OM-200 - Scale AWS - Free user manual and instructions

Product Type	Digital Scale
Brand	AWS
Model	OM-200
Capacity	200 g / 0.5 oz
Readability	0.01 g / 0.001 oz
Display	LCD, backlit
Power Source	2 x AAA batteries (included)
Auto-off	After 2 minutes of inactivity
Tare Function	Yes
Units	g, oz, ct, ozt, gn, dwt, tl
Calibration	External calibration with weight
Platform Material	Stainless steel
Dimensions	12 cm x 8 cm x 2 cm
Weight	200 g (without batteries)
Operating Temperature	10°C to 40°C
Cleaning	Wipe with a damp cloth; do not immerse
Safety	Do not overload; keep away from water
Accessories Included	Batteries, calibration weight (optional)

Frequently Asked Questions - OM-200 AWS

How do I calibrate the AWS OM-200 scale?

Calibration requires a known weight (e.g., 100g). Press and hold the CAL button until display shows CAL. Place the weight, then wait for calibration to finish. Use a clean, level surface.

What batteries does the scale use?

The scale uses 2 AAA batteries. When the battery symbol appears, replace them promptly to ensure accuracy.

Can I measure liquids on this scale?

Yes, but use a container and the tare function to zero out the container weight. Avoid spilling liquids onto the scale.

Why does the scale display 'Err' or 'Overload'?

This indicates the item exceeds the scale's capacity (200g). Remove the item immediately to prevent damage. Overload can affect accuracy.

How accurate is the AWS OM-200?

The scale has a readability of 0.01g and is accurate within ±0.02g when properly calibrated and used on a stable surface.

What units can I switch between?

Press the MODE button to cycle through g, oz, ct, ozt, gn, dwt, and tl. The selected unit appears on the display.

Is the platform removable for cleaning?

The stainless steel platform is not designed to be removed. Wipe it gently with a damp cloth. Do not use abrasive cleaners.

How do I use the tare function?

Place an empty container on the scale, then press the TARE button. The display resets to zero. Add your item; the weight shown is net.

Can I use this scale for jewelry?

Yes, with a readability of 0.01g, it is suitable for small items like coins, gems, or jewelry. Use the included tray for small parts.

What should I do if the display is dim?

Check the batteries. If they are weak, replace them. The backlight may also be turned off; press and hold the LIGHT button (if available) to toggle.

USER MANUAL OM-200 AWS

Black digital kitchen scale with a digital display showing 1.0 mm (no text or symbols on the device itself)

OM-200 (440lb x 0.2lb)

Thank you for purchasing the American Weigh OM-200 digital bathroom scale. Please read all operating instructions carefully before use. Scales are precision measuring devices and should always be handled with proper care. To ensure years of reliable service, keep these simple tips in mind:

• Do not exceed the scale’s maximum capacity. Overloading your scale can permanently damage it!
• Avoid exposure to extreme heat or cold. Scales perform best at normal room temperature. If temperatures have changed dramatically, calibration and adjustment may be necessary.
• Allow your scale to warm up for 30-60 seconds before performing calibration and adjustment(if available).
• Store your scale in a clean, dry location. Dust, dirt, and moisture can accumulate on the weighing sensors and electronics causing inaccuracy or malfunction.
• Avoid using your scale in close proximity to strong radio wave emitting devices such as computers, cash registers, and cordless phones.
  • Always weigh on a flat and level surface, free from vibrations and drafts. The corner of a room is usually the most stable.
  • Gently apply all items to be weighed. Do not drop items onto the weighing platform.
• Avoid dropping your scale. The warranty does not cover damage due to rough treatment or overload.
• Check the batteries first if you are having any trouble with your scale. This simple step can remedy most scale issues.
• Do not disassemble your scale. This product contains no user serviceable parts.

I. Part List

1. Scale
2. CR2032 Battery (x1)

II. Key Description

Bottom of Scale

III. Battery Installation

1. Before using the scale for the first time, check the battery compartment and remove any plastic insulation strips or packaging that may be in place to prevent battery drainage during shipping/storage.
2. If you are replacing the batteries, make sure the positive and negative contacts are properly aligned.

Pure technical diagram of a mechanical component with no text or symbols

Install Positive Side Up

IV. Scale Operation

1. Place the scale on a flat, level surface. Do not weigh on carpet as it may affect the accuracy.
2. Step onto the platform. Once the weight has stabilized, it will be locked on the display for a few seconds.
3. The scale will turn off automatically after 10 seconds of non-use.

NOTES: To prevent slipping, do not use the scale with wet feet. Do not leave items on the scale when not in use. This scale has an Auto-On feature that allows you to step on the scale immediately without having to tap the scale first to zero it. If moving the scale from one place to another, allow the scale to turn on then off once before weighing. This will allow the zero-point to be re-established. Otherwise, the weight result may be inaccurate.

V. Changing the Unit of Measure

1. Press the UNIT key on the bottom of the scale to change the scale's displayed unit of measure.
2. If the scale is turned off then back on, it will default to the last unit used.

- OM-200 Units: kg (Kilogram) lb (Pound) st:lb (UK Stone:Pound)

VI. Specifications

	OM-200
Max. Capacity	b / 200kg / 31st
Readability	0.1kg / 1lb
Power	032
Dimensions	< 11.8 x 0.8”
Display Dimensions	1 x 3.6”
Warranty	r Limited Warranty

American Weigh Scales, Inc.

Norcross, GA 30092, U.S.A

Made in China to our exact specifications and quality control.