Millbrook - Tent Zempire - Free user manual and instructions

Product Type	Tent
Brand	Zempire
Model	Millbrook
Capacity	4 persons
Dimensions (L x W x H)	240 x 210 x 130 cm
Packed Size	60 x 20 x 20 cm
Weight	8.2 kg
Flysheet Material	Polyester 190T with PU coating
Floor Material	Polyethylene 120 g/m²
Poles	Fiberglass, 9.5 mm diameter
Waterproof Rating (Flysheet)	2000 mm
Waterproof Rating (Floor)	3000 mm
Ventilation	Mesh panels and adjustable vents
Doors	2 D-style doors with mesh
Windows	4 mesh windows with covers
Seams	Taped seams
Storage	Internal mesh pockets and gear loft
Setup Type	Pole sleeve and clip
Included Accessories	Steel pegs, guy ropes, carry bag
Warranty	2 years

Frequently Asked Questions - Millbrook Zempire

How do I set up the Millbrook tent for the first time?

Lay out the tent, assemble the poles, insert them into the sleeves/clips, raise the tent, and secure with pegs and guy ropes. Refer to the included manual for detailed steps.

Is the Millbrook tent waterproof?

Yes, the flysheet has a 2000 mm waterproof rating and the floor has 3000 mm. Seams are taped for extra protection.

How many people can sleep in the Millbrook tent?

It is designed for 4 persons with enough space for sleeping bags and gear.

What is the packed size and weight of the tent?

The packed size is approximately 60 x 20 x 20 cm and it weighs 8.2 kg.

Can the tent withstand strong winds?

With proper staking and guying, it can handle moderate winds. Use all provided guy ropes and pegs for stability.

How do I clean and maintain the tent?

Clean with mild soap and water, avoid harsh chemicals. Dry completely before storing. Store in a cool, dry place.

Are replacement parts available for the Millbrook tent?

Yes, Zempire offers spare parts such as poles, pegs, and guylines. Contact customer support or check the website.

Does the tent have good ventilation?

Yes, it features mesh panels and adjustable vents to reduce condensation and improve airflow.

Can I use a stove inside the tent?

It is not recommended unless the tent has a stove jack. The Millbrook does not have one, so avoid using stoves inside.

How do I pack the tent back into the carry bag?

Fold the tent carefully, roll it tightly, and place it into the bag. Ensure it's dry to prevent mildew.

USER MANUAL Millbrook Zempire

1) Open up all windows and close all doors.
2) Remove the RED awning poles 3) Remove the YELLOW Support poles.
4) Remove the BLACK Ridge poles.
5) Remove the BLUE & GREEN Eve poles.
6) Remove all pegs, clean and place in peg bag.
7) Lay tent as flat as possible and fold the awning over main body of the tent.
8) Fold both sides into the centre of the tent

9) Fold in half. Ensure the width is the same as the length of your carry bag. Adjust if necessary.

10) Expel as much air as possible by walking down the tent towards the door
11) Roll the tent from the rear towards the door. Ensure that you wipe off any condensation and dirt as you roll.

Exterior view of a modern camping tent with triangular panels and wooden doors (no signage or text visible)

Exterior view of a modular camping tent with dark walls and wooden frames (no signage or text visible)

Freedom zempire

Freedom Zempire is proud to be a 100% owned and operated business.

For more information about this and other great products we offer please visit our website.

