AC-100 - Scale AWS - Free user manual and instructions
Find the device manual for free AC-100 AWS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Scale |
| Brand | AWS |
| Model | AC-100 |
| Category | Scale |
| Display Type | LCD |
| Weight Capacity | 100 g |
| Readability | 0.01 g |
| Units of Measurement | g, oz, ct, dwt |
| Tare Function | Yes |
| Auto-Off | Yes (adjustable) |
| Calibration | External calibration weight required |
| Power Source | 2 x AAA batteries (included) |
| Battery Life | Approximately 50 hours continuous use |
| Platform Material | Stainless steel |
| Platform Size | 60 mm diameter |
| Overall Dimensions | 120 x 100 x 20 mm |
| Net Weight | 150 g |
| Overload Protection | Yes |
| Low Battery Indicator | Yes |
| Operating Temperature | 10°C - 30°C |
| Warranty | 1 year limited |
| Cleaning Instructions | Wipe with damp cloth; do not submerge |
Frequently Asked Questions - AC-100 AWS
How do I calibrate the AWS AC-100 scale?
To calibrate, press and hold the MODE key until 'CAL' appears. Place the required calibration weight (usually 50g or 100g) on the platform. The scale will auto-calibrate. Use a certified weight for accurate results.
What type of batteries does the AC-100 use?
It uses two AAA batteries. Open the battery compartment on the bottom. Ensure proper polarity as indicated. Replace when the low battery icon appears.
Why does the scale show 'Err' or 'LO'?
'Err' generally indicates an overload or unstable reading. Remove weight and restart. 'LO' means low battery; replace batteries. If problem persists, recalibrate the scale.
How do I clean the scale?
Use a soft, damp cloth with mild soap. Do not immerse in water or use abrasive cleaners. Dry immediately. Avoid solvents or chemicals that may damage the surface.
What is the maximum weight capacity?
The AC-100 has a maximum capacity of 100g. Exceeding this may cause permanent damage. Overload protection is built-in, but avoid overloading.
How do I switch between weight units?
Press the MODE button repeatedly to cycle through units: g, oz, ct, dwt. The display will show the current unit. Select the desired unit and wait for stabilization.
Does the scale have an auto-off feature?
Yes, the scale turns off after a period of inactivity to save battery. The default is 3 minutes. This can be adjusted via settings or by pressing and holding the TARE button during startup.
Can I weigh items directly on the scale?
Yes, place items directly on the stainless steel platform. For powders or liquids, use a container and use the tare function to zero out the container weight.
Why is the scale reading unstable?
Unstable readings can be caused by vibrations, air currents, or an uneven surface. Place the scale on a stable, level table. Ensure no drafts from fans or open windows.
How do I replace the batteries?
Slide the battery cover off the bottom. Remove old batteries and insert new AAA batteries with correct polarity. Close the cover. Dispose of old batteries according to local regulations.
User questions about AC-100 AWS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Scale in PDF format for free! Find your manual AC-100 - AWS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AC-100 by AWS.
USER MANUAL AC-100 AWS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AWS
Model : AC-100
Category : Scale