Q: How do I turn off the FRIONOR DVM29 ceramic hob?

To turn off your FRIONOR DVM29 ceramic hob, simply turn the rotary knobs of both cooking zones to the off (0) position. This hob is equipped with two independent burners: the front one (18 cm in diameter) and the back one (14.5 cm in diameter), each with its own control knob. Once you have turned off both zones, the main indicator light will turn off. However, the residual heat indicator will remain on as long as the surface temperature exceeds 50°C. This is an important safety system to prevent burns: wait for this indicator to turn off completely before touching or cleaning the hob. After each use, always check that both knobs are properly set to zero. If you want a complete disconnection, you can unplug the device from the electrical outlet. For your safety, remember to always turn off the cooking zones and the appliance after use, according to the instructions in the manual. Never use the hob as a work surface or storage space, and never leave the appliance unattended while it is in operation.

Q: What does the error message "L" on the FRIONOR DVS2930 ceramic hob mean and how can it be resolved?

The error message "L" displayed on your FRIONOR DVS2930 ceramic hob generally indicates a problem related to safety or the detection of an anomaly on the cooking surface. Here are the possible causes and steps to follow to resolve this issue: Possible causes of the error message "L" Presence of an incompatible object or utensil on the hob. Residual heat detected after recent use. Temporary issue related to the power supply or an internal malfunction. Solutions to try Check the cooking surface: Ensure that no object, such as a pot, lid, or utensil, is left on the hob. Remove any item that may interfere with the sensor. Turn off and then turn on the hob: Cut the power to the hob, wait a few minutes for it to cool down, then turn it back on to reset the system. Check the power supply: Ensure that the hob is properly plugged in and that the electrical voltage is stable. Be patient: If the hob has been used recently, wait for it to cool down completely before attempting to turn it back on. If the error message "L" persists despite these checks, it is recommended to contact a qualified professional or the FRIONOR customer service for a thorough diagnosis and possible repair.

Question 1

Why does a red light stay on even after I have turned off the burners of my FRIONOR DVM29 ceramic hob?

Accepted Answer

You are observing a completely normal behavior: the red light that remains on is the residual heat indicator of your FRIONOR DVM29 ceramic hob. According to the manual, this indicator lights up when the surface temperature exceeds 50°C, even after the burners have been turned off. Your hob has two burners, and each has its own independent residual heat indicator.

This system serves an essential safety function: it warns you that the ceramic glass surface remains hot and should not be touched. This residual heat can cause serious burns, which is particularly dangerous in the presence of children.

The indicator will gradually turn off as your hob cools down naturally. Just let the appliance cool down quietly without intervention - the light will disappear when the temperature has dropped below 50°C. The cooling time varies depending on the duration and intensity of the previous cooking.

For your safety: never touch the surface while the indicator is on, keep children under 8 years old at a distance, and wait for the hob to cool completely before cleaning or maintaining it.

Question 2

What should I do if one of the burners on my FRIONOR DVS2930 ceramic hob is not responding to commands?

Accepted Answer

If one of the burners on your FRIONOR DVS2930 ceramic hob is not responding to commands, here are several steps to follow to try to resolve this issue:

1. Check the power supply

Make sure the hob is properly plugged in and that the power supply is stable. A power issue can prevent a burner from functioning.

2. Test the other burners

Check if the other burners are working normally. This helps determine if the problem is isolated to a single burner or if it affects the entire hob.

3. Clean the surface and controls

Carefully clean the ceramic surface and the area around the touch controls of the faulty burner. Dirt or residue may prevent the controls from being detected.

4. Reset the hob

Unplug the electric hob for about 5 minutes, then plug it back in. This operation may reset the internal circuits and resolve temporary malfunctions.

5. Check safety functions

Some ceramic hobs have safety or lock functions that may disable a burner. Check that these functions are not activated (for example, child lock).

6. Technical assistance

If after these checks the burner still does not respond, there may be a hardware fault requiring the intervention of a qualified professional or the FRIONOR after-sales service.

Question 3

How to effectively clean the FRIONOR DVM29 ceramic glass cooktop?

Accepted Answer

To effectively clean your FRIONOR DVM29 ceramic glass cooktop and maintain its appearance as well as its proper functioning, follow these simple steps:

1. Ensure the cooktop is cool

Before any cleaning operation, make sure the cooktop is completely turned off and cool to avoid any risk of burns or damage.

2. Remove food residues

Use a soft cloth or paper towel to gently remove crumbs and food debris present on the surface.

3. Apply a suitable product

Use a cleaner specifically designed for ceramic glass cooktops, or a mixture of warm water and mild soap.
Avoid abrasive products, metal sponges, or scouring pads that may scratch the surface.

4. Clean the surface

With a soft cloth or a non-abrasive sponge, gently rub the cooktop in circular motions, paying extra attention to stubborn stains or burnt residues.

5. Rinse and dry

Rinse the cloth with clear water and wipe the cooktop to remove any residue of the cleaning product. Then dry with a clean, dry cloth to avoid streaks.

6. Tip for shine (optional)

To add extra shine, you can wipe the surface with a cloth dampened with a little white vinegar, then wipe immediately.

