How to resolve the Err error after changing the battery on the CAMRY EB9323 scale?

Q: How to resolve the Err error after changing the battery on the CAMRY EB9323 scale?

The "-Err" error appears after a battery change because the scale requires a reset or calibration. Here’s how to resolve this issue: Troubleshooting Steps Quick Reset : Press and hold the ZERO (or TARE) button for 3 to 5 seconds until the display turns off and then back on. This action resets the scale. Check Battery Installation : Remove the battery for 30 seconds, then reinsert it correctly ensuring the contacts are properly in place. This forces a complete restart. Calibration : Place the scale on a flat and stable surface, away from any vibrations. Press the MODE button or a calibration button (depending on your model) to initiate automatic calibration. Do not place anything on the scale during this operation. Test After Reset : Once the scale has restarted correctly and passes the initial self-test (displaying 0.0), the "-Err" error should no longer appear during use. If the error persists after these steps, it is possible that an internal sensor is defective or that the battery is not compatible with the EB9323 model. Check the required battery type in your documentation.

Question

Accepted Answer

The "-Err" error appears after a battery change because the scale requires a reset or calibration. Here’s how to resolve this issue:

Troubleshooting Steps

Quick Reset: Press and hold the ZERO (or TARE) button for 3 to 5 seconds until the display turns off and then back on. This action resets the scale.
Check Battery Installation: Remove the battery for 30 seconds, then reinsert it correctly ensuring the contacts are properly in place. This forces a complete restart.
Calibration: Place the scale on a flat and stable surface, away from any vibrations. Press the MODE button or a calibration button (depending on your model) to initiate automatic calibration. Do not place anything on the scale during this operation.
Test After Reset: Once the scale has restarted correctly and passes the initial self-test (displaying 0.0), the "-Err" error should no longer appear during use.

If the error persists after these steps, it is possible that an internal sensor is defective or that the battery is not compatible with the EB9323 model. Check the required battery type in your documentation.

User manual CAMRY Scale : user manuals and guides in PDF

Models CAMRY Scale most viewed

Other categories CAMRY

Recent questions about Scale CAMRY