Vader - Tent Zempire - Free user manual and instructions

Product Type	Tent
Brand	Zempire
Model	Vader
Capacity	2-person
Dimensions (Interior)	210 cm x 120 cm x 100 cm (L x W x H)
Packed Size	50 cm x 20 cm x 20 cm
Weight	3.5 kg
Material - Flysheet	Polyester 190T with PU coating
Material - Inner tent	Breathable polyester mesh
Material - Floor	Polyethylene, welded seams
Poles	Aluminum alloy, 2 sections
Waterproof Rating	3000 mm
Setup Type	Dome, freestanding
Ventilation	Mesh windows and roof vent
Pockets	2 interior mesh pockets
Number of Doors	1
Pegs Included	Yes, 8 steel pegs
Guy Lines	4 reflective guy lines
Carry Bag	Included, with compression straps
Recommended Use	Camping, festival, backpacking

Frequently Asked Questions - Vader Zempire

How do I set up the Zempire Vader tent?

Lay out the tent, assemble the poles, insert them into the sleeves, and secure the flysheet. Detailed instructions are in the manual.

Is the tent waterproof?

Yes, the flysheet has a 3000 mm PU coating and the floor has welded seams to prevent water ingress.

What is the weight of the Vader tent?

The tent weighs approximately 3.5 kg, making it suitable for car camping and short hikes.

How many people does it sleep?

It is a 2-person tent, ideal for couples or solo campers with extra gear.

Can I use the tent in windy conditions?

Yes, the dome shape and reflective guy lines help stabilize it. Ensure pegs are fully secured.

How do I clean and maintain the tent?

Clean with mild soap and water, dry thoroughly before storage. Avoid machine washing. Store in a cool dry place.

Are spare parts available?

Spare poles, pegs, and guy lines can be ordered from Zempire or authorized dealers. Contact support for specific parts.

Does the tent have storage pockets?

Yes, it includes 2 interior mesh pockets for small items like phones and headlamps.

What is the packed size?

The packed size is approximately 50 cm x 20 cm x 20 cm, fitting in a standard car trunk.

Can I use the tent in hot weather?

Yes, the mesh windows and roof vent provide good ventilation to reduce condensation and heat.

USER MANUAL Vader Zempire

1. Clear your site making sure there are no sharp objects where you are going to pitch your tent. Try to get a site that is as flat as possible. Spread out the inner tent, the round door is located at the front.

1. Assemble the 4 pole sections. Ensure that the poles do not snap together.

2. Thread the RED poles through the pole sleeves that run diagonally across the centre of the tent. Insert the ends of the poles into the eyelets located below each pole sleeve.

1. Insert the end of each of the short BLACK poles into the eyelets above the door and the rear window. Attach the C clips above the side window.

1. Peg out the four corners of the inner tent. The peg points should be pegged through the webbing loop rather than the eyelet.

Diagram of a dome-like structure with internal lines and red markers, no text or symbols present

3D diagram of a folded structure with arrows indicating rotation, showing no text or symbols

1. Attached the base of the fly by connecting the SR buckles at each corner of the tent. Peg the remaining elastic peg loops.

2. Pull the fly over the inner tent. The Freedom Logo should be at the front of the tent. Connect the velcro loops inside the fly around the cut outs on the corresponding pole sleeve.

3D illustration of a simple camping tent with red cables extending from the side (no text or symbols)

1. It is recommended that guy ropes are pegged out at all times and windows are opened whenever possible to allow adequate ventilation.

Insert pegs at a 45^ angle

PITCHING INSTRUCTIONS - VADER

1. Ensure guy ropes are pegged out at all times during use
2. Never pack your tent away wet. If you must take your tent down when wet, ensure that you dry you tent completely as soon as possible to prevent mildew forming.
3. If mildew does form on your tent wash off pours with warm water and a soft brush to prevent further growth. Do not use detergents.
4. Do not use an open flame inside your tent. The fabric has been treated with a fire retardant but is in no way fire proof
5. Clean all pegs and poles before storing

Freedom zempire

Freedom Zempire is proud to be a 100% New Zealand owned and operated business.

For more information about this and other great products we offer please visit our website.

airflowseries

VADER

pitching

instructions