By regularly following these tips, your FRIONOR DVM29 ceramic glass cooktop will remain clean, shiny, and function optimally.

Question 4

How do I turn off the FRIONOR DVM29 ceramic hob?

Accepted Answer

To turn off your FRIONOR DVM29 ceramic hob, simply turn the rotary knobs of both cooking zones to the off (0) position. This hob is equipped with two independent burners: the front one (18 cm in diameter) and the back one (14.5 cm in diameter), each with its own control knob.

Once you have turned off both zones, the main indicator light will turn off. However, the residual heat indicator will remain on as long as the surface temperature exceeds 50°C. This is an important safety system to prevent burns: wait for this indicator to turn off completely before touching or cleaning the hob.

After each use, always check that both knobs are properly set to zero. If you want a complete disconnection, you can unplug the device from the electrical outlet. For your safety, remember to always turn off the cooking zones and the appliance after use, according to the instructions in the manual. Never use the hob as a work surface or storage space, and never leave the appliance unattended while it is in operation.

Question 5

How to check if the electrical cable installed for my FRIONOR DVM29 ceramic hob is indeed 6 mm²?

Accepted Answer

To check if the electrical cable installed for your FRIONOR DVM29 ceramic hob is indeed 6 mm², follow these steps:

1. Turn off the power supply

Before any handling, make sure to turn off the power supply at the main circuit breaker to avoid any risk of electrocution.

2. Access the cable

Locate the power cable of your hob. If necessary, remove any covers or conduits that protect it to be able to examine it.

3. Check the markings on the cable

Most electrical cables have printed inscriptions on their insulating sheath indicating the cable section, for example, "6 mm²". Look for these markings along the cable.

4. Measure the conductor section

If the markings are not visible, you can measure the section of the copper conductor:

Carefully strip a small part of the cable's insulation (only if you are competent to do so).
Measure the diameter of the copper wire with a caliper or a precise measuring tool.
A 6 mm² cable corresponds to a diameter of about 2.5 mm for the copper conductor.

5. Call a professional if necessary

If you have any doubts or if you cannot easily access the cable, it is strongly recommended to contact a qualified electrician to check the cable section and ensure the safety of your installation.

Question 6

How to unlock the FRIONOR DVM29 ceramic hob?

Accepted Answer

To unlock your FRIONOR DVM29 ceramic hob, follow these simple steps:

Locate the lock button: On the control panel, look for a padlock symbol or a button marked "Lock".
Press the button: Press this button. On some models, it is necessary to hold it down for about 3 to 5 seconds.
Check the display: When the lock symbol disappears from the screen or the letter "L" is no longer visible, it means that the hob is unlocked and ready to use.

If the hob remains locked despite these actions, it may be helpful to check that the hob is properly powered or to reset the device by unplugging it for a few minutes before trying again.

Question 7

How do I adjust the power of the buttons on the FRIONOR DVM29 ceramic hob from 1 to 9?

Accepted Answer

To adjust the power of the burners on your FRIONOR DVM29 ceramic hob, turn the rotary control knobs to the right to increase the power or to the left to decrease it. Each position corresponds to a power level from 1 to 9, with 1 being the minimum power and 9 the maximum power.

Power level guide:

Levels 1-2: Low temperature warming, melting chocolate and butter, cooking foods that burn easily, slow cooking in a pan
Levels 3-4: Warming, quick frying in a pan, cooking rice
Levels 5-6: Crepes and pancakes
Levels 7-8: Stir-frying, cooking pasta
Level 9: Frying, cooking soups, boiling water

A light indicator turns on as soon as at least one burner is activated. The appliance also has a residual heat indicator for each zone: this light turns on when the temperature exceeds 50°C, indicating that the surface remains hot even after the burner is turned off.

To turn off a burner, simply turn its knob to the 0 position. Even after turning off, wait for the residual heat indicator to turn off before placing your hand on the surface, as the ceramic glass retains heat.

Question 8

What does the error message "L" on the FRIONOR DVS2930 ceramic hob mean and how can it be resolved?

Accepted Answer

The error message "L" displayed on your FRIONOR DVS2930 ceramic hob generally indicates a problem related to safety or the detection of an anomaly on the cooking surface. Here are the possible causes and steps to follow to resolve this issue:

Possible causes of the error message "L"

Presence of an incompatible object or utensil on the hob.
Residual heat detected after recent use.
Temporary issue related to the power supply or an internal malfunction.

Solutions to try

Check the cooking surface: Ensure that no object, such as a pot, lid, or utensil, is left on the hob. Remove any item that may interfere with the sensor.
Turn off and then turn on the hob: Cut the power to the hob, wait a few minutes for it to cool down, then turn it back on to reset the system.
Check the power supply: Ensure that the hob is properly plugged in and that the electrical voltage is stable.
Be patient: If the hob has been used recently, wait for it to cool down completely before attempting to turn it back on.

If the error message "L" persists despite these checks, it is recommended to contact a qualified professional or the FRIONOR customer service for a thorough diagnosis and possible repair.

User manual FRIONOR Ceramic hob : user manuals and guides in PDF

Models FRIONOR Ceramic hob most viewed

Other categories FRIONOR

Recent questions about Ceramic hob FRIONOR