Q: What does the message "My button is set" displayed on my TV screen mean?

The message "My button is set" displayed on your EDENWOOD ED65A03UHD-VE TV screen is a confirmation message . It means that you have successfully assigned a custom function to the "My Button 1" on your remote control. This is not an error; it is completely normal. How the "My Button 1" works: This button has default functions depending on the model, but you can assign it a special custom function. To do this, simply press the "My Button 1" on your remote control for more than three seconds while you are on a source, channel, or application that you want to access quickly. A confirmation message will immediately appear on the screen to inform you that the configuration has been successfully saved. From that moment on, a simple press of this button will take you directly to the channel, source, or application you have saved. How to find your favorite content: Once you have configured the "My Button 1", you can quickly access the saved content by simply pressing this button once. It is a convenient function for instantly accessing your favorite channels, applications, or sources without going through the menus. How to reset the button: If you want to restore the default functions of the "My Button 1", you can perform an "Initial Setup" of your TV from the Settings menu. This action will reset all the remote control buttons to their factory default configuration.

Q: How do I turn on the EDENWOOD ED65A09UHD-VE television if I can't find the power button?

Your EDENWOOD ED65A09UHD-VE television has a single control button that allows you to manage all the main functions, including turning it on. This button is usually located on the lower front panel or on one of the sides of the television frame, but its position may vary depending on the model. It is often small and can be easily overlooked. Carefully check these areas before looking elsewhere. The simplest method to turn on your television is by using the remote control . Press one of these buttons to wake the TV from standby mode: Standby , Guide, Netflix, Prime Video, or Freeview Play. If the remote control does not respond, check that the batteries are new and properly installed. If you find the physical control button and the television is in standby mode (the LED indicator remains on), simply press this button to turn it on. A simple press is enough to power the device. Also, ensure that the power cord is properly plugged into a functional electrical outlet. The cable connects to the back of the television, usually near the HDMI connectors and other ports. If the television has no visible indicator light and does not respond to the control button after being plugged in, first test the electrical outlet with another device to ensure it is working.

Question 1

How to reset the EDENWOOD ED50A02UHD-VE TV?

Accepted Answer

The EDENWOOD ED50A02UHD-VE TV offers four reset options depending on your needs:

Reset the home screen and applications

To restore your home screen to the default settings, access the main menu of your TV via the remote control and select the Reset Applications option. A confirmation message will appear on the screen. Highlight Yes and press OK to continue. Note that you will not be able to repeat this operation for a few minutes after it has been executed.

Reset image settings

To restore the image settings to factory values, go to the Settings menu and then to Image. Scroll down to the Reset option and press OK. This will return all image settings (contrast, brightness, sharpness, color, etc.) to the manufacturer's default values. Important: Game mode retains its specific settings even after this reset.

Reset sound settings

To reset the sound, go to the Settings menu and then Sound. Select the Reset option and press OK. This action will return certain audio settings (volume, balance, sound mode) to the factory default values.

Complete TV reset

For a total reset that returns the TV to its factory state, delete all stored channels and all settings. Access the Settings menu, then Installation and select First Installation. This operation will delete all saved TV channels, all custom settings, and completely restore the TV. Use this option only if you are experiencing serious issues or wish to completely restore your device.

Question 2

How do I force my EDENWOOD ED65A03UHD-VE TV into standby mode?

Accepted Answer

To force your EDENWOOD ED65A03UHD-VE TV into standby mode, press and hold the Standby button (power button) on the remote control for about 5 seconds.

This function is particularly useful if your TV is not responding to normal commands. Forced standby interrupts any frozen processes and allows the device to restart properly.

Additional Information

Normal standby: Briefly press the Standby button for standard standby.
Restart from standby: Press any button on the remote control to reactivate the TV.
Standby consumption: Less than 2W in standby mode.
Automatic standby: The TV automatically goes into standby after 8+ hours of use without commands.

Question 3

What does the message "My button is set" displayed on my TV screen mean?

