BC DH05 - Rear Camera BLAUPUNKT - Free user manual and instructions

Product Type	Rear View Camera
Brand	Blaupunkt
Model	BC DH05
Image Sensor	CMOS
Resolution	720x480 pixels (NTSC)
Viewing Angle	120° (diagonal)
Night Vision	Yes, infrared LEDs
Video Output	Composite RCA (1.0Vp-p, 75Ω)
Power Supply	12V DC
Current Consumption	≤ 150mA
Dimensions (approx.)	50 x 30 x 30 mm
Weight (approx.)	50 g
Waterproof Rating	IP67
Operating Temperature	-20°C to +70°C
Mounting Type	Surface mount / license plate mount
Guide Lines	Adjustable parking guide lines
Mirror Image	Yes, switchable
Compatibility	Works with most monitors and head units with RCA input
Cleaning	Wipe with soft, damp cloth; avoid abrasive cleaners
Safety	Use only with 12V systems; disconnect battery during installation
Spare Parts	Contact Blaupunkt service center for replacement

Frequently Asked Questions - BC DH05 BLAUPUNKT

Can I use this camera without a monitor?

No, the BC DH05 requires a compatible monitor or head unit with a composite video input (RCA) to display the image.

Is the camera compatible with all Blaupunkt car stereos?

Most Blaupunkt head units with video input are compatible. Check your stereo's specifications for a rear camera input (RCA).

What is the waterproof rating?

The camera is rated IP67, meaning it is dust-tight and can withstand immersion in up to 1 meter of water for 30 minutes.

How do I connect the camera to power?

Connect the red wire to a 12V power source (e.g., reverse light positive), black wire to ground. The camera activates when reverse gear is engaged.

Can I adjust the viewing angle?

The camera has a fixed 120° wide-angle lens. You can tilt the camera slightly during installation to aim it correctly.

Does the camera have night vision?

Yes, it includes built-in infrared LEDs for clear vision in low-light or dark conditions.

How do I enable parking guide lines?

Guide lines can be toggled via a physical switch on the camera cable or through the connected monitor if supported.

What should I do if the image is upside down?

The camera has a mirror/reverse switch on the cable. Flip it to correct the orientation for your mounting position.

Can I replace the camera if damaged?

Yes, you can purchase a replacement BC DH05 from authorized Blaupunkt dealers. Dispose of the old unit according to local electronics waste regulations.

How do I clean the camera lens?

Use a soft, lint-free cloth slightly dampened with water or mild soap. Avoid harsh chemicals that could damage the lens coating.

USER MANUAL BC DH05 BLAUPUNKT

Two black camera lens components with visible lens and cable, shown from different angles (no text or symbols)

Enjoy it.

Installation Diagram

graph TD
    A["6M Video wire"] --> B["Control wire"]
    B --> C["Camera input"]
    C --> D["Reversing detection"]
    D --> E["DVD"]
    F["1.5M Power wire"] --> G["Control wire"]
    G --> H["Reversing lights-"]
    H --> I["Reversing lights+"]
    I --> J["0.7M Conversion wire"]
    J --> K["Camera"]

Ground the wire through the exterior body of the vehicle and keep connection intact.

Attention

• Remove protective film from camera lens before use.
  • Take extra precautions when setting up the connection near petrol tank and wires.
• Please connect Red Wire with reverse light.

SPECIFICATION

• Power Supply : DC12V±3V
• Current Consumption : 50mA
• Resolution : 600 TVL
• Optical Format : 1/3"
• Image Sensor : CMOS
• Eective Pixels : 1080 x 720
- Lens Angle: 170^ (D), 120^ (H), 100^ (V)
• Electronic Shutter : 1/60

• \~ 1/100000 sec
- White Balance : Auto
• Humidity : up to 95%
• Water Proof : Yes
- Illumination Min.: 0.1 Lux
• TV System : PAL/NTSC
• Operation Temperature : -20°C \~ +70°C
• Storage Temperature: -20^ +70^

Disclaimer

In no event shall Blaupunkt be liable for any direct, indirect, punitive, incidental, special consequential damages, to property or life, improper storage, whatsoever arising out of or connected with the use or misuse of our products.

USA & CANADA : Product no intended for sale in the United States and Canada. If purchased in the U.S. or Canada, this product is purchased as-is.

No warranty, express or implied is provided in the U.S. and Canada.

1. Installation Locations

1.1 At tail light (with metal bracket)

i. Remove one side of the reverse light socket from its housing then remove the bulb from its socket

ii. Connect the reverse light power cable to the camera, screwn the housing & camera back into position with a screwdriver

1.2 At hatch handle (with metal bracket)

i. Use a screwdriver to remove the original hatch handle

ii. Mount the camera where the original hatch handle used to be

1.3 On the car bumper

i. Remove the rotating mount before installation. Drill an access hole for the camera cables

ii. Mount the camera onto the acces hole & secure it in position with 3M tape/ screws

Pictures are for illustration purpose only, see actual vehicle for accurate installation location.

TROUBLESHOOTING
Problem	Solution
Display monitor / car radio does not show reverse view when reversing	Examine if the viewing mode is set to correct reverse view
Display monitor / car radio does not show reverse view even after correcting the view setting	Restart the display monitor / car radio
Reverse view does not show even after restarting the display monitor/ car radio	Examine if the power supplies of the reverse light or the rear car plate light is properly connected
Reverse view does not show even though power supplies of the reverse light or the rear car plate light is properly connected	Examine if the power supply cables of the reverse light or the rear car plate light is damaged. Repair/replace if the cables are damaged

Blaupunkt India Private Limited

47, Atlanta Society, Nariman Point

Mumbai- 400 021. Maharashtra. India.

www.blaupunkt.com