Question 1

How to program the automatic start of the H.KOENIG MG30 coffee maker?

Accepted Answer

The H.Koenig MG30 coffee maker has a programmed start function that allows you to set the exact time for automatic start. Before you begin, fill the water tank to the maximum (1.25 L), place a paper filter in the filter holder, pour ground coffee according to your preferences, place the carafe on the warming plate, and then plug in the device. The screen will display "12:00" by default.

Step 1 - Set the current time (CLOCK): Press the PROG button once - the word "CLOCK" appears at the top right of the screen. Use the HOUR (hours) and MIN (minutes) buttons to set the current time in 24-hour format. For example, if it is 5:10 PM, set it to 17:10.

Step 2 - Set the start time (TIMER): Press the PROG button again - the word "TIMER" appears at the top left. Using the HOUR and MIN buttons, set the time you want the coffee to start. For example, for coffee at 8:15 PM, set it to 20:15.

Step 3 - Activate programming: Press the PROG button once - the word "TIMER" disappears and the screen displays the current time. The blue indicator in the PROG button will turn off after 15 seconds. Then press twice on the ON/AUTO/OFF button. The blue indicator should start flashing - this confirms that programming is active.

At the programmed time: the blue indicator stops flashing and turns solid red, then the coffee maker starts automatically and brews the coffee. The device will turn off automatically after 40 minutes if you do not turn it off manually beforehand.

To modify or cancel: If you wish to cancel the programming, press the ON/AUTO/OFF button once to stop the machine, then press again to start immediately if desired. To modify the start time, simply repeat steps 1 to 4. You can view the programmed time by pressing PROG twice at any time.

Question 2

Why does the grinder of my H.KOENIG EXPRO980 coffee machine stop, and how can I resolve this issue?

Accepted Answer

The grinder of your H.KOENIG EXPRO980 coffee machine may stop for several reasons. Here are the most common causes and solutions to address them:

1. Insufficient coffee bean level

Check that the bean reservoir is sufficiently filled. A low level may prevent the grinder from functioning properly.

2. Clogging or fouling of the grinder

Coffee residues can block the mechanism. It is advisable to disassemble the grinder if possible and clean it thoroughly to remove any buildup of powder or stuck beans.

3. Inappropriate grind setting

A setting that is too fine can lead to a blockage of the grinder. Try adjusting the grind to a coarser setting to facilitate grinding.

4. Overheating of the grinder

Prolonged use can cause overheating, leading to the automatic shutdown of the grinder to protect the motor. Allow the machine to cool down for a few minutes before reusing the grinder.

5. Electrical issues

Ensure that the machine is properly plugged in and that the power cord is not damaged. A poor connection can interrupt the operation of the grinder.

By following these steps, you should be able to identify and resolve the issue of the grinder stopping in your H.KOENIG EXPRO980 coffee machine.

User manual H.KOENIG Coffee machine : user manuals and guides in PDF

Models H.KOENIG Coffee machine most viewed

Other categories H.KOENIG

Recent questions about Coffee machine H.KOENIG