How to correct a delay between sound and image on the ED40A06FHD-RE?

Question

Accepted Answer

A slight delay between sound and image can have several causes. Here’s how to check the settings on your ED40A06FHD-RE:

Check the TV audio settings

Go to All Settings > Sound and make sure you are using the appropriate Sound Mode (Standard, Cinema, Music, Speech, Night, Sports).
Test different modes to see if any of them reduce the delay.
You can also adjust the Sound Mode Settings to refine the audio output.

Check the source of the problem

Unfortunately, the manual for the ED40A06FHD-RE does not provide a dedicated setting to correct audio-video delay (lip sync). The issue may come from:

Your TV decoder, internet box, or streaming device - these devices often have an audio delay option that you can adjust.
The received signal (broadcast, streaming) which may naturally contain a slight delay.

Tip: First check the settings of your connected device (decoder, box, etc.) before contacting EDENWOOD support.

User manual EDENWOOD TV : user manuals and guides in PDF

Models EDENWOOD TV most viewed

Other categories EDENWOOD

Recent questions about TV EDENWOOD