BPDV122 - Camera BLAUPUNKT - Free user manual and instructions

Product Type	Dash Camera
Brand	Blaupunkt
Model	BPDV122
Image Sensor	2.0 MP CMOS
Video Resolution	Full HD 1080p (1920x1080) @ 30fps
Display	2.0 inch LCD
Lens Angle	120° wide angle
Storage	MicroSD card up to 32 GB (Class 10 or higher)
Power Input	DC 5V via USB
Battery	Built-in rechargeable lithium battery, 200 mAh
Night Vision	Yes, with infrared LED
Audio	Built-in microphone and speaker
Mount	Suction cup mount included
Dimensions	Approx. 8 x 5 x 3 cm
Weight	Approx. 100 g
Key Features	Loop recording, G-sensor, Motion detection, Time stamp
Maintenance & Cleaning	Clean lens with soft, dry cloth. Avoid liquids. Store in cool, dry place.
Safety	Do not disassemble. Keep away from children. Use only supplied charger.
Spare Parts & Repairability	Not user-serviceable. Contact Blaupunkt support for repairs.
General Information	Complies with FCC Part 15. Contains chemicals known to cause cancer in California.

Frequently Asked Questions - BPDV122 BLAUPUNKT

How do I install the dashcam?

Use the suction cup mount to attach the camera to your windshield. Ensure it is positioned behind the rearview mirror for optimal view. Route the power cable along the headliner and connect to the car's 12V socket.

What SD card should I use?

Use a MicroSD card with Class 10 or UHS-I rating, up to 32GB capacity. Format the card in the camera using the menu setting before first use.

How do I enable loop recording?

Press the Menu button, navigate to 'Loop Recording' using the Up/Down buttons, then select the desired clip length (1/3/5 min). Press Record to confirm.

How to use motion detection?

In the menu, select 'Motion Detection' and set to 'On'. The camera will start recording automatically when movement is detected. Note: This may reduce standby time.

How do I view recorded videos?

Press the Mode button to enter Playback mode. Use Up/Down to select a file, then press Record to play. Alternatively, connect the camera to a PC via USB to copy files.

Why is my camera not recording?

Check if a MicroSD card is inserted and has free space. Ensure the card is formatted in FAT32. Also verify that the camera is receiving power and the screen shows the recording icon.

How to reset the camera?

Use the reset button (small pinhole) located near the power button. Insert a paperclip gently to press the reset switch. Alternatively, remove the battery and USB power for 10 seconds.

Is there night vision?

Yes, the BPDV122 features infrared LEDs for night recording. In low light, the IR LEDs automatically activate, providing clear footage up to 5 meters.

How do I update firmware?

Download the latest firmware from the official Blaupunkt website. Copy the .bin file to a formatted MicroSD card, insert it into the camera, and power on. Follow on-screen instructions.

What should I do if the camera freezes?

Press and hold the power button for 10 seconds to force restart. If persistent, remove the battery and USB power, wait 30 seconds, then reconnect. If issue continues, perform a factory reset via menu.

USER MANUAL BPDV122 BLAUPUNKT

1. USB Connection
2. SD Card Slot
3. Speaker 4 Mount Socket
4. Microphone
5. Battery Cover
6. Lens
7. Infrared Lamp

Directions For Use:

Charging (two methods):

A) Use the built-in rechargeable lithium battery

1) Connect the DashCam to a computer or USB charger with the USB cable.

2) The red indicator light will turn on to indicate the DashCam is charging. When it is done charging, the light will turn off.

Note: When using the DashCam, press the power button to start or stop recording videos.

B) Connect the 12V/24V car charger

1) After starting your car, the DashCam will automatically start recording. 2) The DashCam will stop working after the power is turned off and will

automatically save recording.

When the battery power is low, the DashCam screen will display "Electricity Shortage".

