How to increase the speed of the SHARP EMKS1 scooter?

Question

Accepted Answer

The SHARP EMKS1 scooter offers three predefined speed modes. Here’s how to access the maximum speed:

The three available speed modes

Walk Mode: 6 km/h maximum
Medium Mode: 20 km/h maximum
Maximum Mode: 25 km/h maximum

How to change speed mode

Quickly press the light button to switch between modes. The display shows the active mode and the scooter switches from one regime to another with each press.

To reach the maximum speed, select the Maximum Mode which allows you to go up to 25 km/h. Once this mode is activated, use the progressive throttle on the handle to accelerate to this limit.

Speed regulation function (Cruise Control)

Once your desired speed is reached in Maximum Mode, you can activate the speed regulation by holding the throttle down for 9 seconds. A beep confirms activation. Engage the handbrake to deactivate this function.

Important: The maximum speed of the scooter is technically limited to 25 km/h in Maximum Mode. This is a hardware limitation of the product that cannot be exceeded. Always adhere to local speed limits applicable to electric scooters in your area.

User manual SHARP Scooter : user manuals and guides in PDF

Models SHARP Scooter most viewed

Other categories SHARP

Recent questions about Scooter SHARP