WWW.FREEDOMCAMPING.COM

POLE DIAGRAM - MILLBROOK

graph TD
    subgraph Left_Series
        A1["Chromosome A1"] --> A2["Chromosome A2"]
        A1 --> A3["Chromosome A3"]
        A1 --> A4["Chromosome A4"]
        A1 --> A5["Chromosome A5"]
    end
    subgraph Right_Series
        B1["Chromosome B1"] --> B2["Chromosome B2"]
        B1 --> B3["Chromosome B3"]
        B1 --> B4["Chromosome B4"]
        B1 --> B5["Chromosome B5"]
        B1 --> B6["Chromosome B6"]
        B1 --> B7["Chromosome B7"]
        B1 --> B8["Chromosome B8"]
        B1 --> B9["Chromosome B9"]
        B1 --> B10["Chromosome B10"]
        B1 --> B11["Chromosome B11"]
        B1 --> B12["Chromosome B12"]
        B1 --> B13["Chromosome B13"]
        B1 --> B14["Chromosome B14"]
        B1 --> B15["Chromosome B15"]
        B1 --> B16["Chromosome B16"]
        B1 --> B17["Chromosome B17"]
        B1 --> B18["Chromosome B18"]
        B1 --> B19["Chromosome B19"]
        B2 --> C1["Chromosome C1"]
        C1 --> C2["Chromosome C2"]
        C1 --> C3["Chromosome C3"]
        C1 --> C4["Chromosome C4"]
        C1 --> C5["Chromosome C5"]
        C2 --> D1["Chromosome D1"]
        D1 --> D2["Chromosome D2"]
        D1 --> D3["Chromosome D3"]
        D1 --> D4["Chromosome D4"]
        D2 --> E1["Chromosome E1"]
        E1 --> E2["Chromosome E2"]
        E2 --> E3["Chromosome E3"]
        E3 --> E4["Chromosome E4"]
        E4 --> E5["Chromosome E5"]
        E5 --> E6["Chromosome E6"]
        E6 --> E7["Chromosome E7"]
        E7 --> E8["Chromosome E8"]
        E8 --> E9["Chromosome E9"]
        E9 --> E10["Chromosome E10"]
        E10 --> E11["Chromosome E11"]
        E11 --> E12["Chromosome E12"]
        E12 --> E13["Chromosome E13"]
        E13 --> E14["Chromosome E14"]
        E14 --> E15["Chromosome E15"]
        E15 --> E16["Chromosome E16"]
        E16 --> E17["Chromosome E17"]
        E17 --> E18["Chromosome E18"]
        E18 --> E19["Chromosome E19"]
        E19 --> E20["Chromosome E20"]
        E20 --> E21["Chromosome E21"]
        E21 --> E22["Chromosome E22"]
        E22 --> E23["Chromosome E23"]
        E23 --> E24["Chromosome E24"]
        E24 --> E25["Chromosome E25"]
        E25 --> E26["Chromosome E26"]
        E26 --> E27["Chromosome E27"]
        E27 --> E28["Chromosome E28"]
        E28 --> E29["Chromosome E29"]
        E29 --> E30["Chromosome E30"]
        E30 --> E31["Chromosome E31"]
        E31 --> E32["Chromosome E32"]
        E32 --> E33["Chromosome E33"]
        E33 --> E34["Chromosome E34"]
        E34 --> E35["Chromosome E35"]
        E35 --> E36["Chromosome E36"]
        E36 --> E37["Chromosome E37"]
        E37 --> E38["Chromosome E38"]
        E38 --> E39["Chromosome E39"]
        E39 --> E40["Chromosome E40"]
        E40 --> E41["Chromosome E41"]
        E41 --> E42["Chromosome E42"]
        E42 --> E43["Chromosome E43"]
        E43 --> E44["Chromosome E44"]
        E44 --> E45["Chromosome E45"]
        E45 --> E46["Chromosome E46"]
        E46 --> E47["Chromosome E47"]
        E47 --> E48["Chromosome E48"]
        E48 --> E49["Chromosome E49"]
        E49 --> E50["Chromosome E50"]
        E50 --> R6[R6-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RA-RLA-RLA-RLA-RLA-RLA-RLA-RLA-RLA-RLA-RLA-RLA-RLA-RLA-RLA-RLA-RLA-RLA-RLA-RLA-RLA-RLA-RLA-RLA-RLA-RLA-RLA-RLA-RLA-RLA-RLA-RLA-RLA-RLA-RLA-LRLA-LRLA-LRLA-LRLA-LRLA-LRLA-LRLA-LRLA-LRLA-LRLA-LRLA-LRLA-LRLA-LRLA-LRLA-LRLA-LRLA-LRLA-LRLA-LRLA-LRLA-LRLA-LRLA-LRLA-LRLA-LRLA-LRLA-LRLA-LRLA-LRLA-LRLA-LRLA-LRLA-LR.AL-R6-R6
    end
    style Left_Series fill:#f9f,stroke:#333
    style Right_Series fill:#bbf,stroke:#333

