Aerodome II - Tent Zempire - Free user manual and instructions

Product Type	2-Person Dome Tent
Brand	Zempire
Model	Aerodome II
Dimensions (Interior)	210 x 210 cm (Floor), Height 130 cm
Packed Size	50 x 18 cm
Weight	3.2 kg
Flysheet Fabric	Polyester, 190T, PU Coated, 1500mm Hydrostatic Head
Floor Fabric	Polyethylene PE, 120 g/m², Welded Floor
Poles	Fiberglass, 8.5mm Diameter, Color-Coded Sleeves
Waterproof Rating	Flysheet 1500mm, Floor 5000mm
Ventilation	Mesh Roof Vents and Mesh Inner Doors
Doors	One Zipped D-Shaped Door with Mesh
Setup Type	BreezeblockTM Quick-Pitch System (Flysheet-Integrated Poles)
Packaging	Compression Carry Bag Included
Seasons	3-Season
Warranty	1 Year Manufacturer Warranty
Care Instructions	Clean with Mild Soap and Water, Dry Before Storage
Accessories	Steel Pegs (8), Guy Ropes (4), Repair Kit

Frequently Asked Questions - Aerodome II Zempire

How do I set up the Aerodome II tent?

Lay the tent flat, extend the color-coded poles, and insert into corresponding sleeves. The Breezeblock™ system automatically attaches the flysheet. Secure with pegs and guylines.

Is the tent fully waterproof?

Yes, the flysheet has a 1500mm hydrostatic head and the floor has a 5000mm hydrostatic head. The welded floor seams prevent water ingress.

How many people can the Aerodome II fit?

It is designed for 2 people with extra gear. The interior floor measures 210x210 cm.

What is the packed weight?

The total packed weight is approximately 3.2 kg, including the carry bag.

Can the tent be used in strong winds?

The dome shape is aerodynamic, but we recommend using all guy ropes (4 provided) and additional pegs for stability in high winds.

How do I clean and store the tent?

Clean with mild soap and water, avoid harsh chemicals. Ensure the tent is completely dry before storing to prevent mold.

Are spare parts available?

Yes, replacement poles, pegs, and guylines can be purchased from Zempire or authorized dealers. The tent also includes a repair kit.

Is the tent suitable for backpacking?

With a packed size of 50x18 cm and weight of 3.2 kg, it is lightweight for backpacking, though more suited for car camping due to the integrated pole system.

Does the tent have good ventilation?

Yes, it features mesh roof vents and mesh inner doors to promote airflow and reduce condensation.

How long is the warranty?

The tent comes with a 1-year manufacturer warranty against defects in materials and workmanship.

USER MANUAL Aerodome II Zempire

INNER TENT ATTACHMENT

1. Lay out the inner inside the tent with the door facing the centre and the black floor facing downwards.
2. Attach the buckles at the rear corners of the tent and connect the toggles on the inner through the corresponding rings working your way from the rear to the front.
3. The room can remain attached when deflating the tent.

Side Release Buckles

IN THE UNLIKELY EVENT OF YOUR TENT DEVELOPING A LEAK

1. Firstly check all valves are screwed in correctly.
2. Deflate the faulty AERO-FRAME and unzip the flysheet sleeve.
3. Remove the tube from the Outer by cutting the cable tie holding the zipper ends together and unzip.

CAUTION: DO TO OPEN THESE ZIPS WHEN THE POLE IS INFLATED.

1. Remove the clear tube from the sleeve.
2. Partially inflate the tube and check for leaks (bubbles) in a basin of water.
3. Using the repair patch provided cover the hole and seal.
4. Partially inflate the tube and re insert into the pole sleeve. Zip together.
5. Connect the zipper ends with the replacement Cable ties provided.

For a detailed description of all the features and specifications of this product please visit our website.

WWW.ZEMPIRECAMPING.COM

Tested in New Zealand. Made with care in China

Zempire® "FREEDOM CAMPING

AERODOME II

INFLATABLESERIES

INSTRUCTIONS

AERODOME II

INFLATABLES

INSTRUCTIONS

1. Clear your site making sure there are no sharp objects where you are going to pitch your tent. Try to get a site that is as flat as possible. Spread tent out, the PVC windows are located at the front.
2. Peg out the 4 peg points on the main body of the tent as shown.

1. Unzip the triangle Valve Cover on the Left hand side of the tent and locate the AERO-FRAME valves.

2. Remove the valves completely and re-screw in to ensure the valve is not cross-threaded. Screw in firmly but do not over tighten. Open the valve caps.

3. The Pump features a double hose adapter which allows two tubes to be inflated at the same time.

Ensure the pump is configured as per the following diagram.

Attach the of the hoses to the AERO-FRAME valve inlets.

1. Begin to inflate the centre and left hand side AERO-FRAME. Have someone walk inside to help raise the frame during inflation. Inflate to 7 PSI. DO NOT INFLATE ABOVE 8PSI. THIS MAY CAUSE DAMAGE TO THE POLES AND THE TENT.

2. Once inflated to the correct pressure, remove the pump hoses and securely attach the valve caps. Close the Valve Cover.

Front Inflation Valve

1. Inflate the front awning and the Right Hand Side Room

AERO-FRAME following the same procedure as above, then remove the hose and securely attach the valve caps.

1. Peg out the remaining peg points around the tent ensuring that the floor sits flat. It is easier to align the front door correctly with the door closed.
2. Peg out the front and rear anchor webbings. These should sit at a 45° angle to the ground.
3. Peg out the 4 draft vents on either side of the bedrooms. These can be pegged closed during cooler weather conditions.
4. It is recommended that guy ropes are pegged out at all times and windows are opened whenever possible to allow adequate ventilation.

Insert pegs at a 45° angle

DEFLATION

1. Remove the valves from the AERO-FRAME. Take care as poles will be under pressure.
2. It may be necessary to remove some excess air from the AERO-FRAME before rolling up your tent. This can be done by carefully walking down the length of the tube towards the valve end.