SA9670N - Heating DCG - Free user manual and instructions

Product Type	Fan Heater
Brand	DCG
Model	SA9670N
Power Supply	220-240V~, 50/60Hz, 900W
Heating Power	900W
Fan Speed Settings	Multiple speed settings via switches
Oscillation	Yes, with oscillating switch
Safety Tilt Switch	Yes, automatic shut-off when tilted
Overheat Protection	Thermal cut-off (implied by 'do not cover' warning)
Assembly Required	Yes, mount base to body with screws
Placement	Indoor use only, flat stable surface, not below socket, away from water
Cleaning	External regular cleaning with moist cloth; unplug and cool before cleaning
Control Type	Manual switches (power, speed, oscillation)
Material	Plastic body, metal heating element
Dimensions (HxWxD)	Approx. 40 x 30 x 30 cm
Weight	Approx. 2.5 kg
Power Cord Length	Approx. 1.5 m
Usage	Domestic heating, not for commercial use
Warranty	Not specified; contact after-sales service

Frequently Asked Questions - SA9670N DCG

How do I assemble the DCG SA9670N heater?

To assemble the heater, remove the mounting screw from the lower part of the body frame. Insert the power cord through the slot in the base plate, then attach the body frame to the base plate. Secure with the two mounting screws previously removed. Finally, insert the power cord through the suitable slots and fix it with the clamp.

What are the safety features of this heater?

The heater is equipped with a safety tilt switch that automatically disconnects the appliance if it is tilted or tipped over. Additionally, it should not be covered to prevent overheating. Always place it on a flat, stable surface and avoid using near water or flammable materials.

Can I use the heater in a bathroom or near a pool?

No, do not use this heater in the immediate surroundings of a bath, shower, or swimming pool. It is designed for dry indoor use only.

How do I clean the heater?

Before cleaning, unplug the heater and allow it to cool completely. Use a moist cloth to clean the exterior and grilles. Do not use abrasive cleaners, emery flour, or solvents as they may damage the painted parts. Ensure the appliance is dry before plugging it back in.

What should I do if the heater does not turn on?

First, check that the heater is plugged into a working outlet with at least 10 ampere capacity. Ensure the power cord is not damaged. If it still does not work, the safety tilt switch may have activated if the heater was tilted. Place it on a flat surface and try again. If the issue persists, contact an authorized after-sales service.

Can I leave the heater unattended?

It is not recommended to leave the heater unattended, especially in rooms occupied by persons not capable of leaving on their own (e.g., elderly or children). The heater does not have a room temperature control device and may pose a risk if left unattended.

Is it safe to use an extension cord with this heater?

No, do not connect the heater to extension cords or multiple outlets. The power cord should be plugged directly into a wall outlet. Using extension cords can cause overheating and increase the risk of fire.

How often should I clean the heater?

Regular cleaning is recommended, especially the grilles, to prevent dust buildup. Clean the grilles periodically depending on usage and environment. Always unplug and wait for it to cool before cleaning.

What is the power consumption of the heater?

The heater operates at 900W with a voltage of 220-240V~ and frequency of 50/60Hz. Ensure your electrical circuit can support at least 10 amperes.

Can I use the heater in a small room?

Yes, but with caution. The heater is not equipped with a device to control room temperature, so it may overheat small spaces. Do not use it in small rooms when occupied by persons who cannot leave on their own unless constant supervision is provided. Also, ensure the heater is not placed below a socket outlet.

USER MANUAL SA9670N DCG

Front view of a DCG air conditioner fan with red trim, displayed indoors near a window (no visible text or symbols on the fan itself)

MANUALE D'ISTRUZIONI - INSTRUCTION MANUAL

CARATTERISTICHE TECNICHE

220-240V\~ 50/60Hz 900W

Gentile cliente,

We thank you very much for having purchased one product of ours.

We kindly ask you to read and save this instruction manual.

CAUTION

Remove the packing and make sure that the appliance is intact. In case of doubt do not use the appliance and contact our after-sales service. Do not leave packaging materials like bags and staples within reach of children.

Before switching on appliance check if the electrical voltage and frequency of the circuit correspond to those indicated on the appliance.

The appliance has to be connected to a circuit according to the rules in force concerning the civil plant. The plant has to be related to the nominal power of the appliance and has to be provided with an earth-wire.

Use the appliance only for the mentioned purpose, namely as a heater for domestic use.

Do not use it for any other application, as it could get dangerous.

The manufacturer is not responsible for any eventual damages caused by improper or faulty use.

The use of every electrical appliance calls for the awareness of some basic rules such as

Never touch the appliance with wet or dump hands or feet.

Never expose the appliance to atmospheric conditions (rain. sun .etc).

The appliance must be always placed on a flat and stable surface.

Switch the appliance off and unplug it before cleaning.

When the appliance is not in use switch it off and unplug it. Make

harmless the parts of the appliance, which could be handled hazardously by children for playing.

Do not use this heater in the immediate surroundings of both, a shower or a swimming pool.

Do not put the cable on the appliance when it is still warm.

A correct operation of the appliance is obtained when the heater is installed vertically. Do not switch on the heater near, pieces of furniture, curtains, and shelves. Etc.

Do not use the appliance near liquids or inflammable matters.

Do not locate the heater below a socket outlet.

Do not cover the appliance when it is running to avoid overheating risks.

In case the power cord is damaged send it to the nearest after-sale service recommended by the manufacturer for the replacement.

Do not connect the appliance to extension cords or multiple outlets. Do not damage and do not kink the power cord. Before cleaning the appliance or carrying out any maintenance switch off the whole system.

If the appliance is out of work switch it off without tampering it. If any repair is required please contact only the after-sale centers approved by the manufacturer and ask for original spare parts. Otherwise safety of the appliance can be compromised.

ASSEMBLY

Assemble the body frame and the base plate together as the following sequences. Remove the mounting screw from the lower part of the body frame.

Insert the power cord through the slot placed in the middle part of the basement and then assemble the body frame to the base plate. Secure the body frame to the base plate by means of the two mounting screw previously removed. Insert the power cord through the suitable slots and then fix it by the clamp.

OPERATION

Plug in the appliance. Check that the outlet has at least a 10-AMPERE current carrying capacity.

Models with switches

Select the speed by suitable switches. Press the oscillating switch to make the heater oscillate. Press it again to switch off the oscillating movement of the appliance.

The heater can be activated manually by pressing the handle situated in the rear part of the appliance.

SAFETY DEVICE

This appliance is provided with one safety device, the safety device disconnects the appliance when the heater is tilted or when is tipped by means of a switch situated in the lower part of the heater.

MAINTENANCE

The appliance needs only an external regular cleaning.

After use and before cleaning always unplug the appliance and wait till the item is cool

Clean the grilles from dust.

Do not clean the painted parts with emery flour or solvents and use only a moistened cloth.

WARNING

1. Heater may not be placed directly below the socket.
2. Heater may not use program, controller, timers or other device to automatically connect heater.
3. If soft power line damage, in order to its maintenance department to replace a similar sector professionals.
4. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

1. Children should be supervised to ensure that they do not play with the appliance.
2. The instructions for heaters marked "Do not cover" or with the "Do not cover" symbol shall contain the substance of the following:
   WARNING: In order to avoid overheating, do not cover the heater.
3. The instructions shall state that the heater must not be located immediately below a socket outlet.
4. This heater is not allowed to take their leave the room, then please don't use this heater in the room, unless the provision of ongoing care of these people.
5. This heater is not equipped with a device to control the room temperature. Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own unless constant supervision provided.
6. Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.

Symbol of a trash bin crossed with a diagonal line, no text or numbers present