Accepted Answer

The message "My button is set" displayed on your EDENWOOD ED65A03UHD-VE TV screen is a confirmation message. It means that you have successfully assigned a custom function to the "My Button 1" on your remote control. This is not an error; it is completely normal.

How the "My Button 1" works: This button has default functions depending on the model, but you can assign it a special custom function. To do this, simply press the "My Button 1" on your remote control for more than three seconds while you are on a source, channel, or application that you want to access quickly. A confirmation message will immediately appear on the screen to inform you that the configuration has been successfully saved. From that moment on, a simple press of this button will take you directly to the channel, source, or application you have saved.

How to find your favorite content: Once you have configured the "My Button 1", you can quickly access the saved content by simply pressing this button once. It is a convenient function for instantly accessing your favorite channels, applications, or sources without going through the menus.

How to reset the button: If you want to restore the default functions of the "My Button 1", you can perform an "Initial Setup" of your TV from the Settings menu. This action will reset all the remote control buttons to their factory default configuration.

Question 4

The Volume + button lights up orange but does not change the volume

Accepted Answer

This symptom indicates that the volume button is in standby mode, but the command is not being properly registered by the TV. Here’s how to resolve this issue:

Check correct activation: Press and hold the central control button for 3 seconds (not directly on Volume +). The options menu should appear on the screen. Then, navigate to the Volume + option using the same central button.
Hold the button, do not click: Once the Volume + option is highlighted, keep the button pressed (for an additional 1-2 seconds) instead of clicking quickly multiple times. The TV should respond with a gradual increase in volume.
Reset the TV: If the problem persists, completely turn off the TV (unplug for 30 seconds), then restart it. This resets the built-in control system.
Clean the button: A buildup of dust or dirt under the control button may block the impulses. Gently clean around the button with a dry cloth.

If the volume changes but very slowly or in large jumps, use your original remote control or the FollowMe TV function via the Smart Center app to adjust the volume more responsively.

Question 5

How do I adjust the volume of my EDENWOOD ED55A07UHD-VE TV without a remote control?

Accepted Answer

If you have lost or forgotten your remote control, your EDENWOOD ED55A07UHD-VE TV has a built-in control button that allows you to adjust the volume.

Adjusting the volume with the control button

Locate the single control button located on the TV's casing.
Press once on the button to display the function options menu.
Press successively on the button to move the focus to the Volume + option (to increase) or Volume - option (to decrease). The icon changes color when selected.
Hold the button down for about 2 seconds to activate the volume adjustment.
Press quickly to increase or decrease the volume as needed.

This same button also allows you to control other essential functions: standby/on, source selection, channel change (Program +/-), and access to the options menu.

Question 6

How to reset the UHD 4K EDENWOOD ED65A01UHD-VE TV to factory settings?

Accepted Answer

To reset your EDENWOOD ED65A01UHD-VE television to factory settings, follow the steps below:

Reset Steps

Turn on the television and press the Menu button on the remote control to access the main menu.
Access the settings using the navigation arrows to select the Settings or Configuration menu.
Find the reset option: look for a section named Reset, Factory Reset or Restore Factory Settings.
Confirm the reset by selecting this option and following the on-screen instructions. You will need to confirm that you want to erase all customizations.
Wait for the restart: the television will automatically restart and return to factory settings.

Important

The reset will erase all your custom settings, including picture settings, recorded channels, and preferences. Make sure to back up or note important information before proceeding.

Question 7

How to reset the EDENWOOD ED55A04UHD-VE UHD 4K television to factory settings?

Accepted Answer

To reset your EDENWOOD ED55A04UHD-VE television to complete factory settings, go to the Initial Setup option in the Settings menu.

Steps to follow:

Press the Menu button on your remote control
Navigate to Settings
Go to the System submenu
Select Initial Setup
Confirm your choice (the default PIN is usually 0000 or 1234 if prompted)
Wait while the television restarts

Important: This option will delete all saved channels, all custom settings, installed applications, and all stored data. The television will be completely reset to factory settings.

