Question 1

How to disable the automatic callback on a GIGASET SL910 cordless phone?

Accepted Answer

To disable the automatic callback on your GIGASET SL910 cordless phone, follow the steps below:

Access the main menu: Press the Menu button on your handset.
Open the settings: Use the arrows to navigate to Settings or Preferences and confirm with the OK button.
Find the option related to callbacks: Look for a section like Ringtones, Alerts, or Callback.
Disable the automatic callback: Select the Automatic Callback or Callback option and choose Disabled or Off.
Confirm and exit: Confirm your choice and exit the menu. The automatic callback will now be disabled.

This feature allows you to stop automatic alerts for unanswered call callbacks, which can be useful if you do not wish to be disturbed by these notifications.

Question 2

Why does my GIGASET DL500A cordless phone not emit any signal and how can I resolve this issue?

Accepted Answer

If your GIGASET DL500A cordless phone is not emitting any signal, several causes may be responsible for this malfunction. Here are the steps to follow to identify and resolve the issue:

1. Check the base connections

Ensure that the phone base is properly plugged into a functional power outlet.
Check that the telephone cable is properly connected to the wall socket and the base.

2. Check the handset registration

The handset must be registered to the base to function. If it is not, it will not be able to emit a signal.
Proceed with a new registration of the handset to the base according to the specific procedure for the GIGASET DL500A.

3. Test the telephone line

Plug another phone into the same socket to check that the line is functioning correctly.
If the other phone does not work either, the problem is likely with the telephone line.

4. Check the handset battery

Ensure that the battery is properly installed and sufficiently charged.
A weak or defective battery may prevent the handset from emitting a signal.

5. Eliminate interference

Keep the phone and its base away from other electronic devices that may cause interference (microwaves, Wi-Fi routers, etc.).

6. Reset the phone

As a last resort, perform a factory reset of the phone.
Note that this operation will erase saved data, so be sure to back up your contacts if possible.

By following these steps, you should be able to identify the cause of the problem and restore the normal functioning of your GIGASET DL500A phone.

Question 3

How to disable the silent mode on a GIGASET SL910 cordless phone?

Accepted Answer

To disable the silent mode on your GIGASET SL910 cordless phone, follow the steps below:

Access the main menu: Press the Menu button on your phone.
Open settings: Use the navigation arrows to select Settings, then press OK.
Access sound options: In the settings menu, choose Sound.
Disable silent mode: Look for the Silent mode option and select it. You will then be able to choose to disable this mode.

Once these steps are completed, the silent mode will be disabled and your phone will emit the usual sounds during calls or other notifications.

If you cannot find this option or if the menus differ, please refer to the official user manual for your GIGASET SL910, available on the manufacturer's website or on online manual platforms.

User manual GIGASET Cordless phone : user manuals and guides in PDF

Models GIGASET Cordless phone most viewed

Other categories GIGASET

Recent questions about Cordless phone GIGASET