DSP3300 - Loudspeaker MERIDIAN - Free user manual and instructions

Product Type	Active loudspeaker with digital signal processing
Model	DSP3300
Brand	Meridian
Configuration	2-way active
Drivers	1 x 1" tweeter, 1 x 6.5" bass/mid
Amplifier Power	100W per channel (total 200W)
Frequency Response	40 Hz – 20 kHz (±3 dB)
Digital Inputs	S/PDIF (coaxial), Toslink (optical)
Analogue Inputs	RCA stereo
Control Inputs	IR, RS232, Ethernet
Remote Control	Meridian System Remote (MSR+) included
DSP Features	Phase correction, time alignment, room correction presets
Cabinet Type	Sealed
Dimensions (H x W x D)	320 x 180 x 250 mm
Weight	12 kg
Power Supply	100–240 V AC, 50/60 Hz
Standby Power	< 1 W
Operating Temperature	5 °C to 35 °C
Cleaning	Wipe with dry, soft cloth
Safety	No user-serviceable parts. Do not open.
Spare Parts & Repairability	Contact Meridian authorized service center

Frequently Asked Questions - DSP3300 MERIDIAN

How do I connect my TV to the DSP3300?

Use a digital optical cable from your TV's optical output to the Toslink input on the DSP3300. Alternatively, use a coaxial cable from your TV's S/PDIF output to the S/PDIF input. Set your TV audio output to PCM.

How do I adjust the volume?

Use the volume knob on the front panel or the Meridian System Remote. You can also adjust volume via the Meridian Control app if connected to a network.

Do I need to set up the speakers in a specific position?

Place the speakers at least 20 cm from walls to avoid bass boom. Ensure the tweeters are at ear level. Use the room correction presets in the DSP to optimize sound for your room.

Can I use the DSP3300 with a subwoofer?

Yes, the DSP3300 has a subwoofer output (RCA). Connect an active subwoofer and configure the crossover setting via the DSP menu or remote.

How do I perform a factory reset?

Press and hold the Standby button on the front panel for 10 seconds until the LED flashes. Release the button; the speaker will reboot to factory defaults.

What is the meaning of the LED indicators?

A solid blue LED indicates normal operation. Flashing blue means standby. Red indicates an error or mute. Refer to the user manual for detailed LED codes.

How do I update the firmware?

Download the latest firmware from the Meridian website. Transfer it to a USB drive, insert into the USB port on the DSP3300, and follow the on-screen prompts using the remote.

Can I control the speaker with my phone?

Yes, if the DSP3300 is connected to your home network via Ethernet, you can use the Meridian Control app (iOS/Android) to adjust volume, select presets, and switch inputs.

Why is there no sound from the speaker?

Check if the speaker is in standby (blue LED flashing). Ensure the correct input is selected. Verify that the source device is outputting audio. Try a factory reset if the issue persists.

How do I clean the speaker?

Unplug the speaker. Use a dry, soft cloth to gently wipe the cabinet and front baffle. Do not use any solvents, abrasives, or sprays. Avoid getting moisture near the drivers.

USER MANUAL DSP3300 MERIDIAN

Important safety instructions

• Read these instructions.
• Keep these instructions.
• Heed all warnings.

- Follow all instructions.

- Do not use this apparatus near water.

- Clean only with a dry cloth.

- Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

- Only use attachments/accessories specified by the manufacturer.

- Unplug this apparatus during lightning storms or when unused for long periods of time.

- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

This apparatus has been designed with Class 1 construction and must be connected to a mains socket outlet with a protective earthing connection (the third grounding pin).

This apparatus does not include a power switch. The apparatus may be isolated from mains power either by unplugging the power connector from the rear of the unit, or by unplugging the connector at the opposing end of the power cord or cable from its supply outlet. As a result, either or both of these connectors should remain accessible

Safety warnings

• Do not expose the unit to dripping or splashing.
• Do not place any object filled with liquid, such as a vase, on the unit.
• Do not place naked flame sources, such as lighted candles, on the unit.
• To avoid overheating leave at least 10cm around the equipment to ensure sufficient ventilation.
• Do not position the unit in direct sunlight, near heat sources such as a radiator, or directly on top of heat producing equipment, such as a power amplifier.
• To avoid interference do not position the unit near strong electrical or magnetic radiation, such as near a power amplifier.

Radio interference

FCC Warning: This equipment generates and can radiate radio frequency energy and if not installed and used correctly in accordance with our instructions may cause interference to radio communications or radio and television reception. It has been type-tested and complies with the limits set out in Subpart J, Part 15 of FCC rules for a Class B computing device. These limits are intended to provide reasonable protection against such interference in home installations.

EEC: This product has been designed and type-tested to comply with the limits set out in EN55013 and EN55020.

Copyright

Meridian Audio Ltd

Latham Road

Huntingdon

Cambridgeshire

PE29 6YE

England

Copyright © 2011 Meridian Audio Ltd.

Visit us on the Web:

http://www.meridian-audio.com

Part no: DSP3300 (P88398)

This guide was produced by: Human-Computer Interface Ltd, http://www.interface.co.uk/

Unpacking

The DSP3300 is supplied with the following accessories:

• Power cord.
• This manual.
• Power cord.
• This manual.

If either of these items are missing please contact your dealer.

NOTE: You should retain the packaging in case you need to transport the units.

Connections

The following diagram gives details of the connections on the base of the speaker:

Digital connections

Use this connection To connect to this

SpeakerLink input The SpeakerLink output of a Meridian

Sooloos component, Digital Surround

Controller, or Audio Core 200, or the

SpeakerLink output of another DSP

loudspeaker.

