Question 1

How to adjust the tonearm of the EDENWOOD Vintage micro-system?

Accepted Answer

To properly adjust the tonearm of your EDENWOOD Vintage micro-system, follow these precise steps:

1. Unlocking the tonearm

Make sure the tonearm is unlocked so you can handle it freely. Generally, a lever or button allows you to release the arm. Check that this mechanism is indeed disabled.

2. Balancing the arm

Gently lift the tonearm and place it above the platter without touching the vinyl.
Adjust the counterweight located at the back of the arm by slowly turning it one way or the other.
The goal is for the arm to remain perfectly horizontal, balanced, without the stylus touching the platter.

3. Adjusting the tracking force

Once the arm is balanced, turn the counterweight to adjust the tracking force of the stylus on the vinyl.
This force is usually indicated in grams and should match the recommendations of the stylus manufacturer.
Correct adjustment ensures good sound quality and preserves the lifespan of the vinyl and the stylus.

4. Final check

Gently lower the arm onto a vinyl record to check that the stylus sits correctly and that playback is stable and clear.

A precise adjustment of the tonearm is essential to optimize sound quality and protect your records. Feel free to repeat these steps if necessary to achieve a perfect setting.

Question 2

How to solve vinyl skipping issues on an EDENWOOD Vintage micro-system?

Accepted Answer

If your vinyls are skipping during playback on your EDENWOOD Vintage micro-system, several causes may be responsible for this problem. Here’s how to proceed to try to resolve it:

1. Clean the vinyl

Dirt, dust, or residues on the surface of the record can cause skips. Use an anti-static brush or a soft, lint-free cloth to gently clean the vinyl before each playback.

2. Check the condition of the stylus (needle)

A worn, damaged, or dirty stylus can cause skips. Inspect it visually and gently clean it with an appropriate brush. If the stylus is damaged, it needs to be replaced to ensure proper playback.

3. Adjust the tonearm

Make sure that the tonearm is well balanced and that the tracking force applied by the stylus on the vinyl is in accordance with the manufacturer's recommendations. A tracking force that is too low or too high can lead to skips.

4. Examine the vinyl

Deep scratches or physical defects on the record can cause unavoidable skips. In this case, the problem lies with the vinyl itself.

5. Stabilize the turntable

Place the micro-system on a flat, stable surface that is free from vibrations. Movements or vibrations during playback can destabilize the tonearm and cause skips.

By following these steps, you should be able to reduce or eliminate skips when playing your vinyls on the EDENWOOD Vintage micro-system.

User manual EDENWOOD Micro system : user manuals and guides in PDF

Models EDENWOOD Micro system most viewed

Other categories EDENWOOD

Recent questions about Micro system EDENWOOD