If you want to reset only the home menu without losing channels, use the Reset Applications option available in the TV menu instead. This option restores only the customizations of the home menu.

Other available partial resets: You can also separately reset the picture settings (Settings menu > Picture > Reset) or the sound settings (Settings menu > Sound > Reset) if you only want to reset these specific aspects of the television.

Question 8

How do I turn on the EDENWOOD ED65A09UHD-VE television if I can't find the power button?

Accepted Answer

Your EDENWOOD ED65A09UHD-VE television has a single control button that allows you to manage all the main functions, including turning it on. This button is usually located on the lower front panel or on one of the sides of the television frame, but its position may vary depending on the model. It is often small and can be easily overlooked. Carefully check these areas before looking elsewhere.

The simplest method to turn on your television is by using the remote control. Press one of these buttons to wake the TV from standby mode: Standby, Guide, Netflix, Prime Video, or Freeview Play. If the remote control does not respond, check that the batteries are new and properly installed.

If you find the physical control button and the television is in standby mode (the LED indicator remains on), simply press this button to turn it on. A simple press is enough to power the device.

Also, ensure that the power cord is properly plugged into a functional electrical outlet. The cable connects to the back of the television, usually near the HDMI connectors and other ports. If the television has no visible indicator light and does not respond to the control button after being plugged in, first test the electrical outlet with another device to ensure it is working.

Question 9

How to access the settings on the UHD 4K EDENWOOD ED65C03UHD-VE TV?

Accepted Answer

Your EDENWOOD ED65C03UHD-VE TV offers two ways to access the settings depending on your needs. To access the Live TV Settings menu while watching a channel, press the Menu button on your remote control. You will then see the available adjustment options such as sound and picture.

To access the full settings of your television, press the Home button on your remote control to display the Android home screen. Then navigate to the Settings option using the directional buttons on your remote control (Up, Down, Left, Right), and press OK to confirm your selection.

In the Settings menu, you will find the following subsections:

Device Preferences - to configure location, usage diagnostics, reset, and input preferences (HDMI EDID Version)
Network & Internet - to configure your Wi-Fi connection and network settings
Picture - to adjust picture mode and display settings (especially for Dolby Vision content)
Channels - to search for and manage your television channels
Apps - to manage the apps installed on your TV

To navigate through these menus, use the directional buttons to move, press OK to access a submenu or confirm a selection, and use the Back button to return to the previous menu. You can also access some settings directly in live TV mode via the TV Options menu by pressing the Menu button.

Note: If you wish to perform a complete setup or reset of your EDENWOOD ED65C03UHD-VE TV, you can restart the initial setup wizard at any time from the Reset option available in Settings > Device Preferences.

Question 10

How to perform a factory reset on the UHD 4K EDENWOOD ED65C03UHD-VE TV?

Accepted Answer

To reset your EDENWOOD ED65C03UHD-VE TV to factory settings, access the reset menu by following these steps:

Press the Menu button on your remote control to display the options menu.
Select TV Options using the navigation arrows, then press OK.
Go to Settings > Device Preferences by navigating with the directional arrows.
Look for the Reset option in this submenu and select it.
Highlight Reset and press OK. A confirmation message will appear.
Select Clear All to confirm the reset.

Reset process: Your TV will first turn off, then automatically restart in initial setup mode. The home screen and setup assistant will appear. You will then need to reconfigure the language, region, internet connection, TV channels, and your preferences. This process may take a few minutes.

Important: The factory reset permanently erases all your custom settings, installed applications, login data, and channel lists. Make sure this is really what you want before confirming with “Clear All”. To cancel the operation before the final confirmation, select Cancel.

User manual EDENWOOD 4K UHD TV : user manuals and guides in PDF

Models EDENWOOD 4K UHD TV most viewed

Other categories EDENWOOD

Recent questions about 4K UHD TV EDENWOOD