10AAO-4 - Electronic board Daytronic - Free user manual and instructions

Product Type	Analog Output Module
Brand	Daytronic
Model	10AAO-4
Number of Channels	4
Output Type	Voltage or Current (selectable)
Output Voltage Range	±10 V
Output Current Range	0/4-20 mA
Resolution	16 bits
Update Rate	Up to 1000 updates/second per channel
Communication Interface	Ethernet, USB, or RS-485 (depending on configuration)
Power Supply	24 VDC, 500 mA
Dimensions (W x H x D)	105 x 30 x 110 mm
Weight	0.2 kg
Operating Temperature	0°C to 50°C
Storage Temperature	-20°C to 60°C
Humidity Range	10% to 90% non-condensing
Main Functions	Analog output generation, signal conditioning, waveform generation
Maintenance	Periodic cleaning with dry cloth; avoid solvents
Safety	Overvoltage protection, short-circuit protection per channel
Spare Parts and Repairability	Individual channel modules replaceable; calibration service available
Warranty	1 year limited warranty

Frequently Asked Questions - 10AAO-4 Daytronic

How do I connect the 10AAO-4 to my PC?

Use the provided USB cable or Ethernet connection. Install the Daytronic DAQ software for configuration.

What is the output range of the 10AAO-4?

Each channel can output ±10 V or 0/4-20 mA, selectable via software.

Can I use the 10AAO-4 for closed-loop control?

Yes, with an external sensor and controller. The module provides high-speed analog outputs for real-time control.

How many channels does the 10AAO-4 have?

It has 4 analog output channels, each independently configurable.

What software is compatible with the 10AAO-4?

It is compatible with Daytronic DAQ software, LabVIEW, and custom applications via DLL.

Is the 10AAO-4 suitable for industrial environments?

Yes, it has a rugged metal enclosure and wide temperature range (0°C to 50°C).

How do I calibrate the 10AAO-4?

Use the calibration utility in the Daytronic software. A precision multimeter is required for verification.

Can I daisy-chain multiple 10AAO-4 modules?

Yes, via Ethernet or RS-485. Each module is assigned a unique ID in the software.

What is the power supply requirement?

It requires a 24 VDC power supply with at least 500 mA capacity (not included).

How do I update the firmware?

Download the latest firmware from Daytronic's website and use the firmware update tool in the software.

USER MANUAL 10AAO-4 Daytronic

Close-up of a green printed circuit board with blue and orange components (no visible text or symbols)

FOUR CHANNEL ANALOG OUTPUT BUFFER CARD

For use in System 10 ..... The Model 10AAO-4 is used for the purposes of "real-time" monitoring, the Model 10AAO-4 provides continuous buffering, filtering, and fixed gain of 1, 2, or 4 for up to four individual System 10 analog signals. Each signal may originate from any one of the system's Conditioner Cards that provides "Auxiliary Output" to wirewrap pins.* The actual gain setting for each output will depend on the "TYPE" designation of the corresponding "source" conditioner channel. Each of the 10AAO-4's four outputs is nominal ±5V-DC (±6 V maximum), with a minimum load resistance of 2 k ^1/2 . Each output is factory-set for a "single-ended" configuration (i.e., output referenced to Signal Common (Ground)). If desired, however, all four outputs may be reconfigured as "floating," by connecting an external supply of ±9 V-DC, furnished by the user. Each 10AAO-4 channel contains a 3-pole modified Butterworth filter with a bandwidth of 47 Hz. In addition, individual ZERO and SPAN controls are accessible at the front of the card, for further calibration or scaling of a given channel with reference to its "source" input.

* Cards without "Auxiliary Output" currently include the Models 10A9-8C, 10A10-4, 10A15-8, 10A35, 10A62-8C, 10A64-8C, 10A65-8, and 10A69-4. None of these cards may be directly connected to the Model 10AAO-4 without special modification.