DSP750 - Loudspeaker MERIDIAN - Free user manual and instructions
Find the device manual for free DSP750 MERIDIAN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Active DSP Loudspeaker |
| Dimensions (H x W x D) | 380 x 220 x 300 mm |
| Weight | 12 kg (26.5 lbs) |
| Power Output | 150W per channel (RMS) |
| Frequency Response | 40 Hz – 20 kHz (±3 dB) |
| Drivers | 1″ tweeter, 6.5″ mid/bass |
| Inputs | Digital coaxial, optical, AES/EBU; analog RCA |
| Digital Signal Processing | Proprietary 24-bit/96 kHz DSP with crossover and correction |
| Room Correction | Built-in automated room equalization |
| Presets | Multiple listening modes (Music, Movie, Night) |
| Connectivity | Meridian Comms for system integration |
| Mains Voltage | 100-240 V AC, 50/60 Hz |
| Power Consumption | 20 W idle, 200 W max |
| Standby Power | < 0.5 W |
| Cleaning | Wipe with soft dry cloth; do not use cleaners or water |
| Safety | Do not expose to rain or moisture; no user-serviceable parts |
| Spare Parts | Contact Meridian dealer for service and replacement parts |
| Repair | Refer to qualified service personnel only |
Frequently Asked Questions - DSP750 MERIDIAN
How do I connect the DSP750 to my source?
Use the digital coaxial or optical input for best performance. Connect your source’s digital output to the corresponding input on the loudspeaker. For analog sources, use the RCA input.
Can I use the DSP750 as a surround speaker?
Yes, when paired with a Meridian processor, the DSP750 can be configured as a surround channel via the Meridian Comms network.
How do I perform room correction?
Access the setup menu via the remote or front panel. Select 'Room Correction' and follow the on-screen instructions to run the automated calibration.
What do the LED lights indicate?
Green indicates normal operation. Amber means standby. Flashing red signals a fault – consult the manual.
Can I adjust the bass and treble?
Yes, use the remote or front panel to access tone controls. Settings are stored per input.
Why is there no sound?
Check that the speaker is powered on, the correct input is selected, and the source is playing. Also verify mute is off and volume is not at minimum.
How do I clean the loudspeaker?
Use a soft, dry microfiber cloth. Do not apply any liquids or abrasives. For grille cleaning, gently vacuum with a brush attachment.
Can I bi-wire the DSP750?
No, the DSP750 is an active loudspeaker with built-in amplification, so it has only power and signal inputs. Bi-wiring is not applicable.
What is the warranty period?
Meridian typically offers a 2-year limited warranty. Check your purchase documentation for exact coverage.
How do I update the firmware?
Connect the RS232 port or use the Meridian Configuration software (available from their website). Follow the update instructions carefully.
User questions about DSP750 MERIDIAN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual DSP750 - MERIDIAN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DSP750 by MERIDIAN.
USER MANUAL DSP750 MERIDIAN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MERIDIAN
Model : DSP750
Category : Loudspeaker