SR-PAX2 - Blender Saramonic - Free user manual and instructions
Find the device manual for free SR-PAX2 Saramonic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Audio Mixer |
| Brand | Saramonic |
| Model | SR-PAX2 |
| Number of Channels | 2 |
| Inputs | 2 x XLR (balanced), 1 x 3.5mm (unbalanced) |
| Outputs | 1 x 3.5mm TRS (stereo) |
| Phantom Power | +48V switchable per channel |
| Low-Cut Filter | 80Hz, switchable per channel |
| Power Source | 2 x AA batteries (not included) or USB-C 5V |
| Battery Life | Approximately 6 hours (with phantom power off) |
| Dimensions | 10.2 x 6.4 x 3.0 cm |
| Weight | 125 g (without batteries) |
| Mounting | Shoe mount adapter included |
| Indicators | LED power and signal/peak LEDs per channel |
| Frequency Response | 20 Hz – 20 kHz |
| Signal-to-Noise Ratio | >85 dB |
| Total Harmonic Distortion | <0.01% |
| Input Impedance | XLR: 1.8 kΩ, 3.5mm: 18 kΩ |
| Output Impedance | 100 Ω |
| Maximum Input Level | XLR: +12 dBu, 3.5mm: +2 dBu |
| Maximum Output Level | +2 dBu |
Frequently Asked Questions - SR-PAX2 Saramonic
How do I power the SR-PAX2?
You can power the SR-PAX2 using two AA batteries (not included) or via a USB-C connection (5V). The USB-C port can also be used to power the device without batteries.
Can I use the SR-PAX2 with a smartphone?
Yes, you can connect the SR-PAX2 to a smartphone using a 3.5mm TRS to TRRS adapter (not included). The output is a standard stereo 3.5mm jack.
What is phantom power and when should I use it?
Phantom power (+48V) is required for condenser microphones. Use the switch on each channel to turn it on when using condenser mics, and turn it off for dynamic or ribbon mics to avoid damage.
How do I activate the low-cut filter?
Each channel has a switch labeled 'LPF' or 'Low Cut'. Toggle it to activate an 80Hz high-pass filter to reduce low-frequency rumble.
What is the battery life?
Battery life is approximately 6 hours when using two fresh AA alkaline batteries and phantom power is off. Using phantom power reduces battery life significantly.
Can I use rechargeable batteries?
Yes, you can use rechargeable AA batteries (NiMH). However, battery life may be shorter than with alkaline batteries.
What cables are included?
The SR-PAX2 comes with a 3.5mm TRS to TRS cable for connecting to cameras or recorders. No other cables are included.
Is the SR-PAX2 compatible with DSLR cameras?
Yes, it is designed for DSLR and mirrorless cameras. Connect the 3.5mm output to the camera's microphone input. Use the shoe mount adapter to attach the mixer to the camera's hot shoe.
How do I adjust audio levels?
Each channel has a gain control knob to adjust the input level. Monitor the signal using the peak LED; it should flicker occasionally but not stay solid to avoid clipping.
What is the maximum input level for XLR inputs?
The maximum input level for XLR inputs is +12 dBu. For the 3.5mm input, it is +2 dBu. Ensure your microphone's output does not exceed these levels to prevent distortion.
User questions about SR-PAX2 Saramonic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Blender in PDF format for free! Find your manual SR-PAX2 - Saramonic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SR-PAX2 by Saramonic.