How to install the deflector on a DEVILLE C07832 - 04-05 appliance?

Question

Accepted Answer

To install or reassemble the deflector on your DEVILLE C07832 - 04-05 insert, you need to perform the operations in the reverse order of disassembly. The deflector of this fireplace insert model is installed by guiding its front part towards the slides or fixing points before lowering it completely.

Before any intervention, make sure that the appliance is completely turned off and cooled down, this is imperative for safety reasons.

Steps to install the deflector:

Position the front part of the deflector towards the guides or fixing points located at the front of the insert
Gradually lower the rear part of the deflector by guiding it so that it engages correctly in its rear holding points
Check that the deflector is properly in place and stable, with no lateral or vertical movement

The deflector serves an essential function on your DEVILLE insert: it creates a secondary air zone that protects the ceramic glass from direct contact with the smoke and improves the combustion of the wood. Therefore, it is important that it is correctly positioned.

During regular maintenance, you will need to disassemble the deflector to clean the secondary air zone and the air intake grille. To disassemble, lift the deflector and pull it forward, then let the rear part drop before completely removing it. Reassembly is done by reversing this procedure.

If you are installing this insert for the first time, refer to the complete assembly instructions provided in the specific manual supplied with the appliance. Any installation must comply with safety standards and be carried out according to the manufacturer's instructions.

User manual DEVILLE Fireplace insert : user manuals and guides in PDF

Models DEVILLE Fireplace insert most viewed

Other categories DEVILLE

Recent questions about Fireplace insert DEVILLE