SpeakerLink output The SpeakerLink input of a second

DSP3300 digital speaker, when daisy-

chaining the speakers.

Miscellaneous

Switch Description

Digital Channel Selector Set to L/C to use the speaker as a left or centre channel speaker. Set to R to use the speaker as a right channel speaker.

Standby indicator

The status of the DSP3300 is shown by a green standby indicator on the back panel.

Status Description

Dimly illuminated Speaker in standby

Brightly illuminated Speaker operating

The speakers are switched on or into standby as appropriate via the SpeakerLink connections by the Meridian system they are connected to.

Applications

To connect a pair of DSP3300s to a Meridian Audio Core 200

The DSP3300s are ideal for a compact Audio Core 200 based system.

- Connect the lower SpeakerLink output on the Audio Core 200 to the Master DSP3300, using a Meridian SpeakerLink lead.

• Connect the upper SpeakerLink output on the Audio Core 200 to the Slave DSP3300, using a Meridian SpeakerLink lead.
• Make sure the Channel selector is set to the L/C position on the back of the left speaker and to the R position on the back of the right speaker.

graph LR
    A["DSP3300 – Slave"] --> B["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    B --> C["SpeakerLink lead"]
    D["Meridian Audio Core 200"] --> E["SPEAKERLINK IN OUT"]
    E --> F["SpeakerLink lead"]
    G["DSP3300 – Master"] --> H["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    H --> I["SpeakerLink lead"]

To use a DSP3300 as the centre speaker in a Meridian Digital Theatre

The DSP3300 is ideal as the centre loudspeaker in a Meridian Digital Theatre, in combination with DSP3200 or DSP3300 front and rear loudspeakers and a DSW subwoofer. The system can be controlled by a Meridian Digital Surround Controller such as the G68. The following diagram shows how to connect the speakers using "home run" wiring.

• Connect the L+R SpeakerLink output on the lower row of the G68 to the Master digital speaker (here the front left speaker), using a Meridian SpeakerLink lead.

• Connect the appropriate SpeakerLink outputs on the G68 to each of the remaining speakers and the subwoofer, using Meridian SpeakerLink leads.

• Set the Channel selector on the front and rear left speakers to the L/C position, and on the front and rear right speakers to the R position.

• Set the Channel selector on the centre speaker to the L/C position, and on the DSW subwoofer to the 2 position.

Alternatively you can connect the speakers using "daisy chain" wiring: connect the front and rear L speakers to the G68, and then link each pair of speakers together by connecting the output from the L speaker to the input of the R speaker. Likewise connect the centre speaker to the G68, and then link the output from the centre speaker to the input of the subwoofer.

Note that if the system includes DSP loudspeakers with displays, such as the DSP5200, one of them must be set up as the master in the system.

graph TD
    A["DSP3200 – Rear R"] -->|SpeakerLink| B["Meridian Surround Controller"]
    C["DSP3200 – Rear L"] -->|SpeakerLink| D["Meridian Surround Controller"]
    E["DSP3200 – Front R"] -->|SpeakerLink| F["DSP3300 – Centre"]
    G["DSP3200 – Front L (Master)"] -->|SpeakerLink| H["DSW – Subwoofer"]
    I["DSP3200 – Rear R"] -->|SpeakerLink| J["Meridian Surround Controller"]
    K["DSP3200 – Rear L"] -->|SpeakerLink| L["Meridian Surround Controller"]
    M["DSP3200 – Front R"] -->|SpeakerLink| N["Meridian SpeakerLink INPUT OUTPUT"]
    O["DSP3200 – Front L (Master)"] -->|SpeakerLink| P["Meridian SpeakerLink INPUT OUTPUT"]
    Q["DSP3200 – Rear R"] -->|SpeakerLink| R["Meridian SpeakerLink INPUT OUTPUT"]
    S["DSP3200 – Rear L"] -->|SpeakerLink| T["Meridian SpeakerLink INPUT OUTPUT"]
    U["DSP3200 – Front R"] --> V["Meridian SpeakerLink INPUT OUTPUT"]
    W["DSP3200 – Front L (Master)"] --> X["Meridian SpeakerLink INPUT OUTPUT"]

To create a stand-alone Sooloos system

The DSP3300s can be connected directly to a Meridian Media Core 200 to make an ideal compact Sooloos system.

You can browse and control music on the system using the Sooloos application on an iPad, iPhone, or iPod Touch, or the Control:PC/Control:Mac application on a computer.

- Connect the Network socket on the Media Core 200 to one of the LAN network connections on your Router, using a CAT5 cable.

• Make sure the WAN/Internet port on the Router is connected to the rest of your network, or to your Cable/DSL Modem.
• Connect the SpeakerLink output on the Media Core 200 to the Master DSP3300 SpeakerLink input, using a Meridian SpeakerLink lead.
• Connect the SpeakerLink output from the Master DSP3300 to the SpeakerLink input of the Slave DSP3300, using a Meridian SpeakerLink lead.

For information on configuring your Media Core 200 please refer to the Media Core 200 User Guide.

graph TD
    A["DSP3300 – Slave"] -->|SpeakerLink lead| B["MERIDIAN SPEAKERLINK INPUT OUTPUT"]
    B --> C["Router"]
    C -->|Internet| D["Network"]
    D --> E["SPEAKERLINK OUT"]
    E --> F["Media Core 200"]
    F --> G["DSP3300 – Master"]
    G -->|SpeakerLink lead| H["MERIDIAN SPEAKERLINK INPUT OUTPUT"]