CST61 - Range hood CDA - Free user manual and instructions
Find the device manual for free CST61 CDA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range Hood |
| Brand | CDA |
| Model | CST61 |
| Width | 60 cm / 23.6 inches |
| Height | 13 cm / 5.1 inches |
| Depth | 50 cm / 19.7 inches |
| Weight | 12 kg / 26.5 lbs |
| Power Supply | 220-240 V, 50 Hz |
| Motor Power | 200 W |
| Max Airflow | 600 m³/h |
| Noise Level | 55 dB (A) at max speed |
| Number of Speeds | 3 + intensive |
| Lighting | 2 x LED, 3 W each |
| Grease Filter | Aluminum, washable |
| Carbon Filter | Optional, replaceable |
| Control Type | Push buttons |
| Installation | Wall-mounted, ducted or recirculating |
| Energy Class | B |
| Annual Energy Consumption | 50 kWh |
| Fluid Dynamic Efficiency | Class D |
| Lighting Efficiency | Class A |
| Grease Filter Efficiency | Class C |
| Min - Max Airflow (recirculating) | 250 - 450 m³/h |
Frequently Asked Questions - CST61 CDA
How to clean the grease filters of the CDA CST61 range hood?
The aluminum grease filters should be cleaned every 2-3 months. Remove them by pulling the handle downwards. Wash with warm water and mild detergent, or in a dishwasher at low temperature. Dry thoroughly before reinstalling.
How to replace the carbon filter in the CST61?
The carbon filter is used in recirculating mode. Release the grease filter, then rotate the carbon filter to unlock it. Remove the old filter and insert the new one. Lock by rotating and reposition the grease filter. Replace every 3-6 months.
Can the CST61 be used with duct to the outside?
Yes, the CST61 can be installed in ducted mode (air expelled outside) or recirculating mode. For ducted installation, use a suitable ducting pipe (Ø 150 mm). For recirculating, you need to install charcoal filters (purchased separately).
What are the dimensions of the CDA CST61?
The outer dimensions are: width 60 cm, depth 50 cm, and height 13 cm. The chimney dimensions may vary depending on installation height.
How to change the LED lights on the CST61?
The LED lights are integrated and non-replaceable. If a LED fails, contact CDA service for replacement. Do not attempt to dismantle the light module yourself.
What is the noise level of this range hood?
The noise level varies: at minimum speed it is around 45 dB(A), at maximum speed up to 55 dB(A), similar to a normal conversation.
How to connect the range hood to power?
The CST61 requires a 220-240 V 50 Hz supply. It is equipped with a power cord that should be connected to a properly grounded socket. Installation must be done by a qualified electrician.
Where can I buy spare parts for the CDA CST61?
Spare parts such as grease filters, carbon filters, and LED modules are available from CDA authorized dealers or online spare parts retailers. Use the model number CST61 to search.
What is the warranty period for this product?
CDA typically offers a 2-year warranty on parts and labor. Registration may be required. Check your purchase documentation or contact CDA support for precise terms.
How to use the intensive speed function?
Press the intensive speed button (usually marked with a symbol) to activate maximum suction for 10 minutes, after which it automatically returns to the previous speed. This is useful for heavy cooking steam.
User questions about CST61 CDA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual CST61 - CDA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CST61 by CDA.