Function Introduction

DashCam with video/photo/audio playback

When connected to the car charger, the DashCam will automatically enter video recording mode to start recording. The end indicates light will turn on.

recording mode to start recording. The red indicator light will turn on:

A) Video Mode

- Press the power switch button or connect the car charger to turn on the DashCam. The DashCam will automatically turn on in video mode.

- When connected to the car charger, the DashCam will automatically enter video

recording mode and start to record. The red indicator light will turn on.

• To manually begin video recording, press the record button.

- Press the button to stop recording. The red indicator light will turn off. - Press the record button again to stop recording. The red indicator light

NOTE: Please insert an SD card into the SD card slot before use. All recorded files will be

stored on the SD card.

B) Camera Mode

Turn on the DashCam and press the "mode" button to enter the camera mode.

Press the "Record" button to take pictures. Press the menu button to enter the camera setting menu.

1) Playback Mode

Turn on the DashCam and press the mode button three times to enter playback mode.

Press the up/down button to navigate and select the files you want. Then press the "Record" button to play or pause the file. Press the "Mode" button to return to the previous screen.

Press the "Record" button to play or pause the file. Press the "Mode" button to return to the previous screen and exit.

2) Delete Function

In playback mode, press the menu button to enter the playback menu. Use the up/down button to select "Delete".

Then press the "Record" button to enter the delete menu. Continue using the up/down button to make a selection and the "Record" button to confirm.

Continue using the up/down button to make a selection and the "Record" button to confirm.

E) Enter the Setting Menu in Video Mode

Press the menu button to enter the setting menu. Press up/down to navigate the different options. Press the "Record" button to select an option. Repeat the previous step to navigate sub-menus.

Press the "Record" button to select an option. Repeat the previous step to navigate sub-menus and press the "Record" button to select. Press the menu button to return to the previous screen and exit.

Navigate through the options and press the "Record" button to select. Press the menu button to return to the previous screen and exit.

1) Time Stamp: Ch

1) Time Stamp: Choose whether or not the date and time is displayed on screen. To change the date/time: Press the menu button to enter the settings menu and press

again to enter the setup. Press up/down to select "Date Input" and then press the

"Record" button to confirm. Adjust the date/time using the up/down button.

Choose the correct number and press the "Record" button to confirm and move to the next selection.

TO TREAT SELECTION:

2) Motion Detection: Go to video mode settings to turn Motion Detection on/off.

When Motion Detection is turned ON, the DashCam will automatically begin

recording when movement is detected.

3) Recording: Press the button to turn recording on/off.

4) Cycled Recording Function: When the SD card is full, the DashCam will

automatically delete the oldest files and overwrite them with new files.

5) Formatting: When you select "Yes" all the stored files will be cleared from your

SD card.

6) Languages: 12 languages total

English, Simplified Chinese, Traditional Chinese, Russian, Spanish, Polish, French,

Korean, Italian, German, Portuguese and Japanese.

7) Reset System: When you select "Yes" the DashCam will reset and restore

factory settings.

8) IR lamp frequency: 50Hz/60Hz

IR lamp has automatic infrared night vision.

Technical Specifications

4) 0.576 + 11.696

1) 2.5" Swivel LCD Screen 2) Records 720p Video

3) 0.3MP Camera

4) 1/4 Color CMOS HD Image Sensor

5) Night Vision 6) SD card Slot Support up to 32GB

6) 3D Card Slot Stop 7) UFR Connection

8) High Speed Recording

9) Cycled Recording

10) Power Input: DC

11) Rechargeable Battery 12) Built-in Microphone

In The Box:

DashCam Mounting

300mAh Lithium Battery

USB Cable

Car Charger

User Manual Warranty Card

Warranty Color

BLAUPUNKT

Shaghal Ltd. 2231 Colby Ave, Los Angeles, California 90064

©2016 BLAUPUNKT. All Rights Reserved. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING: This product contains a chemical known to the State of California to cause cancer and reproductive toxicity.