SM82-EZ-II - Pregnant SoundTube - Free user manual and instructions
Find the device manual for free SM82-EZ-II SoundTube in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Ceiling Speaker |
| Brand | SoundTube |
| Model | SM82-EZ-II |
| Category | Speaker |
| Application | Indoor |
| Mounting Type | Ceiling mount with spring-loaded clamps |
| Woofer Size | 8 inches |
| Transformer | 70V/100V with multiple taps |
| Impedance (8 ohm bypass) | 8 ohms |
| Power Taps | 60W, 30W, 15W, 7.5W |
| Frequency Response | 55 Hz - 20 kHz |
| Sensitivity | 90 dB |
| Dimensions (H x W x D) | 11.1 x 11.1 x 8.8 inches |
| Weight | 8.5 lbs |
| Color | White |
| Grille Material | Perforated steel |
| Backcan Material | Steel |
| Environmental Rating | Indoor use only |
| Maintenance | Clean with soft dry cloth |
| Safety | Do not install near water or heat sources |
| Installation | Easy install with included clamps and euroblock connector |
| Included Accessories | Grille, backcan, clamps, euroblock connector, cutout template |
| Warranty | 5 years |
Frequently Asked Questions - SM82-EZ-II SoundTube
How do I install the SM82-EZ-II speaker?
Cut a hole of the appropriate size (template included), feed the speaker cable through the backcan, connect the euroblock connector, set the transformer tap, insert the speaker into the hole, and tighten the spring-loaded clamps.
What type of cable does it use?
Use standard speaker wire (2-conductor) for 8 ohm operation, or suitable gauge for 70V/100V systems. The speaker includes a euroblock connector for easy termination.
What is the power handling of the SM82-EZ-II?
The speaker handles up to 60W RMS on the highest tap, with lower taps available: 30W, 15W, and 7.5W.
Can I use this speaker outdoors?
No, the SM82-EZ-II is designed for indoor use only. Exposure to moisture or extreme temperatures may damage the speaker.
How do I set the transformer taps on the SM82-EZ-II?
The transformer has a rotary switch on the front. Select the desired power tap (60W, 30W, 15W, 7.5W) or the 8 ohm bypass position using a small flathead screwdriver.
What is the impedance of the SM82-EZ-II when bypassed?
When the transformer is set to bypass, the impedance is 8 ohms, suitable for direct connection to an amplifier.
How do I clean the SM82-EZ-II speaker?
Use a soft, dry cloth to wipe the grille and backcan. Do not use water or cleaning solvents, as they may damage the finish or internal components.
What is the warranty on this speaker?
SoundTube offers a 5-year limited warranty on the SM82-EZ-II against defects in materials and workmanship.
What tools are needed for installation?
You will need a drywall saw or jigsaw for cutting the hole, a screwdriver for the clamps, and a wire stripper for preparing the cable.
Is the SM82-EZ-II compatible with 70V and 100V systems?
Yes, the speaker has a transformer that works with both 70V and 100V distributed audio systems. The power taps are the same for both voltage levels.
User questions about SM82-EZ-II SoundTube
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pregnant in PDF format for free! Find your manual SM82-EZ-II - SoundTube and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SM82-EZ-II by SoundTube.