DSP730 - Loudspeaker MERIDIAN - Free user manual and instructions
Find the device manual for free DSP730 MERIDIAN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Active Digital Floorstanding Loudspeaker |
| Brand | Meridian |
| Model | DSP730 |
| Frequency Response | 35 Hz – 20 kHz (±3 dB) |
| Built-in Amplifier Power | 2 x 200 W RMS |
| Crossover | Digital active crossover |
| Drive Units | 1 x 25 mm tweeter, 2 x 165 mm bass drivers |
| Enclosure Type | Bass-reflex, floorstanding |
| Inputs | Digital (S/PDIF), analog (RCA) via optional input module |
| Dimensions (H x W x D) | 1000 x 220 x 320 mm |
| Weight | 35 kg per speaker |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Finish Options | Black Ash, Cherry, other wood veneers |
| Signal Processing | Digital signal processing, phase and time alignment |
| Standby Power | Less than 0.5 W when in standby |
| Cleaning | Wipe with a soft, dry cloth; do not use solvents |
| Safety | Do not open the cabinet; no user-serviceable parts inside |
| Spare Parts | Available through authorized Meridian dealers |
| Repair Service | Contact a certified Meridian service center |
| Warranty | 2 years from date of purchase (subject to conditions) |
Frequently Asked Questions - DSP730 MERIDIAN
How do I connect my DSP730 speakers to my audio system?
Use the digital inputs on the back of the speaker for best performance. Connect them to a Meridian digital source or a preamp with digital output. For analog sources, use the optional analog input module.
Can I place the DSP730 speakers near a wall?
The DSP730 loudspeakers are bass-reflex floorstanding models. For optimal bass response, leave at least 20 cm between the back of the speaker and the wall, and avoid placing them directly in corners.
How do I clean my Meridian DSP730 loudspeakers?
Wipe the cabinet with a soft, dry cloth. If needed, slightly dampen the cloth with water and mild soap. Never use abrasive cleaners, alcohol, or solvents as they may damage the finish.
Why is there no sound coming from my DSP730?
Check that the speakers are powered on and the standby LED is lit. Verify the input source and cable connections. Ensure the volume on your source is turned up. If the problem persists, try a different input or cable.
Is the DSP730 a wireless speaker?
No, the DSP730 is a wired active loudspeaker. It requires a digital or analog audio connection from your source. Wireless operation can be achieved with an additional wireless adapter.
Can I bi-wire or bi-amp the DSP730?
The DSP730 has built-in amplifiers for each driver, so external bi-wiring or bi-amping is not necessary or possible. The speaker accepts either digital or analog signals and processes them internally.
What is the recommended amplifier power for the DSP730?
The DSP730 is an active speaker, meaning it has built-in amplifiers. No external amplifier is required. Simply connect a preamp, source, or integrated unit with a digital output.
How do I update the firmware on my DSP730?
The DSP730 features a digital signal processor that can be updated via the input connection. Contact your Meridian dealer for the latest firmware and update instructions.
What is the power consumption of the DSP730 in standby mode?
In standby mode, the DSP730 consumes less than 0.5 watts, making it energy efficient while keeping the internal circuits ready for immediate response.
Where can I find the serial number of my DSP730?
The serial number is printed on a label on the back of the speaker, near the power and input connectors. Keep this number for warranty and service purposes.
User questions about DSP730 MERIDIAN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual DSP730 - MERIDIAN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DSP730 by MERIDIAN.