SA9660N - Heating DCG - Free user manual and instructions

Product Type	Fan Heater
Brand	DCG
Model	SA9660N
Power Consumption	900W
Voltage	220-240V~
Frequency	50/60Hz
Safety Device	Tilt switch (auto shut-off when tipped)
Oscillation	Yes, with on/off switch
Assembly Required	Base plate attachment with screws
Cleaning	External cleaning with damp cloth; do not use solvents
Placement	On flat, stable surface
Usage	Indoor domestic use only
Warning	Do not cover the heater
Warning	Do not place immediately below socket outlet
Warning	Not for use near bath, shower, or swimming pool
Controls	Manual switches for speed and oscillation
Power Cord	Standard; must be replaced by authorized service
Grille Maintenance	Clean grilles from dust regularly
Intended Use	Heating for domestic use

Frequently Asked Questions - SA9660N DCG

How do I assemble the DCG SA9660N heater?

First, remove the mounting screw from the lower part of the body. Insert the power cord through the slot in the base plate. Attach the body to the base plate and secure it with the two mounting screws. Finally, fix the power cord with the clamp.

How should I clean the heater?

Always unplug the heater and let it cool before cleaning. Use a damp cloth to wipe the exterior. Clean the grilles from dust. Do not use abrasive powders or solvents on painted parts.

What safety features does the SA9660N have?

The heater is equipped with a tilt switch that automatically disconnects the appliance if it is tipped over. This prevents accidents and overheating.

Can I use this heater in a bathroom?

No, the heater must not be used in the immediate surroundings of a bath, shower, or swimming pool. It is intended for indoor domestic use only on dry surfaces.

How do I turn on the oscillation function?

Press the oscillation switch on the heater to start the oscillating movement. Press it again to stop the oscillation. The switch is clearly labeled.

What is the power consumption of this heater?

The DCG SA9660N has a power consumption of 900W at 220-240V~ and 50/60Hz. Ensure your circuit can handle at least 10 amperes.

Is it safe to cover the heater?

No, never cover the heater while it is operating. Doing so can cause overheating and pose a fire risk. The manual explicitly warns: 'In order to avoid overheating, do not cover the heater.'

What voltage does the heater require?

The heater operates on 220-240V~ with a frequency of 50/60Hz. Check that your electrical supply matches these specifications before plugging in.

Can I leave the heater unattended?

It is not recommended to leave the heater unattended, especially in rooms occupied by persons who cannot leave on their own. The manual states that constant supervision is required in such cases.

How do I replace a damaged power cord?

If the power cord is damaged, it must be replaced by the manufacturer's after-sales service or a similarly qualified person to avoid hazards. Do not attempt to repair it yourself.

USER MANUAL SA9660N DCG

Exterior view of a DCG air conditioner fan with red rim and black mesh grille, mounted on a stand (no text or symbols visible)

CARATTERISTICHE TECNICHE

220-240V\~ 50/60Hz 900W

Gentile cliente,

We thank you very much for having purchased one product of ours.

We kindly ask you to read and save this instruction manual.

CAUTION

Remove the packing and make sure that the appliance is intact. In case of doubt do not use the appliance and contact our after-sales service. Do not leave packaging materials like bags and staples within reach of children.

Before switching on appliance check if the electrical voltage and frequency of the circuit correspond to those indicated on the appliance.

The appliance has to be connected to a circuit according to the rules in force concerning the civil plant. The plant has to be related to the nominal power of the appliance and has to be provided with an earth-wire.

Use the appliance only for the mentioned purpose, namely as a heater for domestic use.

Do not use it for any other application, as it could get dangerous.

The manufacturer is not responsible for any eventual damages caused by improper or faulty use.

The use of every electrical appliance calls for the awareness of some basic rules such as

Never touch the appliance with wet or dump hands or feet.

Never expose the appliance to atmospheric conditions (rain. sun .etc).

The appliance must be always placed on a flat and stable surface.

Switch the appliance off and unplug it before cleaning.

When the appliance is not in use switch it off and unplug it. Make

harmless the parts of the appliance, which could be handled hazardously by children for playing.

Do not use this heater in the immediate surroundings of both, a shower or a swimming pool.

Do not put the cable on the appliance when it is still warm.

A correct operation of the appliance is obtained when the heater is installed vertically. Do not switch on the heater near, pieces of furniture, curtains, and shelves. Etc.

Do not use the appliance near liquids or inflammable matters.

Do not locate the heater below a socket outlet.

Do not cover the appliance when it is running to avoid overheating risks.

In case the power cord is damaged send it to the nearest after-sale service recommended by the manufacturer for the replacement.

Do not connect the appliance to extension cords or multiple outlets. Do not damage and do not kink the power cord. Before cleaning the appliance or carrying out any maintenance switch off the whole system.

If the appliance is out of work switch it off without tampering it. If any repair is required please contact only the after-sale centers approved by the manufacturer and ask for original spare parts. Otherwise safety of the appliance can be compromised.

ASSEMBLY

Assemble the body frame and the base plate together as the following sequences. Remove the mounting screw from the lower part of the body frame.

Insert the power cord through the slot placed in the middle part of the basement and then assemble the body frame to the base plate. Secure the body frame to the base plate by means of the two mounting screw previously removed. Insert the power cord through the suitable slots and then fix it by the clamp.

OPERATION

Plug in the appliance. Check that the outlet has at least a 10-AMPERE current carrying capacity.

Models with switches

Select the speed by suitable switches. Press the oscillating switch to make the heater oscillate. Press it again to switch off the oscillating movement of the appliance.

The heater can be activated manually by pressing the handle situated in the rear part of the appliance.

SAFETY DEVICE

This appliance is provided with one safety device, the safety device disconnects the appliance when the heater is tilted or when is tipped by means of a switch situated in the lower part of the heater.

MAINTENANCE

The appliance needs only an external regular cleaning.

After use and before cleaning always unplug the appliance and wait till the item is cool

Clean the grilles from dust.

Do not clean the painted parts with emery flour or solvents and use only a moistened cloth.

WARNING

1. Heater may not be placed directly below the socket.
2. Heater may not use program, controller, timers or other device to automatically connect heater.
3. If soft power line damage, in order to its maintenance department to replace a similar sector professionals.
4. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

1. Children should be supervised to ensure that they do not play with the appliance.
2. The instructions for heaters marked "Do not cover" or with the "Do not cover" symbol shall contain the substance of the following:
   WARNING: In order to avoid overheating, do not cover the heater.
3. The instructions shall state that the heater must not be located immediately below a socket outlet.
4. This heater is not allowed to take their leave the room, then please don't use this heater in the room, unless the provision of ongoing care of these people.
5. This heater is not equipped with a device to control the room temperature. Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own unless constant supervision provided.
6. Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.

Symbol of a trash bin crossed with a diagonal line, no text or numbers present