How do I program the MEDION ND 4689 universal remote to turn on my Nasco television?

Question

Accepted Answer

Your MEDION ND 4689 universal remote does not have a dedicated code for Nasco televisions in the provided code list. You need to use the automatic code search method described below.

Before you start: Manually turn on your Nasco television using its power button.

Step 1 - Activating the search Press and hold the SET button for about 3 seconds until the LED indicator stays on continuously. Then release the SET button.

Step 2 - Selecting the device type Briefly press the TV button to indicate that you are programming a television. The LED indicator should blink briefly.

Step 3 - Starting the automatic search Point the remote at your Nasco television and briefly press the CHAN+ (next channel) button once. The remote will then automatically send the codes one after the other, about one code per second. You will see the LED indicator light up with each code sent. You can also use the POWER or PLAY button if the CHAN+ button does not work.

Step 4 - Validating the code As soon as your Nasco television responds to the remote (turns on, off, changes channel, etc.), immediately press the OK button to store this code. The code will be saved.

Practical tip: If the search is too fast and you do not have enough time to test each code, you can slow down the process (one code every 3 seconds instead of one second) by pressing twice briefly on the CHAN+ button in step 3. About 350 codes are pre-programmed in this remote, so your Nasco television code should be found automatically even if it is not listed among the brands.

User manual MEDION Universal remote : user manuals and guides in PDF

Models MEDION Universal remote most viewed

Other categories MEDION

Recent questions about Universal remote MEDION