releases the detergent at the optimal time during the cycle for better washing efficiency.

Question 3

Where to put bleach and which cycle to use?

Accepted Answer

To use bleach in your HOOVER HWASH 300 LITE H3W 492DES:

Compartment

Pour the bleach into the container provided in compartment "2" of the detergent drawer. This is the main compartment where the washing detergent is normally placed. The special container for liquid detergent is provided in this location.

Recommended cycle

Select the RINSE program to apply the bleach as a pre-treatment. This program performs 3 rinses with intermittent spinning.

Procedure

Add the bleach to compartment 2
Select the RINSE program
Start the cycle
At the end of the program, stop the machine
Add the rest of the laundry
Select the appropriate washing program

This function is available on models equipped with a compartment for liquid detergent.

Question 4

How to wash and dry cotton bed linen so that it is completely dry?

Accepted Answer

Washing Program

To wash your cotton bed linen, select the Cotton program on your HOOVER HDB 854DN/1-80 machine:

Temperature: 40°C for normal laundry, up to 60°C if the laundry is very dirty
Maximum load: 8 kg
Pour the detergent into the compartment II of the drawer

This program includes maximum spin speeds to remove moisture before drying.

Complete Drying Program

To completely dry your bed linen:

Select the Cotton Drying program
Maximum load for drying: 5 kg (less than for washing)
Choose the Extra Dry level for complete and guaranteed drying
The machine includes a 10-minute cooling phase at the end of the cycle

This combination ensures that your bed linen will be perfectly washed and completely dry. If you prefer a result that does not require ironing, you can also use the Cupboard Dry level.

Question 5

How to change the display language of the HOOVER HBWP 6106BL8-80 washing machine?

Accepted Answer

To change the display language of your HOOVER HBWP 6106BL8-80 washing machine, here are the general steps that apply to models of this brand:

Accessing the settings menu:

Press the Menu or Settings button on the control panel (usually located at the bottom of the dashboard)
Hold it down for 2-3 seconds to access the advanced settings
Navigate with the arrow buttons (if available) or the +/- buttons to select Language
Confirm your selection with the OK or Confirm button

Selecting the language:

A dropdown menu will display the available languages for this model
Choose your preferred language from the options provided
Confirm and the washing machine will restart with the new language

Note: If you cannot find this option in your PDF manual or if the above steps do not exactly match your model, refer to the Settings section of the user manual provided with your device, or contact HOOVER support for precise instructions.

Question 6

How to use the delayed start on the HOOVER HWASH 300 PRO?

Accepted Answer

Here’s how to program a delayed start on your machine:

Activation Steps

Select the desired washing program using the program selector
Press the DELAYED START button - each press adds 1 hour of delay
Continue pressing until you reach the desired delay (maximum 24 hours)
Press START/PAUSE to validate and start the countdown

Important Points

Cancellation: set the program selector to OFF before starting the cycle
Maximum Delay: 24 hours - beyond that, the system automatically resets
Important Restriction: do not use the pre-wash mode with a delayed start, this combination is not compatible
Automatic Backup: in case of a power outage, the machine restores the program and resumes the cycle when power is restored

This function is ideal for scheduling your wash up to 24 hours in advance and taking advantage of off-peak electricity hours.

Question 7

What is the model number of the PCB of the HOOVER DYN 9144DG/L2-80 washing machine?

Accepted Answer

The manual for the HOOVER DYN 9144DG/L2-80 washing machine does not explicitly mention the model number of the PCB (printed circuit board). This detailed technical information is generally not included in the user manual, as it is intended for repair technicians.

If you need to order a replacement part or access the precise specifications of the PCB for a repair, we recommend contacting HOOVER customer service directly:

UK Phone Number: 08444 995599 or 01204 556 111
Have your appliance's serial number ready (visible on the nameplate at the back or inside the door)
The technical service will be able to provide you with the exact reference of the PCB and the corresponding replacement parts

Question 8

At what temperature does the Rapid Care cycle operate?

Accepted Answer

The Rapid Care cycle of the HOOVER THOSQ275D3-S operates at a fixed temperature of 40°C, regardless of the chosen duration.

This program offers three duration options:

Rapid Care 14'' - 40°C
Rapid Care 30'' - 40°C
Rapid Care 44'' - 40°C

The temperature of 40°C is an average temperature that provides an excellent balance between cleaning efficiency and energy savings. This cycle is specially designed for small loads and lightly soiled items, allowing you to save on water, energy, detergent, and time.

You can adjust the duration according to your needs while keeping the same temperature. Options such as pre-wash, rinse+, soil level, and delayed start (up to 24h) are available to further customize your cycle.

Question 9

How to activate the child lock from the hOn app?

Accepted Answer

Activation via physical buttons:

The child lock is activated by pressing both the "B" (TEMPERATURE SELECTION) and "C" (SPIN SELECTION) buttons simultaneously for 3 seconds. A light indicator will turn on to confirm activation. To deactivate, repeat the same action or turn off the machine.

Via the hOn app:

The manual for this H5WPB447AMBCB8-S washer does not explicitly mention a child lock function in the hOn app. The described Wi-Fi features mainly concern starting and stopping cycles remotely, not locking the controls. It is possible that this function is available directly in the app without being detailed in the paper manual - check the hOn app directly to verify.

Question 10

Does the child lock remain active when using remote control via the hOn app?

Accepted Answer

This is an excellent safety question. Here’s how these two systems work on the H5WPB447AMBCB8-S:

Both systems are independent

The child lock (activated by pressing and holding buttons B and C simultaneously for 3 seconds) only locks the physical controls of the panel to prevent accidental changes to the current program.

The remote control via the hOn app operates on a completely separate system. To use this mode, you need to set the selector to “REMOTE CONTROL” - which temporarily disables the physical panel in favor of the app.

Security implications

When you activate remote control, the child lock does not block the hOn app commands, as these two systems operate independently. The child lock only protects against manipulations of the physical panel, not against commands sent via Wi-Fi.

If security during remote control is a concern, consider:

Using a strong password for the hOn app
Keeping your Wi-Fi network secure (protected 2.4 GHz connection)
Monitoring remote access to the device

User manual HOOVER Washing machine : user manuals and guides in PDF

Models HOOVER Washing machine most viewed

Other categories HOOVER

Recent questions about Washing machine HOOVER