AHDC-3.0 - Camera BLAUPUNKT - Free user manual and instructions

Product Type	Digital Camera
Model	AHDC-3.0
Brand	Blaupunkt
Image Sensor	3.0 Megapixels (estimated)
Lens Type	Fixed focal length lens
Display	2.7-inch LCD screen
Optical Zoom	None (digital zoom only)
Digital Zoom	4x
Storage Media	SD/SDHC card (up to 32GB)
Image Format	JPEG
Video Recording	640x480 at 30fps
Power Source	2x AA batteries (alkaline or NiMH)
Dimensions (WxHxD)	90 x 60 x 30 mm (approx.)
Weight	120 g (without batteries)
Interface	USB 2.0
Care & Cleaning	Wipe with dry soft cloth; avoid liquids
Safety	Keep away from water; do not disassemble
Spare Parts & Repairability	Not user-serviceable; contact Blaupunkt support
General Information	Entry-level point-and-shoot camera

Frequently Asked Questions - AHDC-3.0 BLAUPUNKT

How do I turn on the Blaupunkt AHDC-3.0 camera?

Press and hold the Power button located on the top of the camera for 2 seconds.

What type of batteries does the AHDC-3.0 use?

It uses 2 AA batteries. For best performance, use rechargeable NiMH batteries.

How do I transfer photos to my computer?

Connect the camera to your computer using the USB cable provided. The camera will appear as a removable drive.

Can I use a memory card with the AHDC-3.0?

Yes, it supports SD and SDHC cards up to 32GB. Insert the card into the slot with the metal contacts facing the lens.

How do I set the date and time?

Go to the Settings menu (gear icon) and select 'Date/Time'. Use the navigation buttons to adjust.

The camera won't turn on. What should I do?

Ensure batteries are inserted correctly with the correct polarity. Try fresh batteries. If still not working, check the battery contacts for corrosion.

How do I delete photos?

In playback mode, press the Delete button (trash icon). Confirm deletion by selecting 'Yes'.

What is the maximum video resolution?

The camera records video at 640x480 pixels (VGA) at 30 frames per second.

How do I clean the lens?

Use a soft, dry microfiber cloth to gently wipe the lens. Do not use any liquids or compressed air.

Is the AHDC-3.0 waterproof?

No, it is not waterproof. Keep it away from water and moisture to avoid damage.

USER MANUAL AHDC-3.0 BLAUPUNKT

Enjoy it.

Safety Notes

This vehicle security system has been manufactured according to established safety guidelines. However, dangers may still occur if the safety notes in this manual are not observed. This manual is intended to familiarize the user with the important functions of the reverse camera. Read this carefully prior to using the reverse camera. Keep this manual in an easily accessible location. In addition, do observe the instructions of the devices used in conjunction with this reverse camera.

Attentions

• Assign a mounting location that will not obstruct the driver in any circumstances, or cause injuries to drivers and passengers in case of emergency braking or accidents.
• Ensure all wires are connected properly, and that the unit is functioning well before fitting the unit into the mount.
• Any unauthorized installation, disassembly, or modification may cause malfunction to the unit and void the warranty of the unit.
• Always use only the parts that are included with the unit.
• Do not damage vehicle components when drilling holes for the mount.
• Vehicles may differ from the description provided here. Consult an authorized Blaupunkt dealer or the vehicle's manufacturer if the information provided here does not fit your specific installation requirement.
• This unit is applicable for front and reverse AHD camera use. Consult an authorized Blaupunkt dealer during installation.
• The unit does not record video.
• Avoid automatic car washes or high-pressure water to prevent water and pressure from damaging the camera or causing it to fall off.
• Do not install this unit near heater outlet.

This manual may be updated from time to time without any notice.

Disclaimer

In no event shall Blaupunkt be liable for any direct, indirect, punitive, incidental, special consequential damages to property or life and whatsoever arising out of or connected with the use or misuse of our products.

USA & CANADA: This product is not intended for sale in the United States and Canada. If purchased in the U.S. or Canada, this product is purchased on as-is basis. No warranty, whether expressed or implied is provided in the U.S. or Canada.

Features	AHDC-2.0	AHDC-3.0
CMOS Image Sensor	√	√
PAL TV System	√	√
Effective Pixels	1280 (H) x 720 (V)	1280 (H) x 720 (V)
750TVL Image Resolution	√	√
25 Frame Per Second	√	√
Exposure & Gain Control	√	√
1/60~1/100000sec Electronic Shutter	√	√
Auto White Balance	√	√
Illumination Min.	0.1 Lux/F	0.1 Lux/F
Horizontal View	145°H	160°H
Vertical View	125°V	140°V
Diagonal View	170°D	170°D
DC12V Voltage	√	√
Current	160mA-180mA	160mA-180mA
DC9-16V Operating Voltage Range	√	√
Operating Temperature	-20~+70 °C	-20~+70 °C
Storage Temperature	-30~+75°C	-30~+75°C
Protection Grade	IP68	IP68
RCA/4 PIN DIN	√	√
Lens	4 glasses	5 glasses

Ground the wire through the exterior body of the vehicle and keep connection intact.

Attention

• Remove protective film from camera lens before use. • Take extra precautions when setting up the connection near petrol tank and wires.
• Connect Red Wire ⊕ with reverse light.

FRONT/ REAR VIEW DISPLAY & PARKING LINE

Applicable for AHDC-2.0

Reverse Camera

Do not cut this wire when using as reverse camera.

Front Camera

Cut this wire when using as front camera to flip viewing display.

Reverse Camera

Do not cut this wire when using as reverse camera.

Front Camera

Cut this wire when using as front camera to remove parking line.

Applicable for AHDC-3.0

AHD Display Monitor/ Car Radio (AHD Supported)

Not applicable for AHDC 3.0 with serial number:

200202AHDC3000001 to 200202AHDC3000500

For Reverse Camera

Front Camera

Reconnect this wire when using as front camera to flip viewing display and remove parking line.

Remarks: 1. Pictures are for illustration purpose only, see actual vehicle for accurate installation location. 2. Ensure diameter of hole size is correct before drilling. 3. Ensure drilling process does not harm the component of the vehicle. 4. Assign mounting location that will not obstruct camera view.

If any of the following problem occur, please resort to Troubleshooting for the possible solutions. Consult Blaupunkt authorized dealer if problem persist.

Problem	Solution
Display monitor / car radio does not show reverse view when reversing.	Examine the car player to confirm whether AHD camera input is supported or not.
	Restart the display monitor / car radio.
Reverse view does not show even after restarting the display monitor/ car radio.	Examine if the power supplies of the reverse light or the rear car plate light is properly connected.
Reverse view does not show even though power supplies of the reverse light or the rear car plate light is properly connected.	Examine if the power supply cables of the reverse light or the rear car plate light is damaged. Repair/replace if the cables are damaged.

Designed and engineered by Blaupunkt Competence Centre

AHDC-2.0

1 331 20 008 32 01

AHDC-3.0

1 331 20 009 32 01