POLE CHART

Ridge Pole (BLACK)

Line 1 - R1, R2, R3, R4

Line 2 - R5, R6,

Line 3 - RA, RB

Line 3 - RA, RB

Line 3 - RA, RB

Line 4 - RC, RD

LH Eve Pole (GREEN)

Line 1 - E1, E2, E3, E4,

Line 2 - E5

Line 3 - EA, EB

Line 4 - EA. EB

RH Eve Pole (BLUE)

Line 1 - E1, E2, E3, E4,

Line 2 - E5

Line 3 - EA, EB

Line 4 - EA, EB

Support Pole (YELLOW)

Line 1 - S2, S3, S4

Line 2 - S1

Line 3 - S5

Awning Pole (RED)

Line 1 - A1, A2

Line 2 - A1, A2

Line 3 - A3, A4

Line 4 - A3, A4

Side Awning Poles (RED)

Line 1 - A1, A2

Line 2 - A1, A2

Line 3 - A1, A2

Line 4 - A1, A2

Pegs 39

Spike Washers 7

Pole Feet 3

Guy Rope 4m 2

Guy Rope 3m 6

WEATHERING YOUR TENT

When you first get your new tent you will need to weather it. This is a process of soaking the fabric to ensure that all the thread swells up filling stitch holes and creating a watertight surface.

When you pitch your tent for the first time soak the fabric with a garden hose until the fabric looks visibly damp. Allow to dry and repeat for two or three times.

Your tent will get more watertight the more you use it. Do not be concerned if you have a small amount of water coming through the seams on the first few times you get heavy rain.

NATURAL FIBER

Freedom Canvas is made of a combination of Natural Cotton for breathability and water fastness and Polyester for strength.

Please note that as Cotton is a natural fiber you will notice variances of both colour and thickness of the thread. This is normal and is a characteristic of a natural and breathable fiber.

FIRE RETARDANT

Freedom Canvas Tents are treated with a fire retardant solution. While this significantly reduces the risk of the fabric catching in fire, it is by no means fireproof. Ensure open flames are kept well away from your tent at all times.

1) Clear your site making sure there are no sharp objects. Try to choose a site that is flat and clear.
2) Sort the poles into their matching colour. Once sorted, connect each colour pole length together as per the pole chart.
3) Spread your tent out with floor facing down. The front is the end with the large awning roof attached.
4) Peg out the four corners of the tent. Pull the floor as tight as possible. To ensure the floor sits flat it may be easier to peg in the following Sequence. Pegs should be at a 45^ angle away from the tent for greatest hold.

5) Peg out the remaining peg points ensuring the floor sits flat.

6) Open all doors and windows. This allows air to enter the tent and makes pitching easier
7) Thread the BLUE poles (E1 to E4) through the pole sleeve that runs along the RHS of the tent. Thread the poles from the rear of the tent inserting the pole through the Black webbing loop before threading through the pole sleeve and place behind the button pin on the pole.

8) At the front of the tent thread the BLUE E5 pole up through the pole sock on the side of the front awning from the inside to the outside. Thread through the Black webbing loop before inserting into the pole sleeve and connecting to the E4 pole. Pull the webbing over the button pin on the pole. If required use a peg through the webbing to get a better hold.

9) Cover the pole by wrapping the end of the pole sleeve over the pole sock and attach the Velcro.

Abstract geometric illustration with curved shapes and shaded regions (no text or symbols)

10) Repeat with the GREEN pole

11) Insert the remaining BLUE EA and EB poles into the end of each section and raise the pole so that the outside wall sits taught. You will need two people to do this.

12) Repeat with the GREEN EA and EB poles.

13) Thread the BLACK R1 to R4 poles inside the tent by threading through the pole sock at the top of the Front wall and opening at the top of centre dividing wall.

14) Insert the BLACK RB/RA pole into the hole at the end of the R1 pole and then through the eyelet at the rear of the roof and extend until the wall sits tight and close the flip lock. Attach the Velcro strips on the rear wall.

Simple line drawing of a mechanical assembly or mounting bracket (no text or symbols)

15) Repeat with the second BLACK RA/RB pole at the front of the tent. Thread the RB pole through the outermost of the 3 holes on the BLACK R4 pole. If the roof is too tight move back one hole before threading through the eyelet in the roof. Ensure the end of the BLACK R4 pole extends out the pocket on the front wall. Attached the Velcro strips on the front wall around the pole

16) Place white "Witch Hat" washers onto pole spikes of both RB poles to prevent water running down during heavy rain.

Simple diagram of a red lamp mounted on a white base with a gray background (no text or symbols)

17) Connect the C Clip at the top of the BLACK RC/RD pole to the BLACK ridge pole directly behind the centre dividing wall and extend until the wall is taught. Close the fliplock. Attach the Velcro strips on the Dividing wall around the pole.

Freedom millbrook zempire

18) Place the YELLOW pole sections S2 to S4 behind the centre dividing wall.

19) Insert open end of the YELLOW S1 pole through the pole sock half way along the RH outside wall. Attach the C Clip to the BLUE eve pole and lift the pole sock so it sits under the pole sleeve

Repeat with the YELLOW S5 pole attaching to the GREEN eve pole.

Abstract geometric diagram with colored segments and a green circular element (no text or symbols)

20) Insert the YELLOW S1 pole into the end of the S2 pole. Repeat with S5 into S4. Extend both sides and close the fliplocks.

21) Insert BLACK R6 / R7 pole into the end of the R4 pole that extends through the pole sock at the front of the tent.

22) Insert the BLACK RB/RA pole into the hole at the end of the BLACK R6 pole and then through the eyelet at the end of the awning. Extend and close the Flip Lock.

23) Extend the BLACK R5/R6 pole until the awning is tight. Close the Flip Lock. You may need to lower the pole by moving the support poles to the side.

24) Insert the RED A1/A2 poles into the eyelets at the front corners of the awning.

3D wireframe diagram of a geometric structure with labeled points A1, A2, and A1 (no text or symbols beyond labels)

25) Guy out the front awning by attaching the short guy ropes over top of awning pole spikes. Line up the guy rope with the pole spike and the top ridgepole spike (indicated by the -- Line). Ensure the guy rope is at a 45^ angle and pegs are also inserted at a 45^ angle.

3D wireframe diagram of a geometric structure with vertical supports and a 45-degree angle标注 (no text or symbols beyond the angle marker)

26) Insert the longer RED A3/A4 pole into centre of the side of the awning. Guy out at a 45^ angle with the longer guy rope sections.

27) Peg out front valance. The bottom of the valance should sit level with the ground. The outside of the valance should align with the outside of the tent. The inside of the valance should be vertical.

3D diagram of a simple rectangular structure with a 90-degree angle标注 (no text or symbols beyond the angle marker)

28) Place rubber pole feet under support pole (BLACK RA & RC)

Simple diagram showing a red object partially submerged in a gray liquid, with no text or symbols present.

CARING FOR YOUR TENT

• Never store your tent wet.
• If you must pack your tent down while still wet, hang to dry as soon as possible to prevent mildew damage.
• Remove dirt, tree sap, and bird droppings with a soft brush and warm water before packing down.
• Do not use detergents to clean your tent. This will damage the waterproofing of the tent fabric.
• When rolling up your tent ensure there is no condensation on the floor.
• If you do get mildew forming on your tent, remove the pours with warm water and a soft brush to prevent further growth.

- It is not advisable to re-coat your canvas as a precautionary measure. This will reduce the breathability and durability of Your tent. Freedom Canvases are pre-coated and will stay waterproof and breathable for many years.

- When Storing your tent over the winter, do not store directly on concrete floors.